Spring Tension FOR Circular Knitting Machine
Wheels, brackets and small parts that keep a positive feeder driving at the rate it was set to.
- Part groupYarn Feeder Accessories
- Supplied byHUAXIATEX, Beijing
Send a photo of the old part beside a ruler and we will confirm the match before you order.
Product Overview
Spring Tension FOR Circular Knitting Machine is listed in our yarn feeder accessories group for circular knitting machine maintenance. Wheels, brackets and small parts that keep a positive feeder driving at the rate it was set to.
What This Part Does
Most feeder faults are not in the feeder body but in the parts around it, the drive wheel, the bracket, the guide eyelets and the small wear parts that hold the yarn path in line. Replacing these is far cheaper than replacing the feeder.
Key Benefits
- Restores the original delivery rate without buying a complete feeder
- Small parts kept as consumables reduce downtime during a machine service
- Wheels and brackets matched to the feeder models in this catalogue
Application Scenarios
- Routine feeder servicing during machine maintenance
- Rebuilding feeders taken off used machines
- Correcting a bent or loose feeder mounting
Who It Is For
- Maintenance teams servicing their own feeders
- Dealers refurbishing feeders for resale
Problems It Solves
- Slip at the drive wheel, which lowers the delivered length without any obvious fault
- Feeder no longer square to the machine after a knock
- Worn guide parts on the feeder inlet cutting fine yarn
Specifications
| Product name | Spring Tension FOR Circular Knitting Machine |
|---|---|
| Part group | Yarn Feeder Accessories |
| Machine type | Circular knitting machines |
| Supplier | Beijing Huaxiatex Co. Ltd., Beijing, China |
| Listed reference photo | Supplied from our own product records |
Only values printed on the product name and in our own records are listed here. Dimensions, material and hardness are confirmed against your machine before you order, not assumed.
What to Send Us When You Order
- Feeder model the part belongs to
- A photo of the part fitted, and of the part removed
- Quantity and how many feeders you are servicing
Use Guide
- Confirm the reference against the old part and the machine plate before ordering a full machine set.
- Order one complete set per machine where the part is fitted in multiples, so wear is even across the fabric.
- Clean the mounting position before fitting. Fly and old oil are the most common cause of a new part not seating.
- Check the machine on a short run and measure the fabric before returning it to full production.
- Record the reference against the machine so the next reorder does not have to be identified again.
Yarn Feeder Accessories Questions
Can I fit accessories from one feeder brand to another?
Usually not. Tell us the feeder model and we will confirm what fits it.
How often should feeder wear parts be changed?
Change them when the delivered loop length can no longer be held steady, or during a planned machine overhaul, whichever comes first.
Ask About Spring Tension FOR Circular Knitting Machine
Tell us your machine builder, model, diameter and gauge, and how many machines you are covering.
Contact Matthew · [email protected] · WhatsApp and WeChat 0086-18910628679