Honeycomb Firing Trays and Pins
Round, square and multistation honeycomb firing trays with metal, ceramic and Amann Girrbach pins.
Everything Catalogued in Honeycomb Firing Trays and Pins
Firing Tray, Round, 80mm, Ceramic PinsFiring WoolFiring Tray, 80mm, Metal PinsFiring Tray, 72mm, Metal PinsFiring Tray, 80mm, Amann Girrbach Pins
Firing Tray, 72mm, Amann Girrbach Pins
Firing Tray, Square, 65mm, Ceramic Pins
Firing Tray, Square, 55mm, Ceramic Pins
Firing Tray, Multistation
Firing Tray, Vita Type
Metal Pin
Ceramic Pin
Amann Girrbach Pin
Pink Peg 1#
Pink Peg 2#
Pink Peg 3#
Pink Peg 4#
Pink Peg 5#
Pink Peg 6#
Pink Peg 7#
Pink Peg 8#What This Category Fixes at the Bench
In the furnace, a unit is only as stable as the pin holding it. A crown that shifts during the firing cycle touches its neighbour or slumps against the tray, and the firing is lost along with the time.
Problems it removes
- Units placed directly on a tray heat unevenly where they touch it.
- Pins that do not match the honeycomb pitch will not sit square.
- Trays sized for one furnace do not fit the chamber of another.
Who buys it
- Ceramists firing porcelain and pressable ceramics
- Laboratories running more than one furnace
- Labs on Amann Girrbach and VITA systems
Where This Range Is Strong
- Round 72 mm and 80 mm, square 55 mm and 65 mm, plus multistation and VITA-type formats.
- Trays supplied with ceramic, metal or Amann Girrbach pins, and the pins sold separately as refills.
- Firing wool available alongside the trays for support during the cycle.
Also in Ceramic Plates and Trays
Used in these workflows
Bought by
Typical Situations at the Bench
Firing single crowns supported clear of the tray surface
Running a full case of units in one cycle on a multistation tray
Replacing pins that have distorted after repeated firings
Guides Related to This Category
Honeycomb Firing Trays and Pins: Buyer Questions
Which tray size fits my furnace?
Measure the internal diameter of the firing chamber and choose a tray that leaves clearance all round. The catalogue lists round 72 mm and 80 mm and square 55 mm and 65 mm formats; tell us your furnace model and we will confirm before shipping.
What is the difference between ceramic and metal pins?
Ceramic pins carry less heat into the restoration and do not oxidise, which matters for repeated high-temperature cycles. Metal pins are more robust against handling. Both are stocked as refills.
Do the trays come with pins included?
Several are catalogued as a set with a stated pin count, for example round 80 mm with ceramic pins or 72 mm with 10 pieces of Amann Girrbach pins. Pins are also sold separately.
Get a Price on Honeycomb Firing Trays and Pins
Send the items and quantities you need from this category. We will quote them with the rest of your order so it ships once.