LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
Cat7 Cable 305M — CAT7 manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT7 Cable

Cat7 Cable 305M

Network Lan Gigabit 10GBit 23AWG Ethernet Cable Cat7 SFTP Installation Cable Oxygen-free Copper Wires Indoor LSZH RJ45 Shielded

Cat7 Cable 305M is a SFTP CAT7 bare copper cable from the LANP CAT7 Cable range, specified for internal runs. The original specification reads: Network Lan Gigabit 10GBit 23AWG Ethernet Cable Cat7 SFTP Installation Cable Oxygen-free Copper Wires Indoor LSZH RJ45 Shielded.

It is supplied with a LSZH jacket, packed as 305 m. MOQ runs from 100 m for a trial reel up to production runs of 50,000 m, with bulk production typically 3-7 days from PO confirmation.

CategoryCAT7 Cable
ShieldingSFTP
Conductorbare copper
JacketLSZH
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Bare Copper Conductor

Bare copper is what Cat7 Cable 305M is built on, which is why it holds its resistance figure across the full drum instead of only at the start of it.

SFTP Screening

Screening on Cat7 Cable 305M is SFTP. It buys interference margin in electrically noisy buildings, provided the screen is terminated into matching hardware.

LSZH Jacket Option

The LSZH jacket option on Cat7 Cable 305M matters where people have to escape through the space the cable is in — it emits far less smoke and no halogens when it burns.

23 AWG Conductor

Conductor size on Cat7 Cable 305M is 23 AWG, and it is verified by resistance measurement on every batch rather than taken from the extruder setting.

OEM Branding Available

From 1 km we print your brand on Cat7 Cable 305M rather than putting a sticker on the carton. Packaging design support comes with it.

Tested Before It Ships

Testing on Cat7 Cable 305M happens at the factory, not at your warehouse: continuity end to end, conductor resistance, and dielectric strength on the finished cable.

Technical Data

Specification Sheet

Values below are the factory specification for Cat7 Cable 305M. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameCat7 Cable 305M
CategoryCAT7 Cable
Cable ClassCAT7
ShieldingSFTP — foil per pair plus overall tinned copper braid
Conductor Materialbare copper
Conductor Gauge23 AWG
Jacket MaterialLSZH
ConnectorRJ45 8P8C, gold-plated contacts
InstallationIndoor
Packaging305 m
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT7 specification
  • SFTP — foil per pair plus overall tinned copper braid
  • RJ45 8P8C, gold-plated contacts
  • Jacket printed with specification and rating as standard

Materials

  • Conductor: bare copper
  • Jacket: LSZH
  • Screen: aluminium foil per pair plus overall tinned copper braid

Who It Is For

  • Industrial and process facilities with heavy electrical plant
  • Broadcast, medical and laboratory installations
  • Buildings cabled for a long service life
  • Integrators standardising on fully screened systems

Problems It Solves

  • Interference coupling into data links from nearby motors and drives
  • Installations expected to stay in service across several equipment generations
  • Screen terminations done badly, which removes the benefit entirely
  • Cable stiffness fighting tight bends in a retrofit route

Application Scenarios

  • Data runs through plant rooms and next to variable speed drives
  • Imaging and laboratory equipment links
  • Studio and outside broadcast infrastructure
  • Long-life building infrastructure projects
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Foil and braid shielding

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester

Certification

  • HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design
Use Guide

Installing It Without Losing Performance

  • Do not force Cat7 Cable 305M through a route. Stretching the conductors changes the twist geometry permanently, and the damage is invisible until the tester finds it.
  • Terminate Cat7 Cable 305M with the twist maintained as close to the contact as possible. This single habit accounts for most first-time certification passes.
  • Respect the bend radius on Cat7 Cable 305M, especially in the last stretch into the patch panel where a full bundle is being dressed into a tight space.
  • A SFTP cable like Cat7 Cable 305M needs shielded panels, shielded cords and a continuous earth path. Break the chain anywhere and the screen stops working everywhere.

Before a first bulk order of Cat7 Cable 305M: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT7 Cable Range

See all 5 cat7 cable products →

CAT7CAT7 Cable Orange — CAT7 manufactured by LANP CABLE

CAT7 Cable Orange

CAT7 Ethernet Cable SSTP SFTP High Speed 10Gbps 600MHz Shielded Category 7 Bare Copper 0.6mm…

SFTP22 AWGOrange
View specification →
CAT7Cat7 Cable 1000ft — CAT7 manufactured by LANP CABLE

Cat7 Cable 1000ft

Ethernet RJ45 22AWG CAT7 LAN Cable Computer Modem SFTP Shielded Internet Twisted Pair 0.6mm…

SFTP22 AWG
View specification →
CAT7Cat7 Cable Purple — CAT7 manufactured by LANP CABLE

Cat7 Cable Purple

305M Cat7 Ethernet Cable 10Gbps Cat7 S/FTP OFC LSZH Shielded Network Cord for Industry Home…

SFTPPurple
View specification →
CAT7Cat7 Cable White — CAT7 manufactured by LANP CABLE

Cat7 Cable White

SFTP Cat7 Shielded And Foiled Twisted Pair Network Ethernet Installation Cable 600MHZ Copper…

SFTP22 AWGWhite
View specification →

Related guides

Where it is installed

Questions

Cat7 Cable 305M — Questions

Is the conductor in Cat7 Cable 305M really bare copper?

It is. Cat7 Cable 305M is specified as bare copper and the batch resistance record is available with the shipment if you want to check it.

How is Cat7 Cable 305M packed?

Standard packing for Cat7 Cable 305M is 305 m; reel or coil length can change on a production run if your installers want a different unit.

Can you print our brand on Cat7 Cable 305M?

From 1 km we extrude your brand onto the Cat7 Cable 305M jacket itself. Under that minimum the branding goes on packaging instead.

What is the minimum order and lead time for Cat7 Cable 305M?

Cat7 Cable 305M is available from a 100 m sample reel through to 50,000 m production runs, with typical bulk lead times of 3-7 days.

Is Cat7 Cable 305M covered by a compliance certificate?

Yes — the HKTC attestation covering our LAN cable range applies to Cat7 Cable 305M. A copy is issued with the shipment.

Request pricing on Cat7 Cable 305M

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue