Golden Brushed Steel Lettering
Hair salons, jewellers and boutique signage where the letters sit directly on a brushed metal backing plate.
View specification
Solid Cutting Letters · Flat Cut Metal Letters
Flat cut brushed stainless letters finished in a golden tone, made from genuine 304 or 316 material with the edge finished as carefully as the face. Very slim strokes and small letter sizes are both possible because the letters are cut from solid rather than fabricated.
Flat cut brushed stainless letters finished in a golden tone, made from genuine 304 or 316 material with the edge finished as carefully as the face. Very slim strokes and small letter sizes are both possible because the letters are cut from solid rather than fabricated.
Best for. Hair salons, jewellers and boutique signage where the letters sit directly on a brushed metal backing plate.
Watch out. Flat cut letters have no return depth, so they read differently from fabricated letters of the same size.
Hair salons, jewellers and boutique signage where the letters sit directly on a brushed metal backing plate. It sits in our salons clinics and boutiques work more often than anywhere else.
A fabricated letter under about 100mm high starts to look clumsy: the return is disproportionate and the soldered seam sits right where the eye is. Flat cut solid stainless removes the return entirely, which is why it is the right construction for small and slim work.
Small independent venues order small quantities of small letters, read from close up, on walls that were not built for signage. That is a different problem from a mall fascia. See the single letter and low volume orders route for how this is specified on a live job.
These points are reproduced from our own production specification for Golden Brushed Steel Lettering. Nothing has been added to them.
| Construction | Solid cut from one piece, no return or cavity |
|---|---|
| Material | Genuine 304 or 316 grade stainless steel |
| Surface finish | Gold finished, brushed |
| Illumination | Not illuminated |
| Fixing method | Back screw bolt, 3M double-sided adhesive tape |
| Supplied with the order | 1:1 scale mounting template |
| Colour matching | Any colour from a Pantone or RAL code confirmed before production |
| Environment | Outdoor and indoor use |
| Production time | 5 to 7 days |
| Shipping | DHL or UPS express door to door, approximately 4 to 5 days |
| Payment terms | T/T, Western Union, PayPal |
| Minimum order quantity | None; any order quantity accepted |
TBC means the figure is not stated on our original specification and has not been estimated.
Genuine 304 or 316 grade stainless steel Finish: gold finished, brushed.
Solid cut from one piece, no return or cavity. Artwork in AI, EPS or CDR fixes the geometry before anything is cut.
Joints are dressed before finishing, and illuminated builds are wired and lit before the back is closed. Formal QC documentation is TBC.
Factory level certification is TBC and is not claimed on this site.
Two builds cut from solid 304 or 316 stainless, one polished and one in a golden brushed finish, with the cut edge finished as carefully as the face.
The alternative constructions in this catalogue are set out in fabricated or flat cut which construction to use, and the illumination choices in frontlit backlit or edge lit.
Flat cut letters have no return depth, so they read differently from fabricated letters of the same size.
The wording is read from close range on a brushed metal backing plate, where a fabricated letter's return and soldered seam would have dominated the small letterforms.
Process GuideThe construction decision is usually made by the letter height, and getting it wrong is visible from two metres away.
DownloadsMaterials, finishes, fixings and lead times in one PDF, plus the full catalogue as a CSV.
Genuine 304 or 316 grade stainless steel. The construction is solid cut from one piece, no return or cavity. Surface finish: gold finished, brushed.
Production runs 5 to 7 days. Add roughly 4 to 5 days for DHL or UPS express door to door, and allow time for artwork approval before production starts.
Fixing is by back screw bolt, 3m double-sided adhesive tape. The order includes 1:1 scale mounting template. Set the letters out from the template rather than by eye.
Flat cut letters have no return depth, so they read differently from fabricated letters of the same size.
Yes. There is no minimum order quantity on this catalogue and any order quantity is accepted. Shipping cost per letter falls sharply once several travel in the same carton, so order a full word together where you can.
Send the artwork and the finished letter height and the quotation comes back with the production window and the shipping estimate attached.