XSZ7045-STL8 7-45X Zoom Stereo Microscope

Key Benefits

• 100mm working distance allows tools like soldering irons, tweezers or probes to operate under the optics
• 1:6.4 zoom ratio covers 28.6mm to 4.4mm field of view without changing objectives
• Binocular or trinocular head supports simultaneous visual observation and camera capture
• Optional eyepieces and objectives extend magnification to 3.5X-270X without changing the stand
• Standard 1X objective with 0.7X~4.5X zoom gives a broad range for locating and inspecting components

Application Scenarios

• SMD rework where a soldering iron must stay under the optics while inspecting a joint
• Incoming inspection of small mechanical parts, connectors or moulded components
• Teaching micro-assembly techniques with a single image projected to a group
• Jewellery or watchmaking assembly where hands work under the optics with visual feedback
• Quality inspection requiring documentation of solder joints or surface defects

Who It Is For

• Electronics repair and rework benches handling SMD and BGA components
• Quality departments needing to document defects with images attached to reports
• Teaching labs in electronics, engineering or precision assembly programs
• Jewellery, watchmaking and micro-mechanical workshops
• Inspection lines for small parts in medical devices or consumer electronics

Problems It Solves

• Fixed magnification stands require objective changes between locating and inspecting a defect
• Short working distance instruments block the use of tools like soldering irons under the head
• Separate camera and microscope setups often mismatch tube diameter or eyepiece field
• Lack of optional magnification extension forces replacement of the entire stand for finer work
• No stereo view in digital-only microscopes reduces depth perception during hand-guided tasks

Technical Features

• Greenough optical system provides true stereo depth perception across the zoom range
• Interpupillary adjustment 55~75mm for ergonomic handover between operators
• 1:6.4 zoom ratio enables continuous magnification from 0.7X to 4.5X
• 1X objective with 100mm working distance supports tool clearance under the optics
• Binocular or trinocular head configuration allows dual use of eye and camera

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Binocular or trinocular head on the same XSZ7045 body
• Auxiliary objectives from 0.3X to 2X to adjust working distance between 30mm and 165mm
• Eyepieces from WF15X through 30X to extend magnification to 3.5X-270X
• Alternative stands from the stereo microscope stand range
• Configuration-to-order assembly of head, stand, illumination and camera combinations

Comparison With Other Options

Use Guide

• Set the interpupillary distance between 55mm and 75mm before focusing, or the two channels will not merge
• Focus at the highest magnification first, then zoom out, so the image stays in focus across the range
• Keep the 100mm standard working distance in mind when positioning a soldering iron or probe
• Use optional auxiliary objectives to adjust working distance between 30mm and 165mm as needed
• Select optional eyepieces to extend magnification to 3.5X-270X without changing the stand