Positive Yarn Feeders for Knitting Machines
Positive storage feeders, jacquard yarn feeders and lycra feeders that deliver yarn at a controlled rate so loop length stays constant around the machine.
121 part numbers listed · page 1 of 3

Yarn Feeders in This Catalogue
Yarn Feeder AccessoriesCeramic Disc for Circular Knitting Machine
Yarn FeedersEFS 800-ELECTRONIC Yarn Feeder for Circular Knitting Machine800-ELECTRONIC
Yarn Feeder AccessoriesKnot Catcher FOR Circular Knitting Machine
Yarn FeedersLycra Feeder for Circular Knitting Machines (Item 1)
Yarn FeedersLycra Feeder for Circular Knitting Machines (Item 2)
Yarn Feeder AccessoriesMagnetic Disc for Circular Knitting Machine
Yarn Feeder AccessoriesSpring Tension FOR Circular Knitting Machine
Yarn FeedersStriper Feeder for Circular Knitting Machines
Yarn FeedersYarn Feeder
Yarn FeedersYarn Feeder APF10-P4APF10-P4
Yarn FeedersYarn Feeder APF10-P4BAPF10-P4B
Yarn FeedersYarn Feeder APF10-P9APF10-P9
Yarn FeedersYarn Feeder APF10-T9APF10-T9
Yarn FeedersYarn Feeder APF20-DPAPF20-DP
Yarn FeedersYarn Feeder APF20-DTAPF20-DT
Yarn FeedersYarn Feeder APF20-P2APF20-P2
Yarn FeedersYarn Feeder APF20-P4BAPF20-P4B
Yarn FeedersYarn Feeder APF20-P7APF20-P7
Yarn FeedersYarn Feeder APF20-P9APF20-P9
Yarn FeedersYarn Feeder APF20-T4APF20-T4
Yarn FeedersYarn Feeder APF20-T4AAPF20-T4A
Yarn FeedersYarn Feeder APF20-T6AAPF20-T6A
Yarn FeedersYarn Feeder APF20-T9APF20-T9
Yarn FeedersYarn Feeder APF20-T9AAPF20-T9A
Yarn FeedersYarn Feeder APF30-P7APF30-P7
Yarn FeedersYarn Feeder APF30-P9APF30-P9
Yarn FeedersYarn Feeder APF30-T7APF30-T7
Yarn FeedersYarn Feeder APF30-T9APF30-T9
Yarn FeedersYarn Feeder BPF20-P13BPF20-P13
Yarn FeedersYarn Feeder BPF20-P7BPF20-P7
Yarn FeedersYarn Feeder BPF20-P9BPF20-P9
Yarn FeedersYarn Feeder BPF20-T13BPF20-T13
Yarn FeedersYarn Feeder BPF20-T13.BPF20-T13
Yarn FeedersYarn Feeder BPF20-T4BPF20-T4
Yarn FeedersYarn Feeder BPF20-T7BPF20-T7
Yarn FeedersYarn Feeder BPF20-T7.BPF20-T7
Yarn FeedersYarn Feeder BPF20-T9BPF20-T9
Yarn FeedersYarn Feeder CPF20-T11CPF20-T11
Yarn FeedersYarn Feeder CPF20-T8CPF20-T8
Yarn FeedersYarn Feeder CPF20-T8-HOLECPF20-T8-HOLE
Yarn FeedersYarn Feeder DPF-3-BDPF-3-B
Yarn FeedersYarn Feeder DPF-4BDPF-4B
Yarn FeedersYarn Feeder DPF1-BDPF1-B
Yarn FeedersYarn Feeder DPF2-2-BDPF2-2-B
Yarn FeedersYarn Feeder DPF2-3-BDPF2-3-B
Yarn FeedersYarn Feeder DPF2-4-BDPF2-4-B
Yarn FeedersYarn Feeder GPF20-B25GPF20-B25
Yarn FeedersYarn Feeder HPF200HPF200What This Part Does
A positive feeder drives yarn forward at a set rate instead of letting the needles pull it off the cone. Because the delivery rate is fixed by the drive belt and the wheel, every feeder in the machine supplies the same length of yarn per revolution, which is what keeps loop length and fabric weight stable.
A storage feeder winds a reserve of yarn on a drum and feeds it off under low, even tension, which smooths out the tension peaks that come from the cone. Multi function and jacquard feeders add the ability to feed intermittently in step with the pattern, and lycra feeders drive elastane at a controlled draft.
Why Buy From Us
- Even loop length across all feeders, which is the first condition for even fabric weight
- Lower and steadier yarn tension than a machine fed straight from the cone
- Storage drum smooths the tension peaks that cause needle and yarn breaks
- Separate feeder types for plain, jacquard and elastane positions
Groups Within Yarn Feeders
Where It Is Used
- Single jersey, rib and interlock circular knitting machines
- Jacquard machines needing intermittent feed in step with the pattern
- Elastane and lycra plating positions
- Terry, fleece and plush machines
- Machines running fine count yarn where tension control decides the fabric appearance
Who It Is For
- Mills converting a machine from negative to positive feed
- Knitters chasing weight variation between machines or between runs
- Maintenance teams replacing feeders that no longer hold rate
- Machine dealers refitting used machines before resale
Problems It Solves
- Fabric weight varying from machine to machine or shift to shift
- Barre and horizontal shading caused by feeders delivering at different rates
- Yarn breaks from tension peaks pulled directly off the cone
- Elastane draft drifting, which changes fabric width and recovery
What to Send Us When You Order
- Feeder model and the reference printed on the feeder body
- Machine builder, model, diameter, gauge and number of feeders
- Whether the position is plain, jacquard or elastane
- Belt type in use, and drive voltage where the feeder is powered
- A photo of the feeder mounted on the machine
Related Reading and Applications
- Knitted Fabric Mills
- Underwear and Sportswear Fabric
- Machine Dealers and Rebuilders
- Spare Parts Distributors
- Identifying a Part From a Photo
- Holding Loop Length and Fabric Weight
- Parts Package for a Machine Overhaul
- Positive Feeding Explained
- Reading Timing Belt References
- Measuring Fabric Weight
- Identifying a Part Without a Reference
Yarn Feeders Questions
What is the difference between a storage feeder and a positive feeder?
A storage feeder holds a reserve of yarn on a drum and releases it at even tension. A positive feeder drives a fixed length of yarn per machine revolution. Many feeders do both, which is why the same unit is often called a positive storage feeder.
Can I mix feeder models on one machine?
It is better not to. Different feeder models can deliver slightly different rates at the same belt speed, and that difference lands in the fabric as shading.
Do feeders need a special belt?
They run on a toothed timing belt around the machine. Belt type, tooth pitch and length have to suit the feeder and the machine, so order belts and feeders together when you can.
How do I set the delivery rate?
Delivery rate is set by belt speed and the driven wheel diameter, then checked by measuring loop length on the fabric. Adjust in small steps and re-measure.
Do you supply feeder spare parts as well as complete feeders?
Yes. Feeder accessories are listed in their own group in this catalogue.
Send Your Machine Details and Get a Quote
Builder, model, diameter and gauge, plus a photo of the old part. That is all we need to match it.
Contact Matthew · [email protected] · WhatsApp and WeChat 0086-18910628679






