Home
Products
Diamond Segments for Stone
Segments for 900-3500mm Blades

Diamond Segments for Stone

Segments for 900-3500mm Blades

Name: Segments for 900-3500mm Blades
Brand: Bello Diamond Tools
SKU: SA900DS

Re-tipping segments for 900-3500 mm block blades

Large block blades are worth re-tipping many times over, provided the segment matches the stone and the saw. Item IDs SA900DS-SA3500DS cover granite sandstone and other block work.

Request A Quote Talk To An Engineer

Stone Processing
SA900DS to SA3500DS
17 sizes listed

Segments for 900-3500mm Blades — Re-tipping segments for 900-3500 mm block blades

Product Overview

What Segments for 900-3500mm Blades Is For

The plant specification sheet describes this tool as used for fast and smooth block butting granite, sandstone and other stones. That is exactly where it belongs, and where it stops.

The specification table lists 17 sizes, Item IDs SA900DS to SA3500DS.

Inside Diamond Segments for Stone there are 4 items to choose between. This one is the re-tipping segments for 900-3500 mm block blades option — the comparison further down this page sets it against the others.

Technical Features

How It Is Built

Manufacturing route

Hot press sintered. This is what holds the diamond in place under working load.

Bond selected per enquiry

We do not ship a single general-purpose bond. Please inform your stone information, we will choose the best bonding for you.

Item ID series

Ordering runs on the SA900DS to SA3500DS series, so repeat orders return the same specification.

Sizes beyond the standard list

Other sizes are available upon customer's request.

Export handling

Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.

Specifications

Sizes and Item IDs

Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.

Segments for 900-3500mm Blades — Specification table
Item ID	Diameter	Segment Size	Segment No.
mm	Length	Width (Taper Type)	Height	pcs /set
SA900DS	900	24	7.0/6.5	10/12/15/20	64
SA1000DS	1000	24	7.0/6.5	10/12/15/20	70
SA1100DS	1100	24	7.4/6.8	12/15/20	74
SA1200DS	1200	24	7.5/7.0	12/15/20	80
SA1300DS	1300	24	8.0/7.5	12/15/20	88
SA1350DS	1350	24	8.4/7.7	12/15/20	88
SA1400DS	1400	24	8.5/8.0	12/15/20	96
SA1600DS	1600	24	9.0/8.7/8.4	12/15/20	104/108
SA1700DS	1700	24	9.4/8.9/8.4	12/15/20	112
SA1800DS	1800	24	9.5/9.0	12/15/20	120
SA2000DS	2000	24	10.5/9.5	12/15/20	128
SA2200DS	2200	24	11.5/10.5	12/15/20	132/136
SA2500DS	2500	24/30	12/11.5/11	15/20/25/30	140
SA2700DS	2700	24/30	12/11.5/11	15/20/25/30	140
SA3000DS	3000	24/30	12.5/12/11.5	15/20/25/30	160
SA3500DS	3500	24/30	13/12.5/12	15/20/25/30	180

Product family: Stone Processing
Category: Diamond Segments for Stone
Manufacturing route: Hot press sintered.
Bond: Please inform your stone information, we will choose the best bonding for you.
Country of manufacture: China (Shangqiu, Henan)
Private label: Laser marking on the steel core available for OEM orders

Who It Is For

Stone plants re-tipping their own blades
Blade service shops
Blade manufacturers buying segments

Every one of these buyers gets the same first question from us: what material, what machine, what size.

The Problem It Solves

Replacing a whole blade when only the segments are worn wastes the steel core.

Segments for 900-3500mm Blades is the answer to that in the diamond segments for stone part of the range: re-tipping segments for 900-3500 mm block blades.

Used for fast and smooth block butting granite, sandstone and other stones.

Key Benefits

Why This Version and Not Another

Segment programmes for gang saws multi saws and 200-3500 mm blades

Applies across the diamond segments for stone series, including this item.

Hot-press sintered for consistent diamond distribution

Part of how this category is built.

Segment height and concentration set for your stone

Part of how this category is built.

Use Guide

Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.

Compared With the Rest of the Category

Diamond Segments for Stone holds 4 items in the programme. The difference between them is geometry and construction, not marketing.

Diamond Gang Saw Segments — gang saw segments for marble block sawing
Diamond Multi-saw Segments — multi-saw segments for granite block and slab work
Segments for 200-800mm Blades — re-tipping segments for 200-800 mm blades
Arrow Segment Diamond Grinding Cup Wheel for Stone — arrow segments for fast stock removal on stone
Continuous Rim Diamond Grinding Cup Wheel for Stone — continuous rim for the smoothest ground surface
Continuous Rim Diamond Grinding Cup Wheel with Slot — slotted continuous rim balancing finish and cooling

See the whole diamond segments for stone category

Questions Buyers Ask

Segments for 900-3500mm Blades — Questions We Get Asked

What sizes does Segments for 900-3500mm Blades come in

The standard programme lists 17 sizes on this page, Item IDs SA900DS to SA3500DS. Other sizes are available upon customer's request.

Which bond will you supply for my material

The bond is set per enquiry rather than per catalogue number. Please inform your stone information, we will choose the best bonding for you.

What do you need to quote Segments for 900-3500mm Blades

The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.

What is the lead time and minimum order for Segments for 900-3500mm Blades

Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)