Bruckner Stenter Pin Plate Type 1
Pin plate for Bruckner stenter rails. Bruckner is one of the two big German stenter brands and the machines run long lives in dyeing and finishing mills, so the pin rails are a regular reorder. Copper plate body with two rows of carbon steel or stainless steel pins, matched to the Bruckner holder.
Key Benefits
- Matched to the Bruckner pin plate holder, no drilling on site
- Two pin rows at 3 to 4 pins per cm, pins standing about 5 mm proud
- Copper plate body spreads chamber heat
- Stocked so a Bruckner rail is not held up by an OEM lead time
Application Scenarios
- Bruckner heat setting ranges running knits and wovens
- Rails rebuilt after chain replacement
- Mills recovering fabric width after dyeing
Who It Is For
- Textile finishing mills running Bruckner pin stenters
- Maintenance teams rebuilding a pin rail after a chain overhaul
- Machinery dealers and service companies holding spare part stock for customers
Problems It Solves
- Worn or bent pins let the selvedge slip, so the fabric loses width and the edge frays.
- Pins that sit too low press the fabric onto the hot base plate and scorch the selvedge.
- OEM plates can take weeks to arrive and the stenter stands still while you wait.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Application: Monforts stenter
- Material: plate:copper / pin: corban steel or stainless steel
- Colour: silver and yellow
- Brand: XTY
- Origin: Zhejiang, China
Specifications
| Application | Monforts stenter |
|---|---|
| Material | plate:copper / pin: corban steel or stainless steel |
| Colour | silver and yellow |
| Brand | XTY |
| Origin | Zhejiang, China |
Quality Control
- Dimensions gauged against the reference part on every production batch
- Fit checked on a rail or chain section before packing
- Material certificate held for the stock used
- Parts packed in matched sets from one batch so wear is even along the rail
Customisation Options
- Hole centres matched from your Bruckner sample
- Stainless steel pins on request
- Matched full-rail sets from one batch
How It Compares
| Compared With | What Changes |
|---|---|
| Bruckner pin plate type 2 | A second Bruckner plate pattern. Measure your hole centres and plate length before ordering. |
| Bruckner clips | Pins carry higher tension and run faster; clips leave no mark in the selvedge. |
Fitting and Replacing This Part
Step 1
Stop the machine and let the assembly cool before stripping it
Step 2
Note how the old part sits before removing it
Step 3
Clean the seat completely before fitting the new part
Step 4
Turn the rail by hand for one full pass and check free movement
Step 5
Replace in complete sets so grip and wear stay even across the machine
Related Solutions
- Custom Part Manufacturing From Samples — Pin plates, pin plate holders, clips, brush wheels and other metal parts made to customer requirement, from a sample or a drawing.
- Complete Stenter Rail Rebuild — Chain, pin plates, holders, clips, sliders and graphite strip quoted and shipped as one matched package.
Industries Using This Part
Guides That Mention This Part
How to Choose a Stenter Spare Parts Factory
What to ask a supplier before the first order, from material specification to how they pack a rail set, and which answers should make you walk away.
Read Guide
Stenter Pin Plate and Brush Wheel Size Reference
A working reference of the plate dimensions, hole centres and brush wheel sizes we hold, with the measurements to take before you order.
Read Guide
Why Fabric Leaves the Stenter Narrower Than It Should
Width loss is almost always a grip problem, not a setting problem. Work through the rail in order: brush, pins or clips, holders, chain, guide.
Read GuideBruckner Stenter Pin Plate Type 1 Questions
Which Bruckner machines does this fit?
It fits Bruckner pin rails on this plate pattern. Send a photo with a ruler across the fixing holes and we will confirm.
You list two Bruckner plates. What is the difference?
Different hole spacing and plate length for different rail generations. Measure your old plate and we will match it.
Do you supply Bruckner chains and clips too?
Yes. We carry Bruckner chain, clips, pin plates and lubrication parts. See the Bruckner category.
What is the delivery time?
7 days for standard plates once the order is confirmed.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.