XSZ7045-STL3 7-45X Zoom Stereo Microscope

Key Benefits

• 100mm working distance allows a soldering iron, tweezers or probe to operate under the optics
• 1:6.4 zoom ratio covers a 28.6mm field down to 4.4mm without swapping objectives
• Magnification extends to 7X-45X with optional eyepieces and objectives, avoiding stand replacement
• Binocular or trinocular head configuration supports both operator viewing and camera integration
• Greenough optical system maintains true stereo depth across the full zoom range

Application Scenarios

• SMD rework at the bench with hands working under the optics while monitoring the image on a screen
• Incoming inspection of connectors, contacts and moulded parts against a drawing
• Wire bond and solder joint documentation for a customer quality report
• Teaching a rework technique to a group from one screen instead of one eyepiece
• Watch, jewellery and micro-mechanical assembly where hands work under the optics

Who It Is For

• Electronics repair and rework benches handling SMD and BGA work
• Quality departments that must attach photographs to inspection records
• Training rooms in electronics assembly plants
• Precision assembly workshops in watchmaking, jewellery and micro-mechanics

Problems It Solves

• A stereo head with no camera forces the operator to describe defects instead of showing them
• Short working distance instruments leave no room for a soldering iron under the optics
• Fixed magnification stands make an operator swap objectives between locating a fault and inspecting it
• Separate camera and microscope purchases often fail to match the tube diameter and eyepiece field

Technical Features

• Greenough optical system with a genuine stereo view at both ends of the zoom range
• Interpupillary adjustment 55~75mm for operator-to-operator handover
• 1:6.4 zoom ratio provides continuous magnification from 0.7X to 4.5X
• 100mm working distance under the 1X objective allows clearance for tools
• Binocular or trinocular head configuration available on the same body
• Optional eyepieces and auxiliary objectives extend the magnification range to 3.5X-270X

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Binocular or trinocular head on the same XSZ7045 body
• Auxiliary objectives from 0.3X to 2X to move the working distance between 30mm and 165mm
• Eyepieces from WF15X through 30X to extend the magnification to 3.5X-270X
• Alternative stands from the stereo microscope stand range

Comparison With Other Options

Use Guide

• Set the interpupillary distance between 55mm and 75mm before focusing, or the two channels will not merge
• Focus at the highest magnification first, then zoom out, so the image stays in focus across the range
• Keep the 100mm standard working distance in mind when choosing a soldering iron and holder for the bench
• Connect the camera to a USB2.0 or faster port; the camera draws its power from the same cable
• Expect 7 frames per second at the full 2048*1536 resolution, and drop the capture resolution if you need smoother live motion