60 systems
Bottle and Container Visual Inspection Machines
For pharmaceutical, beverage and dairy bottle producers who cannot pass a black spot or a damaged neck finish to the filler.
Industry
Pharmaceutical packaging
Pharma packaging buyers audit their suppliers. An inspection machine with a defined, adjustable acceptance standard is easier to defend in an audit than a table of operators.
What goes wrong in this sector
Pharmaceutical bottle and closure production carries a higher consequence for escapes than most packaging work, and the defect list is stricter: contamination, black spots, deformation, thread damage and any foreign matter on a surface that will contact product.
Our systems have been deployed in this sector alongside injection blow moulding equipment, inspecting incoming bottles for appearance defects such as black spots, uneven thickness and dirt, with counting, sorting and online rejection built in. The acceptance standard is set by your quality team on the machine, not fixed by us.
Defects that cost you money here
- Foreign matter and black spots on product-contact surfaces
- Neck finish and thread damage compromising the closure seal
- Inconsistent manual sorting that cannot be evidenced in an audit
- Defect rates that only surface after the lot has shipped
Machine families used in pharmaceutical packaging
73 systems
Cap and Closure Visual Inspection Machines
The largest family in our range. These systems inspect plastic closures for water, beverage, dairy, daily chemical and pharmaceutical packaging at production speed, and remove the failures without stopping the line.
21 systems
PET Preform Inspection and Sorting Systems
The core machine in an automated preform quality line, sitting between the moulder and the blower where a bad preform is still cheap to remove.
Representative configurations
A starting point, not a fixed recommendation. The final configuration comes from your parts and defect samples.
Bottle Visual Inspection
Full Automatic AI Bottle Vision Inspection System with 8 Cameras for Plastic Package
Inspection Speed: 150~300pcs/min
View specification →Bottle Visual Inspection
New Design 8 Cameras Full Automatic Plastic Pharma Bottle Visual Defect Inspection System
Inspection Speed: 150~300pcs/min
View specification →Cap Visual Inspection
Reliable Cap Visual Inspection System with 6-Camera High-Speed AI Full-Area Defect Detection
Inspection Speed: 300pcs/min~2500pcs/min
View specification →
Cap Visual Inspection
High Speed 6 Cameras Wine Cap Visual Inspection Machine for Beverage Industry
Inspection Speed: 300~2500pcs/min
View specification →PET Preform Inspection
Customized 11 Camera AI-Powered PET Preform Vision Inspection System with Soft Dropping
Inspection Speed: 500~800pcs/min
View specification →PET Preform Inspection
Offline AI-Powered Reliable Plastic Bottle Preform Visual Inspection Machine with 7 Cameras
Inspection Speed: 150~600pcs/min
View specification →Other industries we serve
Quality control for pharmaceutical packaging
Send the part and the defect list and we will tell you what the inspection actually needs to be.