Woodworking Finishing Machinery Since 1999
INCRI MachineryRequest A Quote
INCRI woodworking finishing machinery assembled in the Qingdao production hall
INCRI automatic UV roller coating line with conveyor, coater and dryer sections
Close view of the coating roller and doctor roller inside an INCRI roller coater
Wood Finishing Machinery Since 1999

Finishing Lines That Put A Repeatable Surface On Every Panel

Sanding, coating, drying and membrane pressing machines for kitchen cabinet, door, flooring and panel furniture plants. Built in Qingdao, shipped to more than 20 countries.

Request A QuoteSee All 103 Machines
What We Make

Machines That Put The Surface On A Wood Panel

INCRI builds the machines that put the surface on a wood panel: sanding, putty filling, roller and curtain coating, staining, spraying, IR levelling, UV curing, membrane pressing, wire brushing, and the conveyors, turnover tables and gantry loaders that join them into one line.

Who We Serve

Kitchen cabinet plants, interior door factories, solid wood and engineered flooring producers, panel furniture makers and contract finishers. Machines have shipped to more than 20 countries including Russia, Singapore, Uzbekistan, the USA, Malaysia, Peru, Colombia, Vietnam and Slovakia.

What Problem We Solve

Surface finishing is where wood plants lose money: paint wasted as overspray, panels rejected for nibs and orange peel, a spray shop that needs a dozen painters, and a finish that changes with whoever is on shift. Every machine in the range removes one of those losses, and a full INCRI line replaces 8 to 12 painting workers with a crew of three.

Why Buy From INCRI

A finishing line supplier since 1999, building single machines and complete lines from the same catalogue, so the sander, the coater and the dryer are specified to work together instead of being bought from three suppliers and made to fit on site.

1999
Building Finishing Machines Since
103
Machines In The Range
20+ countries
Export Markets
5000 m2 per day
Roller Coating Line Capacity
3 operators
Spray Line Crew
Around the clock
Technical Support
The Range

One Machine From Every Part Of The Finishing Line

Every machine below is built to order. Working width, head count, lamp count and control system are specified per order.

Browse All 103 Machines
Who We Serve

Built For Plants That Finish Wood At Volume

Kitchen Cabinet Manufacturing

Cabinet plants live or die on the door front. INCRI covers every way of finishing one: membrane pressing PVC film, roller coating a flat slab, sprayin...

Interior Door Production

Door plants measure output in doors per hour, and finishing is usually where the hour goes. The door range runs from an 8800 mm spray bed sized around...

Solid Wood And Engineered Flooring

Flooring is finished on both faces: a durable coated top and a sealed back that stops the board cupping. INCRI builds the back coater, the stain machi...

Panel Furniture Manufacturing

Flat panel plants need throughput. The three head roller coater, the curtain coater and the 5000 square metre a day roller coating line are all built ...

WPC And Decorative Panel

Synthetic and composite boards take texture and coating differently from solid wood. The wire brush machine cleans and textures WPC surfaces, and the ...

Contract Finishing And Coating Services

A contract finisher runs other people's work, which means mixed batches, mixed colours and no room for a finish that depends on the operator. Quick re...

Solutions

Complete Routes Through The Finishing Process

A line is not a pile of machines. These are the five routes INCRI builds end to end, with the problem each stage is there to solve.

UV Flat Panel Coating Line

From raw board to a cured UV surface on a flat panel, with every stage sized so nothing waits on the stage before it....

Shaped Door Spray Finishing

Routed and moulded fronts cannot be roller coated. This is the spray route, from a crew of twelve down to a crew of three....

Membrane Press Door Front Production

The PVC and PET film route for routed MDF fronts, from CNC to a pressed door that does not lift at the groove....

Flooring Surface And Back Seal

Both faces of a floorboard matter. This covers the textured and stained top face and the sealed back that keeps the board flat in service....

Line Automation And Panel Handling

The machines between the machines. Loading, transferring, turning and returning panels is where most of the remaining manual labour in a fin...

Inside The Factory

Machines Assembled And Run Before They Are Loaded

INCRI machinery assembly hall in Qingdao with finishing machines in build
The assembly hall in Jinling Industrial Park. Machines are almost fully assembled before they are loaded into the container.
Complete INCRI UV roller coating line with conveyor coater and dryer sections
A complete roller coating line set up and run before shipment, so the machines are proven together rather than only apart.
INCRI skin feel membrane coating line laid out end to end
An inert coating line laid out end to end. Layout design is done against your building before the machines are quoted.
Machines are almost fully assembled before loading into the container, so installation in your workshop is straightforward. Video guidance and an English manual are supplied free, and an engineer can travel to site on request.
Knowledge Centre

Guides Written For People Buying Finishing Equipment

Product Guide

What Is Inside An INCRI Roller Coating Machine

Frame, lifting device, coating roller and transmission: the four parts of a roller coater that decide whether film weight stays constant after two years of production.

Product Guide

Paint Circulation And Control On An INCRI Roller Coater

The stainless steel reflux tank, the heating bucket for UV paint and the electrical components that keep coating thickness constant through a shift.

Process Guide

How A Wire Brush Machine Works And What It Can Texture

Which products the machine suits, the working widths and thickness range, and what the disc brush swing device actually changes about the finished texture.

All Articles

Questions Buyers Ask Before Ordering

Do you offer installation?

Machines are almost fully assembled before they are loaded into the container, so installation in your workshop is straightforward. Video guidance and an English manual are provided free. An engineer can be sent to site on request, with all costs in the buyer's account: two way transport between China and your factory, visa and insurance, hotel and meals in your country, plus USD 200 per day labour.

Where can we get replacement parts?

Most spare parts are held in stock and are sent to the buyer directly from our warehouse at original prices.

How long does it take to get replacement parts?

Common spare parts can be delivered by express within one week. Some parts can be purchased locally.

What technical support do you offer?

Technical support by phone, email or WhatsApp and Skype around the clock, an English version manual with operation video, and an engineer available to service machinery overseas.

Do you have machines in our country?

Machines have been sold to more than 20 countries, including Russia, Singapore, Uzbekistan, the USA, Malaysia, Peru, Colombia, Vietnam and Slovakia.

Can the machine be customised?

Yes. Machines are customised to the buyer's requirement, which is how almost every order is built.

What other machines do you offer?

A one-stop range of woodworking machines: sanding machines, UV dryers, roller coating machines, painting machines and conveyors.

Tell Us What You Are Finishing And We Will Draw The Line

Send the panel size, the coating system and the output you need. You will get a layout, a machine list and a quotation.

Request A QuoteEmail An Engineer