- Home
- Products
- Diamond Segments for Stone
- Diamond Gang Saw Segments
Diamond Gang Saw Segments
Gang saw segments for marble block sawing
A gang saw consumes segments rather than blades, so buying the segment is the whole point. Item IDs SA20GSS and SA24GSS are hot-press sintered for consistent diamond distribution across the set.
What Diamond Gang Saw Segments Is For
The plant specification sheet describes this tool as used for gang saw to cut marble. That is exactly where it belongs, and where it stops.
The specification table lists 3 sizes, Item IDs SA20GSS to SA24GSS.
Inside Diamond Segments for Stone there are 4 items to choose between. This one is the gang saw segments for marble block sawing option — the comparison further down this page sets it against the others.
How It Is Built
Manufacturing route
Hot press sintered. This is what holds the diamond in place under working load.
Bond selected per enquiry
We do not ship a single general-purpose bond. Please inform your stone information, we will choose the best bonding for you.
Item ID series
Ordering runs on the SA20GSS to SA24GSS series, so repeat orders return the same specification.
Sizes beyond the standard list
Other sizes are available upon customer's request.
Export handling
Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.
Sizes and Item IDs
Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.
| Item ID | Segment size(mm) | ||
|---|---|---|---|
| Length | Width | Height | |
| SA20GSS | 20 | 3.5/4.0/4.5/5.0 | 10/12 |
| SA24GSS | 24 | 4.0/4.5/5.0 | 10/12 |
- Product family
- Stone Processing
- Category
- Diamond Segments for Stone
- Manufacturing route
- Hot press sintered.
- Bond
- Please inform your stone information, we will choose the best bonding for you.
- Country of manufacture
- China (Shangqiu, Henan)
- Private label
- Laser marking on the steel core available for OEM orders
Who It Is For
- Stone plants re-tipping their own blades
- Blade service shops
- Blade manufacturers buying segments
Every one of these buyers gets the same first question from us: what material, what machine, what size.
The Problem It Solves
Replacing a whole blade when only the segments are worn wastes the steel core.
Diamond Gang Saw Segments is the answer to that in the diamond segments for stone part of the range: gang saw segments for marble block sawing.
Used for gang saw to cut marble.
Why This Version and Not Another
Segment programmes for gang saws multi saws and 200-3500 mm blades
Applies across the diamond segments for stone series, including this item.
Hot-press sintered for consistent diamond distribution
Part of how this category is built.
Segment height and concentration set for your stone
Part of how this category is built.
Use Guide
Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.
Compared With the Rest of the Category
Diamond Segments for Stone holds 4 items in the programme. The difference between them is geometry and construction, not marketing.
- Diamond Multi-saw Segments — multi-saw segments for granite block and slab work
- Segments for 200-800mm Blades — re-tipping segments for 200-800 mm blades
- Segments for 900-3500mm Blades — re-tipping segments for 900-3500 mm block blades
- Arrow Segment Diamond Grinding Cup Wheel for Stone — arrow segments for fast stock removal on stone
- Continuous Rim Diamond Grinding Cup Wheel for Stone — continuous rim for the smoothest ground surface
- Continuous Rim Diamond Grinding Cup Wheel with Slot — slotted continuous rim balancing finish and cooling
Diamond Gang Saw Segments — Questions We Get Asked
What sizes does Diamond Gang Saw Segments come in
The standard programme lists 3 sizes on this page, Item IDs SA20GSS to SA24GSS. Other sizes are available upon customer's request.
Which bond will you supply for my material
The bond is set per enquiry rather than per catalogue number. Please inform your stone information, we will choose the best bonding for you.
What do you need to quote Diamond Gang Saw Segments
The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.
What is the lead time and minimum order for Diamond Gang Saw Segments
Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)
Others in the Same Part of the Range
Diamond Multi-saw Segments
Multi-saw segments for granite block and slab work
View specifications →
Segments for 200-800mm Blades
Re-tipping segments for 200-800 mm blades
View specifications →
Segments for 900-3500mm Blades
Re-tipping segments for 900-3500 mm block blades
View specifications →
Arrow Segment Diamond Grinding Cup Wheel for Stone
Arrow segments for fast stock removal on stone
View specifications →
Continuous Rim Diamond Grinding Cup Wheel for Stone
Continuous rim for the smoothest ground surface
View specifications →
Continuous Rim Diamond Grinding Cup Wheel with Slot
Slotted continuous rim balancing finish and cooling
View specifications →
Double Row Diamond Grinding Cup Wheel for Stone
Double row cup wheel for heavier stock removal
View specifications →
Flower Turbo Diamond Grinding Cup Wheel for Stone
Flower turbo geometry for aggressive stone grinding
View specifications →Related Technical Guides
Get a quote for Diamond Gang Saw Segments
Send the material, machine and size. You will get a specification and a price, not a catalogue page.