EHWHA Pin Plate Holder
Pin plate holder for EHWHA stenter rails. The holder is the part that carries the pin plate and rides on the chain, so it takes the fabric tension the pins collect. When a holder wears or cracks, the plate above it stops sitting square and the selvedge grip goes uneven long before the pins are worn out.
Key Benefits
- Carries the pin plate square to the rail so pin grip stays even
- Metal construction sized for the EHWHA chain pitch
- Replaces holders that have cracked or worn at the chain mounting
- Supplied in matched quantities for a rail section or a full rail
Application Scenarios
- EHWHA rails where the holders have worn before the plates
- Chain overhauls where holders are replaced with the chain
- Mills recommissioning a used EHWHA stenter
Who It Is For
- Finishing mills running EHWHA stenters
- Maintenance teams replacing holders as part of a chain overhaul
- Machinery dealers supporting EHWHA machines in the field
Problems It Solves
- A worn holder letting the pin plate tilt, so one pin row grips harder than the other.
- Cracked holders at the chain mounting causing plates to come loose in the chamber.
- New pin plates being fitted to worn holders and wearing out early.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Application: Monforts stenter (Oil-free guide)
- Material: metal
- Type: with grease and without grease
- Colour: silver
- Weight: 0.6kg
- Brand: YH
Specifications
| Application | Monforts stenter (Oil-free guide) |
|---|---|
| Material | metal |
| Type | with grease and without grease |
| Colour | silver |
| Weight | 0.6kg |
| Brand | YH |
| Origin | Zhejiang, China |
| Delivery Time | Within 7 days |
Quality Control
- Dimensions gauged against the reference part on every production batch
- Fit checked on a rail or chain section before packing
- Material certificate held for the stock used
- Parts packed in matched sets from one batch so wear is even along the rail
Customisation Options
- Holders matched from your EHWHA sample
- Quantities matched to your rail length
- Supplied together with matching pin plates
How It Compares
| Compared With | What Changes |
|---|---|
| Replacing pin plates only | New plates on worn holders will not sit square. If the holder has play at the chain mounting, replace both together. |
| LK pin plate holder | Different brand and chain pitch. We list LK holders separately. |
Fitting and Replacing This Part
Step 1
Stop the machine and let the assembly cool before stripping it
Step 2
Note how the old part sits before removing it
Step 3
Clean the seat completely before fitting the new part
Step 4
Turn the rail by hand for one full pass and check free movement
Step 5
Replace in complete sets so grip and wear stay even across the machine
Related Solutions
- Custom Part Manufacturing From Samples — Pin plates, pin plate holders, clips, brush wheels and other metal parts made to customer requirement, from a sample or a drawing.
- Complete Stenter Rail Rebuild — Chain, pin plates, holders, clips, sliders and graphite strip quoted and shipped as one matched package.
Industries Using This Part
Guides That Mention This Part
How to Choose a Stenter Spare Parts Factory
What to ask a supplier before the first order, from material specification to how they pack a rail set, and which answers should make you walk away.
Read Guide
Why Fabric Leaves the Stenter Narrower Than It Should
Width loss is almost always a grip problem, not a setting problem. Work through the rail in order: brush, pins or clips, holders, chain, guide.
Read Guide
How to Choose and Order a Stenter Pin Plate
Order on hole centres and plate length, not on the machine brand. What to measure, which material to specify and why plates should be replaced in matched sets.
Read GuideEHWHA Pin Plate Holder Questions
How do I know if the holder needs replacing and not just the plate?
Grip the fitted plate and try to rock it. Any play at the holder mounting means the holder is worn.
Do you supply EHWHA pin plates to match?
Ask us with a sample or a photo. We quote plate and holder together so the assembly is matched.
Can you make a holder from a sample?
Yes. Post us one holder and we will match the chain mounting and plate seat.
Do you also make the EHWHA brush wheel?
Yes, we carry a brush wheel for EHWHA machines. See the brush wheel category.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.