Bruckner Stenter Pin Plate Type 2
The second Bruckner plate pattern we hold. Same copper plate and carbon or stainless steel pin build, a different hole layout. Bruckner rails changed over the years, so the safe way to order is to measure the plate you are removing rather than to order on the machine name alone.
Key Benefits
- Covers the Bruckner rails the type 1 plate does not fit
- Copper plate body with carbon steel or stainless steel pins
- Pin geometry identical to type 1, only the mounting differs
- Confirmed against your sample before production starts
Application Scenarios
- Older Bruckner rails with a different hole spacing
- Mills running two Bruckner generations
- Used machine recommissioning where no parts list came with the machine
Who It Is For
- Textile finishing mills running Bruckner pin stenters
- Maintenance teams rebuilding a pin rail after a chain overhaul
- Machinery dealers and service companies holding spare part stock for customers
- Buyers of used Bruckner stenters with no original documentation
Problems It Solves
- Ordering Bruckner plates on the brand name and finding the fixing holes are wrong.
- Worn or bent pins let the selvedge slip, so the fabric loses width and the edge frays.
- Plates bought in small lots from different batches give uneven pin height along the rail.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Application: Monforts stenter
- Material: plate:copper / pin: corban steel or stainless steel
- Colour: silver and yellow
- Brand: XTY
- Origin: Zhejiang, China
Specifications
| Application | Monforts stenter |
|---|---|
| Material | plate:copper / pin: corban steel or stainless steel |
| Colour | silver and yellow |
| Brand | XTY |
| Origin | Zhejiang, China |
Quality Control
- Dimensions gauged against the reference part on every production batch
- Fit checked on a rail or chain section before packing
- Material certificate held for the stock used
- Parts packed in matched sets from one batch so wear is even along the rail
Customisation Options
- Matched from your Bruckner sample plate
- Stainless steel pins for aggressive chemistry
- Matched full-rail sets
How It Compares
| Compared With | What Changes |
|---|---|
| Bruckner pin plate type 1 | Different hole spacing and plate length. Measure hole to hole before you order either one. |
| Artos pin plates | Different brand and a different holder, although the pin geometry is the same family. |
Fitting and Replacing This Part
Step 1
Stop the machine and let the assembly cool before stripping it
Step 2
Note how the old part sits before removing it
Step 3
Clean the seat completely before fitting the new part
Step 4
Turn the rail by hand for one full pass and check free movement
Step 5
Replace in complete sets so grip and wear stay even across the machine
Related Solutions
- Custom Part Manufacturing From Samples — Pin plates, pin plate holders, clips, brush wheels and other metal parts made to customer requirement, from a sample or a drawing.
- Complete Stenter Rail Rebuild — Chain, pin plates, holders, clips, sliders and graphite strip quoted and shipped as one matched package.
Industries Using This Part
Guides That Mention This Part
How to Choose a Stenter Spare Parts Factory
What to ask a supplier before the first order, from material specification to how they pack a rail set, and which answers should make you walk away.
Read Guide
Stenter Pin Plate and Brush Wheel Size Reference
A working reference of the plate dimensions, hole centres and brush wheel sizes we hold, with the measurements to take before you order.
Read Guide
Why Fabric Leaves the Stenter Narrower Than It Should
Width loss is almost always a grip problem, not a setting problem. Work through the rail in order: brush, pins or clips, holders, chain, guide.
Read GuideBruckner Stenter Pin Plate Type 2 Questions
How do I know which Bruckner plate to order?
Measure hole to hole and the overall plate length on the plate you are replacing and send us both numbers with a photo.
Can you make a plate from a worn sample?
Yes, as long as the mounting holes and plate body are still measurable. Post us one plate.
Do you carry Bruckner brush wheels as well?
Yes, in two sizes, 220 x 158 mm and 155 x 85 mm. See our brush wheel category.
Are the pins carbon steel or stainless steel?
Carbon steel as standard, stainless steel on request.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.