XSZ7045-B9L 7-45X Zoom Stereo Microscope

Key Benefits

• 100mm working distance allows tools like soldering irons, tweezers or probes to operate under the optics
• 1:6.4 zoom ratio covers a 28.6mm field down to 4.4mm without changing objectives
• Binocular or trinocular head supports simultaneous visual inspection and camera capture
• Optional eyepieces and auxiliary objectives extend magnification to 3.5X-270X for fine detail work
• Interpupillary adjustment 55~75mm ensures consistent viewing across different operators

Application Scenarios

• SMD rework at the bench with a soldering iron under the optics and image displayed on a monitor
• Incoming inspection of small mechanical parts, connectors or moulded components against a drawing
• Documentation of wire bonds, solder joints or micro-assemblies for quality reports
• Teaching precision assembly techniques in a lab or training room using a shared screen
• Jewellery or watchmaking assembly where hands work under the optics while viewing the image

Who It Is For

• Electronics repair and rework benches handling SMD and BGA components
• Quality departments requiring documented inspection records with visual evidence
• Teaching labs in electronics, engineering or precision mechanics
• Watchmaking, jewellery and micro-mechanical assembly workshops
• Research and development teams needing flexible magnification for prototype inspection

Problems It Solves

• Fixed magnification stands require objective changes to switch between locating and inspecting a defect
• Short working distance instruments block access to tools like soldering irons or hot air pencils
• Separate camera and microscope setups often mismatch tube diameter or eyepiece field
• Lack of interpupillary adjustment causes eye strain or double vision during operator handover
• No zoom range extension forces the purchase of multiple microscopes for different tasks

Technical Features

• Greenough optical system provides true stereo depth perception across the zoom range
• Binocular or trinocular head with 55~75mm interpupillary adjustment for operator comfort
• 1:6.4 zoom ratio delivers continuous magnification from 0.7X to 4.5X with a 1X objective
• 100mm working distance maintains clearance for tools under the optics
• Field of view changes from 28.6mm at low power to 4.4mm at high power without objective swap
• Optional eyepieces and auxiliary objectives allow magnification extension to 7X-45X or 3.5X-270X
• Standard eyepiece WF10X/F.N.20 provides a wide field of view at low magnification

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Choose binocular or trinocular head configuration on the same XSZ7045 body
• Add optional auxiliary objectives (0.3X to 2X) to adjust working distance between 30mm and 165mm
• Use optional eyepieces (WF15X to 30X) to extend magnification to 3.5X-270X
• Combine optional objectives and eyepieces to reach 7X-45X or 3.5X-270X
• Order the body with a specific head type and optional components as a configured unit

Comparison With Other Options

Use Guide

• Adjust the interpupillary distance between 55mm and 75mm before focusing to ensure a single merged image
• Focus at the highest magnification first, then zoom out to maintain focus across the full zoom range
• Keep the 100mm standard working distance in mind when positioning tools and holders on the bench
• Use optional auxiliary objectives to extend working distance to 30mm or 165mm as needed
• Combine optional eyepieces and objectives to reach the required magnification range for the task