Stainless Steel Sanitary Clamped Concentric Reducer
The Sanitary Clamped Concentric Reducer is engineered with premium 304/316L stainless steel for superior corrosion resistance and durability in hygienic applications.
Why Engineers Specify This Item
- Manufactured to AS, BS, 3A, SMS, and DIN standards, this reducer complies with FDA, 3A, and CE certifications, guaranteeing safety for sensitive industries.
- Ideal for pharmaceutical and food processing systems, it maintains smooth flow transition while meeting strict sanitary requirements.
- Its tri-clamp connection design ensures quick installation and disassembly, minimizing downtime during maintenance.
- The precision-polished interior surface (Ra≤0.8μm) prevents bacterial buildup, making it a reliable choice for high-purity fluid handling.
What It Prevents
- Concentric reducers on a horizontal line that trap liquid at the step
- Size changes made with an adapter stack instead of a single fitting
- Pump suction reducers that let air collect and cause cavitation
Technical Data
Figures below are the catalogue range for this item. Exact dimensions are confirmed in writing against the standard you work to before production.
| Material | SS 304 or SS 316L for option |
|---|---|
| Media | Water, oil, milk, beverage, sanitary fluid etc |
| Connection | Butt-Welded, Thread, Clamped, Flange |
| Size Range | 1"-6" |
| Pressure | 0-20Bar |
| Working Temperature | -20 C to 120 C |
| Standard | AS, BS, 3A, DIN, SMS, ISO |
| Gasket | EPDM/SILICON/PTFE/VITON |
| Certification | 3A, FDA, CE |
Materials
- SS 304
- SS 316L
Manufacturing Process
- Machining
- Forming and welding
- Interior polishing
- Assembly
- Quality inspection
Quality Control
- Dimensional check against the standard stated on the order
- Surface finish verified against the specified Ra figure
- Visual and leak inspection before packing
- Material certificates to EN 10204 3.1 available on request
Where It Is Installed
- Pump suction where the flat side must sit on top to clear air
- Stepping a 3 inch header down to a 2 inch filler feed
- Adapting a vessel outlet to the plant standard tube size
- Matching a filter housing port to the line
Who Buys It
- Engineers connecting a pump suction to a larger supply line
- Fabricators matching equipment ports to the plant line size
- Plants standardising on one tube size through a rebuild
What It Is Built To
- 3A
- FDA
- CE
What We Can Change
- Non-standard sizes made to your dimensions
- Special connection types and mixed-standard ends
- Customised surface finish down to Ra 0.4 um
- Seal material selected for your media and CIP cycle
How It Compares
Compared with Sanitary Tees
Specify the Stainless Steel Sanitary Clamped Concentric Reducer where the duty is what this category is built for: concentric and eccentric reducers that change line size without creating a pocket the line cannot drain. Move to sanitary tees instead where the requirement is branch fittings in clamped, welded and union versions, including short outlet, Y-type, U-type and instrument tees.
Compared with Sanitary Elbows and Bends
Specify the Stainless Steel Sanitary Clamped Concentric Reducer where the duty is what this category is built for: concentric and eccentric reducers that change line size without creating a pocket the line cannot drain. Move to sanitary elbows and bends instead where the requirement is 45, 90 and 180 degree bends in clamped, welded and threaded versions, including long radius bends for pumped product.
Compared with A general industrial equivalent
An industrial-grade part of the same nominal size is usually cheaper and carries no declared hygienic surface finish, no crevice-free joint geometry and no material certificate. On a product contact line that difference shows up at the first swab test, not on the purchase order.
Installing and Living With It
Bring the two ferrule faces square before closing the clamp. Fit the gasket dry and seated in the groove, then tighten the clamp evenly; overtightening extrudes the gasket into the bore.
Purge the bore with inert gas before welding and keep heat input low so the heat affected zone does not discolour. Polish the internal weld to the finish specified for the rest of the line.
Do not use tape or sealant on a hygienic union thread. The seal is made by the gasket at the liner seat, not by the thread, so check the gasket is seated before tightening the nut.
Align the flange faces parallel before drawing the bolts up, and tighten opposite pairs in stages so the gasket is loaded evenly across the face.
Keep the duty inside the stated working temperature range of -20 C to 120 C. Running a CIP cycle hotter than the seal material allows is the most common cause of early failure on this item.
Do not exceed the 0-20Bar working pressure. Where the line sees pressure pulsation, specify a heavy duty or bolted clamp at the joints either side.
Record the standard, size, material and seal material fitted, so the replacement ordered in two years matches what is installed today.
Others in the Reducers Range
Guides That Cover This Item
Sanitary Fitting Standards Compared AS1528 BS4825 DIN SMS and RJT
Six standards, one job. Here is what actually differs between them and how to tell which one your plant already uses before you or...
CIP Design Checklist for Hygienic Pipework
Most cleaning failures are layout problems, not chemistry problems. Work through this before the line is welded, because afterward...
Industries This Item Serves
Related Capability
Stainless Steel Sanitary Clamped Concentric Reducer FAQ
What we are asked before this item is ordered.
What sizes is the Stainless Steel Sanitary Clamped Concentric Reducer available in
The catalogue range is 1"-6". Dimensions follow the AS, BS, 3A, DIN, SMS, ISO standards. Confirm the tube outside diameter and wall thickness you work to when you enquire and we will match the exact dimensions before production.
Which material should I specify for the Stainless Steel Sanitary Clamped Concentric Reducer
Material options are SS 304 or SS 316L. Choose 316L where chlorides are present or where the item will be welded into a line that has to be validated; 304 is adequate for neutral product and standard caustic CIP. Material certificates to EN 10204 3.1 are available on request.
Which seal material suits my cleaning cycle
The Stainless Steel Sanitary Clamped Concentric Reducer is supplied with EPDM/SILICON/PTFE/VITON sealing options. EPDM is the default for hot water and caustic CIP, silicone for high temperature steam contact, PTFE for aggressive chemicals and Viton for oils and fats. Tell us the media and the peak CIP temperature and we will specify it on the order.
What is the lead time and minimum order for this item
Standard catalogue items such as the Stainless Steel Sanitary Clamped Concentric Reducer are typically 7-15 days, and small quantity orders of standard items are accepted. Custom sizes, special connections and bulk quantities are quoted with a confirmed date before production starts.
Quote the Stainless Steel Sanitary Clamped Concentric Reducer
Send the size, media, working pressure, temperature and the standard you work to. We confirm dimensions, material and finish in writing before quoting.