XSZ7045-B2 7-45X Zoom Stereo Microscope

Key Benefits

• 100mm working distance allows a soldering iron, hot air pencil or probe to operate under the head without interference
• 1:6.4 zoom ratio covers a 28.6mm field down to 4.4mm without swapping objectives
• Binocular head provides stereo depth perception for hand-guided operations
• Optional eyepieces and objectives extend magnification to 3.5X-270X without changing the microscope body
• Interpupillary adjustment 55~75mm supports multiple users and easy handover between operators

Application Scenarios

• SMD rework at the bench with a soldering iron under the optics and stereo view for hand control
• Incoming inspection of connectors, contacts and moulded parts using a 1X objective and 100mm clearance
• Fine assembly of micro-mechanical parts where stereo depth is needed for precise placement
• Teaching a rework technique to a group using the same binocular view and a shared monitor
• Inspection of small components in jewellery, watchmaking or electronics where hands work under the optics

Who It Is For

• Electronics repair and rework benches handling SMD and BGA work
• Quality departments that need to document inspection results with a clear stereo view
• Training rooms in electronics assembly and precision engineering
• Jewellery, watchmaking and micro-mechanical assembly workshops
• Teaching laboratories requiring hands-on stereo observation for student use

Problems It Solves

• A fixed magnification stand forces the operator to swap objectives between locating a fault and inspecting it
• Short working distance instruments block the use of a soldering iron or probe under the optics
• Separate camera and microscope purchases often fail to match tube diameter and eyepiece field
• Lack of stereo depth in flat-screen digital microscopes makes hand-guided work difficult
• No option to extend magnification without replacing the entire stand or microscope body

Technical Features

• Greenough optical system provides true stereo depth perception across the entire zoom range
• Binocular head with interpupillary adjustment 55~75mm for operator-to-operator handover
• 1:6.4 zoom ratio allows continuous magnification from 0.7X to 4.5X without objective changes
• 1X objective with 100mm working distance supports hand tools under the optics
• WF10X/F.N.20 eyepiece standard, with optional eyepieces from WF15X to 30X for higher magnification
• Auxiliary objectives 0.3X, 0.5X, 0.7X, 0.75X, 1.5X, 2X extend working distance to 30~165mm
• Field of view ranges from 28.6mm to 4.4mm at 0.7X to 4.5X, and up to 57.1mm with optional parts

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Binocular head standard; trinocular head available on request
• Optional auxiliary objectives from 0.3X to 2X to adjust working distance between 30mm and 165mm
• Eyepieces from WF15X to 30X to extend magnification to 3.5X-270X
• Combination of optional parts allows full magnification range without changing the microscope body
• Stand configuration can be adjusted based on bench space and workflow needs

Comparison With Other Options

Use Guide

• Adjust the interpupillary distance between 55mm and 75mm before focusing to ensure a merged image
• Focus at the highest magnification first, then zoom out to maintain focus across the zoom range
• Keep the 100mm standard working distance in mind when positioning a soldering iron or tool holder
• Use optional auxiliary objectives to extend working distance to 30~165mm for deeper or larger workpieces
• Select optional eyepieces to reach 3.5X-270X magnification without replacing the microscope body