Stenter Pin Plate for Krantz 4 x 12 x 77 mm
Pin plate for Krantz stenter rails, 4 x 12 x 77 mm with hole to hole 57 mm and 3 mm screws. Krantz rails use a shorter plate and a tighter hole pattern than Monforts, so a Monforts plate will not seat. This is the plate that drops straight into a Krantz holder.
Key Benefits
- Krantz hole pattern at 57 mm centres with 3 mm screws, no drilling on site
- 77 mm plate body sized for the Krantz rail pitch
- Copper plate with carbon steel or stainless steel pins
- Held as a standard line, so repeat orders ship in 7 days
Application Scenarios
- Krantz pin rails being rebuilt after chain replacement
- Mills running mixed Krantz and Monforts lines that need both plate patterns on the shelf
- Heat setting and drying runs where selvedge grip has gone soft
Who It Is For
- Textile finishing mills running Krantz pin stenters
- Maintenance teams rebuilding a pin rail after a chain overhaul
- Machinery dealers and service companies holding spare part stock for customers
- Mills running a mixed machine park who need plate patterns kept apart on the parts list
Problems It Solves
- Worn or bent pins let the selvedge slip, so the fabric loses width and the edge frays.
- Monforts plates being ordered by mistake for a Krantz rail, where the hole centres do not line up.
- OEM plates can take weeks to arrive and the stenter stands still while you wait.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Application: stenter
- Size: 4*12*77,hole to hole 57mm ,scrow 3mm
- Material: plate:copper / pin: corban steel or stainless steel
- Colour: silver and yellow
- Brand: YH
- Origin: Zhejiang, China
Specifications
| Application | stenter |
|---|---|
| Size | 4*12*77,hole to hole 57mm ,scrow 3mm |
| Material | plate:copper / pin: corban steel or stainless steel |
| Colour | silver and yellow |
| Brand | YH |
| Origin | Zhejiang, China |
Quality Control
- Dimensions gauged against the reference part on every production batch
- Fit checked on a rail or chain section before packing
- Material certificate held for the stock used
- Parts packed in matched sets from one batch so wear is even along the rail
Customisation Options
- Plates matched from a Krantz sample plate
- Stainless steel pins for aggressive finishing chemistry
- Matched full-rail sets so pin height is even
How It Compares
| Compared With | What Changes |
|---|---|
| Monforts pin plates | Krantz plates are shorter at 77 mm with 57 mm hole centres and 3 mm screws. The two are not interchangeable. |
| OEM Krantz plates | Same fitment and the same copper and steel construction, quoted from stock in Shaoxing. |
Fitting and Replacing This Part
Step 1
Stop the machine and let the assembly cool before stripping it
Step 2
Note how the old part sits before removing it
Step 3
Clean the seat completely before fitting the new part
Step 4
Turn the rail by hand for one full pass and check free movement
Step 5
Replace in complete sets so grip and wear stay even across the machine
Related Solutions
- Custom Part Manufacturing From Samples — Pin plates, pin plate holders, clips, brush wheels and other metal parts made to customer requirement, from a sample or a drawing.
- Complete Stenter Rail Rebuild — Chain, pin plates, holders, clips, sliders and graphite strip quoted and shipped as one matched package.
Industries Using This Part
Guides That Mention This Part
Stenter Pin Plate and Brush Wheel Size Reference
A working reference of the plate dimensions, hole centres and brush wheel sizes we hold, with the measurements to take before you order.
Read GuideHow to Choose and Order a Stenter Pin Plate
Order on hole centres and plate length, not on the machine brand. What to measure, which material to specify and why plates should be replaced in matched sets.
Read GuideStenter Pin Plate for Krantz 4 x 12 x 77 mm Questions
What size is the Krantz pin plate?
4 x 12 x 77 mm, hole to hole 57 mm, 3 mm screws.
Can I fit a Monforts plate on a Krantz rail?
No. The hole centres are different, 57 mm on Krantz against 76 mm on the common Monforts pattern. The plate will not seat square.
Do you also supply the Krantz pin plate holder?
Ask us with your machine details. We make holders for several brands and can quote against a sample.
How many plates are in a full rail?
It depends on the machine length. Send us the rail length and plate pitch and we will calculate the count for both sides.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.