XSZ7045-J2 7-45X Zoom Stereo Microscope

Key Benefits

• 100mm working distance allows space for soldering irons, tweezers or probes under the optics during rework
• 1:6.4 zoom ratio covers 28.6mm to 4.4mm field of view without changing objectives
• Binocular or trinocular head supports both operator viewing and camera integration
• Optional auxiliary objectives (0.3X to 2X) extend working distance from 30mm to 165mm
• Optional eyepieces (WF15X to 30X) extend magnification to 3.5X-270X for fine detail inspection
• Greenough optical system maintains true stereo depth perception across the zoom range

Application Scenarios

• SMD and BGA rework with hands working under the optics while monitoring the image on a screen
• Incoming inspection of small mechanical parts, connectors and moulded components
• Teaching or training in electronics assembly with a single image shared across multiple viewers
• Jewellery and watchmaking assembly where precision handwork is done under magnification
• Quality inspection in metallurgy or foundry labs where surface defects must be documented

Who It Is For

• Electronics manufacturers doing SMD and BGA rework and inspection
• Teaching laboratories in electronics and engineering schools
• Jewellery, watchmaking and precision assembly workshops
• Metallurgy and quality control labs in manufacturing
• Research labs requiring stereo depth for handling small samples

Problems It Solves

• Fixed magnification stands require swapping objectives when moving from locating a component to inspecting a joint
• Short working distance microscopes block access to tools like soldering irons or probes
• Separate camera and microscope setups often mismatch tube diameter or eyepiece field
• Lack of stereo depth in flat-screen digital microscopes reduces hand-eye coordination during manual tasks
• No option to extend magnification range without replacing the entire stand or head

Technical Features

• Greenough optical system provides true stereo view at all zoom levels
• Interpupillary adjustment 55~75mm for ergonomic handover between operators
• 1:6.4 zoom ratio with 0.7X to 4.5X magnification range under 1X objective
• 100mm working distance standard, extendable to 30~165mm with optional auxiliary objectives
• WF10X/F.N.20 eyepiece standard, with optional eyepieces from WF15X to 30X
• Field of view ranges from 28.6mm to 4.4mm at standard setting, up to 57.1mm with optional parts
• Binocular or trinocular head configuration available
• Optical system supports both visual observation and camera integration

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Choose between binocular and trinocular head on the same XSZ7045 body
• Add auxiliary objectives (0.3X to 2X) to adjust working distance between 30mm and 165mm
• Upgrade eyepieces to WF15X through 30X to extend magnification to 3.5X-270X
• Configure with optional field of view and magnification combinations for specific inspection tasks
• Order as a complete system or as a body-only unit for custom assembly

Comparison With Other Options

Use Guide

• Adjust interpupillary distance between 55mm and 75mm before focusing to ensure merged stereo image
• Focus at the highest magnification first, then zoom out to maintain focus across the zoom range
• Keep the 100mm standard working distance in mind when setting up tools and holders on the bench
• Use optional auxiliary objectives only when extended working distance is required
• Select optional eyepieces based on the desired magnification and field of view for the task