LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
Cat7 Cable 1000ft — CAT7 manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT7 Cable

Cat7 Cable 1000ft

Ethernet RJ45 22AWG CAT7 LAN Cable Computer Modem SFTP Shielded Internet Twisted Pair 0.6mm Copper LSZH POE DATA Networking

Cat7 Cable 1000ft sits in the LANP CAT7 Cable range as a SFTP CAT7 build. As catalogued by the factory: Ethernet RJ45 22AWG CAT7 LAN Cable Computer Modem SFTP Shielded Internet Twisted Pair 0.6mm Copper LSZH POE DATA Networking.

It is supplied with a LSZH jacket, packed as 1000 ft. Order quantities start at 100 m for evaluation and scale to 50,000 m per run, at a typical bulk lead time of 3-7 days.

CategoryCAT7 Cable
ShieldingSFTP
JacketLSZH
Gauge22 AWG
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

SFTP Screening

The SFTP screen on Cat7 Cable 1000ft is there for routes that share containment with power cable or pass through plant areas. Bond it at the panel and the link stays stable.

LSZH Jacket Option

LSZH on Cat7 Cable 1000ft is a life safety decision rather than a general upgrade. Specify it for stairwells, corridors and public buildings.

22 AWG Conductor

Cat7 Cable 1000ft runs a 22 AWG conductor. Gauge is the figure that decides PoE reach and heat rise in a full bundle, so it is measured, not assumed.

Packed As You Handle It

Cat7 Cable 1000ft ships as 1000 ft, so the format matches how the cable is actually handled on site rather than how it is easiest to wind.

OEM Branding Available

From 1 km we print your brand on Cat7 Cable 1000ft rather than putting a sticker on the carton. Packaging design support comes with it.

Tested Before It Ships

Testing on Cat7 Cable 1000ft happens at the factory, not at your warehouse: continuity end to end, conductor resistance, and dielectric strength on the finished cable.

Technical Data

Specification Sheet

Values below are the factory specification for Cat7 Cable 1000ft. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameCat7 Cable 1000ft
CategoryCAT7 Cable
Cable ClassCAT7
ShieldingSFTP — foil per pair plus overall tinned copper braid
Conductor Gauge22 AWG
Conductor Diameter0.6 mm
Jacket MaterialLSZH
ConnectorRJ45 8P8C, gold-plated contacts
Packaging1000 ft
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT7 specification
  • SFTP — foil per pair plus overall tinned copper braid
  • RJ45 8P8C, gold-plated contacts
  • Jacket printed with specification and rating as standard

Materials

  • Jacket: LSZH
  • Screen: aluminium foil per pair plus overall tinned copper braid

Who It Is For

  • Industrial and process facilities with heavy electrical plant
  • Broadcast, medical and laboratory installations
  • Buildings cabled for a long service life
  • Integrators standardising on fully screened systems

Problems It Solves

  • Interference coupling into data links from nearby motors and drives
  • Installations expected to stay in service across several equipment generations
  • Screen terminations done badly, which removes the benefit entirely
  • Cable stiffness fighting tight bends in a retrofit route

Application Scenarios

  • Data runs through plant rooms and next to variable speed drives
  • Imaging and laboratory equipment links
  • Studio and outside broadcast infrastructure
  • Long-life building infrastructure projects
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Foil and braid shielding

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester

Certification

  • HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design
Use Guide

Installing It Without Losing Performance

  • Use a pulling grip on Cat7 Cable 1000ft rather than hand tension, and pull steadily. Jerked pulls are what turn a good drum into a failed link.
  • Every millimetre of untwisted conductor at a Cat7 Cable 1000ft termination is unprotected cable. Strip back only as far as the contact block actually needs.
  • Tight bends deform the pairs inside Cat7 Cable 1000ft and change impedance at that point. The panel end is where this is most often violated.
  • A SFTP cable like Cat7 Cable 1000ft needs shielded panels, shielded cords and a continuous earth path. Break the chain anywhere and the screen stops working everywhere.

Before a first bulk order of Cat7 Cable 1000ft: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT7 Cable Range

See all 5 cat7 cable products →

CAT7CAT7 Cable Orange — CAT7 manufactured by LANP CABLE

CAT7 Cable Orange

CAT7 Ethernet Cable SSTP SFTP High Speed 10Gbps 600MHz Shielded Category 7 Bare Copper 0.6mm…

SFTP22 AWGOrange
View specification →
CAT7Cat7 Cable 305M — CAT7 manufactured by LANP CABLE

Cat7 Cable 305M

Network Lan Gigabit 10GBit 23AWG Ethernet Cable Cat7 SFTP Installation Cable Oxygen-free…

SFTP23 AWG
View specification →
CAT7Cat7 Cable Purple — CAT7 manufactured by LANP CABLE

Cat7 Cable Purple

305M Cat7 Ethernet Cable 10Gbps Cat7 S/FTP OFC LSZH Shielded Network Cord for Industry Home…

SFTPPurple
View specification →
CAT7Cat7 Cable White — CAT7 manufactured by LANP CABLE

Cat7 Cable White

SFTP Cat7 Shielded And Foiled Twisted Pair Network Ethernet Installation Cable 600MHZ Copper…

SFTP22 AWGWhite
View specification →

Related guides

Where it is installed

Questions

Cat7 Cable 1000ft — Questions

How is Cat7 Cable 1000ft packed?

Standard packing for Cat7 Cable 1000ft is 1000 ft; reel or coil length can change on a production run if your installers want a different unit.

Can you print our brand on Cat7 Cable 1000ft?

Yes, from 1 km per specification. Below that Cat7 Cable 1000ft ships with neutral print and your branding goes on the box and reel label.

What is the minimum order and lead time for Cat7 Cable 1000ft?

A trial reel of 100 m is enough to evaluate Cat7 Cable 1000ft. Production runs go to 50,000 m and take about 3-7 days once the PO is confirmed.

Is Cat7 Cable 1000ft covered by a compliance certificate?

Yes — the HKTC attestation covering our LAN cable range applies to Cat7 Cable 1000ft. A copy is issued with the shipment.

Request pricing on Cat7 Cable 1000ft

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue