Painting Acrylic Letters 02
Office interiors that want a matching wordmark in two depths, for example reception and meeting rooms.
View specification
Solid Cutting Letters · Acrylic And PVC Letters
Acrylic letters CNC route cut from solid sheet, so the edge is machined square and the face stays flat. Any colour can be painted onto the acrylic once a Pantone code is supplied.
Acrylic letters CNC route cut from solid sheet, so the edge is machined square and the face stays flat. Any colour can be painted onto the acrylic once a Pantone code is supplied.
Best for. Interior branding walls and event signage where acrylic gives the depth without metal costs.
Watch out. Route cutting leaves a slight radius on inside corners; very tight corners need to be drawn with that in mind.
Interior branding walls and event signage where acrylic gives the depth without metal costs. It sits in our salons clinics and boutiques work more often than anywhere else.
Interior branding often needs a lot of letters, a specific colour, and a wall that cannot take weight or drilled fixings. Cut acrylic and PVC answer all three, provided the right one of the two materials is chosen for the traffic the wall gets.
Small independent venues order small quantities of small letters, read from close up, on walls that were not built for signage. That is a different problem from a mall fascia. See the single letter and low volume orders route for how this is specified on a live job.
These points are reproduced from our own production specification for Painting Acrylic Letters 01. Nothing has been added to them.
| Construction | Solid cut from one piece, no return or cavity |
|---|---|
| Material | Translucent or solid acrylic |
| Surface finish | Painted |
| Illumination | Not illuminated |
| Fixing method | Back screw bolt, 3M double-sided adhesive tape |
| Supplied with the order | 1:1 scale mounting template |
| Colour matching | Any colour from a Pantone or RAL code confirmed before production |
| Environment | Outdoor and indoor use |
| Production time | 5 to 7 days |
| Shipping | DHL or UPS express door to door, approximately 4 to 5 days |
| Payment terms | T/T, Western Union, PayPal |
| Minimum order quantity | None; any order quantity accepted |
TBC means the figure is not stated on our original specification and has not been estimated.
Translucent or solid acrylic Finish: painted.
Solid cut from one piece, no return or cavity. Artwork in AI, EPS or CDR fixes the geometry before anything is cut.
Joints are dressed before finishing, and illuminated builds are wired and lit before the back is closed. Formal QC documentation is TBC.
Factory level certification is TBC and is not claimed on this site.
Five builds in solid acrylic and PVC, CNC route cut and painted to a supplied Pantone code.
The alternative constructions in this catalogue are set out in fabricated or flat cut which construction to use, and the illumination choices in frontlit backlit or edge lit.
Route cutting leaves a slight radius on inside corners; very tight corners need to be drawn with that in mind.
Office interiors that want a matching wordmark in two depths, for example reception and meeting rooms.
View specification
Retail interiors where the wall finish rules out drilling and tape is the only option.
View specification
Temporary and budget interior signage, exhibition stands and short-run promotional wording.
View specification
Large interior wording where weight on the wall is the limiting factor.
View specificationThe interior needed a glowing outline rather than a lit face, in a space where a frontlit letter would have read as a light fitting.
Process GuideThe construction decision is usually made by the letter height, and getting it wrong is visible from two metres away.
DownloadsMaterials, finishes, fixings and lead times in one PDF, plus the full catalogue as a CSV.
Translucent or solid acrylic. The construction is solid cut from one piece, no return or cavity. Surface finish: painted.
Production runs 5 to 7 days. Add roughly 4 to 5 days for DHL or UPS express door to door, and allow time for artwork approval before production starts.
Fixing is by back screw bolt, 3m double-sided adhesive tape. The order includes 1:1 scale mounting template. Set the letters out from the template rather than by eye.
Route cutting leaves a slight radius on inside corners; very tight corners need to be drawn with that in mind.
Yes. There is no minimum order quantity on this catalogue and any order quantity is accepted. Shipping cost per letter falls sharply once several travel in the same carton, so order a full word together where you can.
Send the artwork and the finished letter height and the quotation comes back with the production window and the shipping estimate attached.