Home
Products
Diamond Segments for Stone
Segments for 200-800mm Blades

Diamond Segments for Stone

Segments for 200-800mm Blades

Name: Segments for 200-800mm Blades
Brand: Bello Diamond Tools
SKU: SA250DS

Re-tipping segments for 200-800 mm blades

A worn edge cutting blade still has a perfectly good steel core, and re-tipping it costs a fraction of a new blade. Item IDs SA250DS-SA800DS cover the edge cutting range.

Request A Quote Talk To An Engineer

Stone Processing
SA250DS to SA800DS
12 sizes listed

Segments for 200-800mm Blades — Re-tipping segments for 200-800 mm blades

Product Overview

What Segments for 200-800mm Blades Is For

The plant specification sheet describes this tool as used for diamond edge cutting blade to fast and smoothly cut stones. That is exactly where it belongs, and where it stops.

The specification table lists 12 sizes, Item IDs SA250DS to SA800DS.

Inside Diamond Segments for Stone there are 4 items to choose between. This one is the re-tipping segments for 200-800 mm blades option — the comparison further down this page sets it against the others.

Technical Features

How It Is Built

Manufacturing route

Hot press sintered. This is what holds the diamond in place under working load.

Bond selected per enquiry

We do not ship a single general-purpose bond. Please inform your stone information, we will choose the best bonding for you.

Item ID series

Ordering runs on the SA250DS to SA800DS series, so repeat orders return the same specification.

Sizes beyond the standard list

Other sizes are available upon customer's request.

Export handling

Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.

Specifications

Sizes and Item IDs

Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.

Segments for 200-800mm Blades — Specification table
ID Item	Diameter	Segment Size (mm)	Segment No.
mm	Inch	Length	Width	Height	( pcs /set)
SA250DS	250	10"	40	2.6/2.8	10/12	18
SA300DS	300	12"	40	3.0/3.2	10/12	21
SA350DS	350	14"	20/40	3.2/3.4	10/12/15	24
SA400DS	400	16"	20/40	3.4/3.6/3.8	10/12/15	28
SA450DS	450	18"	40	3.6/3.8/4.0	10/12/15	32
SA500DS	500	20"	20/40	4.2	10/12/15	36
SA550DS	550	22"	40	4.2/4.4	10/12/15	38
SA600DS	600	24"	20/40	4.2/4.6	10/12/15	42
SA700DS	700	28"	40	5.0	10/12/15	50
SA750DS	750	30"	40	5.5	10/12/15	50
SA800DS	800	32"	20/40	5.2	10/12/15	46

Product family: Stone Processing
Category: Diamond Segments for Stone
Manufacturing route: Hot press sintered.
Bond: Please inform your stone information, we will choose the best bonding for you.
Country of manufacture: China (Shangqiu, Henan)
Private label: Laser marking on the steel core available for OEM orders

Who It Is For

Stone plants re-tipping their own blades
Blade service shops
Blade manufacturers buying segments

Every one of these buyers gets the same first question from us: what material, what machine, what size.

The Problem It Solves

Replacing a whole blade when only the segments are worn wastes the steel core.

Segments for 200-800mm Blades is the answer to that in the diamond segments for stone part of the range: re-tipping segments for 200-800 mm blades.

Used for diamond edge cutting blade to fast and smoothly cut stones.

Key Benefits

Why This Version and Not Another

Segment programmes for gang saws multi saws and 200-3500 mm blades

Applies across the diamond segments for stone series, including this item.

Hot-press sintered for consistent diamond distribution

Part of how this category is built.

Segment height and concentration set for your stone

Part of how this category is built.

Use Guide

Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.

Compared With the Rest of the Category

Diamond Segments for Stone holds 4 items in the programme. The difference between them is geometry and construction, not marketing.

Diamond Gang Saw Segments — gang saw segments for marble block sawing
Diamond Multi-saw Segments — multi-saw segments for granite block and slab work
Segments for 900-3500mm Blades — re-tipping segments for 900-3500 mm block blades
Arrow Segment Diamond Grinding Cup Wheel for Stone — arrow segments for fast stock removal on stone
Continuous Rim Diamond Grinding Cup Wheel for Stone — continuous rim for the smoothest ground surface
Continuous Rim Diamond Grinding Cup Wheel with Slot — slotted continuous rim balancing finish and cooling

See the whole diamond segments for stone category

Questions Buyers Ask

Segments for 200-800mm Blades — Questions We Get Asked

What sizes does Segments for 200-800mm Blades come in

The standard programme lists 12 sizes on this page, Item IDs SA250DS to SA800DS. Other sizes are available upon customer's request.

Which bond will you supply for my material

The bond is set per enquiry rather than per catalogue number. Please inform your stone information, we will choose the best bonding for you.

What do you need to quote Segments for 200-800mm Blades

The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.

What is the lead time and minimum order for Segments for 200-800mm Blades

Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)