XSZ7045-STL6-B 7-45X Zoom Stereo Microscope

Key Benefits

• 100mm working distance provides clearance for soldering irons, hot air pencils and probes during rework
• 1:6.4 zoom ratio covers a 28.6mm field down to 4.4mm without swapping objectives
• Binocular or trinocular head allows simultaneous visual observation and camera capture
• Optional auxiliary objectives (0.3X to 2X) extend working distance from 30mm to 165mm
• Optional eyepieces (WF15X to 30X) extend magnification to 3.5X-270X for fine inspection tasks

Application Scenarios

• SMD rework at the bench with a soldering iron under the optics and image displayed on a monitor
• Incoming inspection of connectors, contacts and moulded parts against a drawing with a clear view of the full component
• Wire bond and solder joint documentation for a customer quality report using the same instrument
• Teaching a rework technique to a group from one screen instead of one eyepiece
• Watch, jewellery and micro-mechanical assembly where hands work under the optics with real-time visual feedback

Who It Is For

• Electronics repair and rework benches handling SMD and BGA work
• Quality departments that must attach photographs to inspection records
• Training rooms in electronics assembly plants
• Precision assembly workshops in watchmaking, jewellery and micro-mechanics

Problems It Solves

• A stereo head with no camera forces the operator to describe defects instead of showing them
• Short working distance instruments leave no room for a soldering iron under the optics
• Fixed magnification stands make an operator swap objectives between locating a fault and inspecting it
• Separate camera and microscope purchases often fail to match the tube diameter and eyepiece field
• A single stand that cannot scale from 7X to 270X requires multiple instruments and bench space

Technical Features

• Greenough optical system provides true stereo depth perception across the zoom range
• Interpupillary adjustment 55~75mm for operator-to-operator handover
• 1:6.4 zoom ratio enables smooth transition from locating a component to inspecting a joint
• 0.7X~4.5X magnification range under 1X objective with 100mm working distance
• Binocular or trinocular head configuration available on the same body
• Optional magnification extends to 7X-45X or 3.5X-270X with auxiliary objectives and eyepieces
• Field of view ranges from 28.6mm to 4.4mm at standard settings, and 1.1mm to 57.1mm with optional parts

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Binocular or trinocular head on the same XSZ7045 body
• Auxiliary objectives from 0.3X to 2X to move the working distance between 30mm and 165mm
• Eyepieces from WF15X through 30X to extend the magnification to 3.5X-270X
• Alternative stands from the stereo microscope stand range
• Configuration-to-order assembly of stand, head, illumination and camera combinations

Comparison With Other Options

Use Guide

• Set the interpupillary distance between 55mm and 75mm before focusing, or the two channels will not merge
• Focus at the highest magnification first, then zoom out, so the image stays in focus across the range
• Keep the 100mm standard working distance in mind when choosing a soldering iron and holder for the bench
• Use optional auxiliary objectives and eyepieces only when you need higher magnification or longer working distance
• Confirm compatibility of any additional components with the microscope body before ordering