FL-20BW Mono Cooled SONY CMOS Camera for Fluorescence Imaging

Key Benefits

• 20 megapixel resolution at 5472 x 3648 captures high-detail fluorescence images in a single exposure
• Active cooling reduces dark current to 0.001e-/pixel/s, minimizing hot pixels during long exposures
• 2.4μm pixel size balances resolution and sensitivity for low-light fluorescence applications
• USB3.0 interface enables 8 frames per second at full resolution with low readout noise of 0.6e
• Supports up to four cameras simultaneously via SDK, enabling synchronized imaging in multi-channel setups

Application Scenarios

• Long exposure fluorescence imaging in biological or material science labs where dark current must be minimized
• Multi-camera imaging setups for time-lapse or spectral channel capture in confocal or epifluorescence microscopy
• High-resolution documentation of fluorescent samples in clinical or veterinary pathology
• Research applications requiring low readout noise and high dynamic range in low-light conditions
• Automated inspection lines using fluorescence to detect defects in semiconductor or micro-optical components

Who It Is For

• Research laboratories conducting fluorescence microscopy in biology, materials science, or medical diagnostics
• Clinical and veterinary pathology labs requiring high-resolution, low-noise image capture
• Semiconductor and micro-optics inspection teams using fluorescence to detect surface defects
• Academic institutions teaching advanced microscopy techniques with digital imaging
• Industrial quality control teams using fluorescence for non-destructive defect detection

Problems It Solves

• High dark current in uncooled CMOS cameras causes false signals during long exposures in fluorescence imaging
• Low-resolution cameras require multiple captures and stitching, increasing processing time and risk of misalignment
• Lack of multi-camera support limits synchronized imaging across multiple channels or microscopes
• Separate power supplies and data cables increase setup complexity and cabling clutter
• Inadequate cooling leads to thermal noise that degrades image quality in extended imaging sessions

Technical Features

• Sony IMX183CLK-J CMOS sensor with 15.86mm diagonal and 20MP resolution at 5472 x 3648
• Active cooling system reduces dark current to 0.001e-/pixel/s
• 2.4μm x 2.4μm pixel size with 16ke- full-well capacity for high dynamic range
• 8 frames per second at full resolution over USB3.0 interface
• Rolling shutter mode with exposure time from 16μs to 60 minutes
• Supports binning modes: 2x2, 3x3, 4x4, 8x8 for faster frame rates or lower noise
• 16-bit or 8-bit bit depth output for high dynamic range or file size control
• Standard C-mount optical interface for compatibility with microscope objectives
• SDK supports up to four cameras simultaneously for synchronized capture

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Available with or without cooling module depending on application needs
• Supports custom firmware configuration via SDK for integration into automated systems
• Can be paired with optional C-mount adapters for non-standard objective flanges
• Configurable bit depth and output format via software for specific data handling workflows

Comparison With Other Options

Use Guide

• Ensure the microscope's optical path is aligned to the C-mount before mounting the camera
• Use a 12V power supply with stable output to maintain consistent cooling performance
• Set the exposure time to 16μs for fast events or up to 60 minutes for low-light fluorescence capture
• Enable binning (2x2 or higher) to increase frame rate or reduce noise in low-signal conditions
• Use the Mosaic V2 software to stitch multiple images or manage multi-camera synchronization