Artos Stenter Pin Plate Second Pattern
The second Artos plate pattern in our range. Same copper plate and steel pin construction, a different hole layout for Artos rails that do not take the 130 mm plate. Mills usually discover which one they need by measuring the plate they are pulling out, so send us the hole centres and we will confirm before you pay.
Key Benefits
- Covers the Artos rails the 130 mm plate does not fit
- Copper plate with carbon steel or stainless steel pins
- Two pin rows at 3 to 4 pins per cm
- Quoted against a sample so the fit is confirmed before production
Application Scenarios
- Artos rails where the standard plate does not seat
- Recommissioning a used Artos stenter
- Second machine on the same floor running a different Artos generation
Who It Is For
- Textile finishing mills running Artos pin stenters
- Maintenance teams rebuilding a pin rail after a chain overhaul
- Machinery dealers and service companies holding spare part stock for customers
- Buyers of used Artos machines with no parts documentation
Problems It Solves
- Buying an Artos plate on the machine brand alone and finding the holes do not line up.
- Worn or bent pins let the selvedge slip, so the fabric loses width and the edge frays.
- OEM plates can take weeks to arrive and the stenter stands still while you wait.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Application: Monforts stenter
- Material: plate:copper / pin: corban steel or stainless steel
- Colour: silver and yellow
- Brand: XTY
- Origin: Zhejiang, China
Specifications
| Application | Monforts stenter |
|---|---|
| Material | plate:copper / pin: corban steel or stainless steel |
| Colour | silver and yellow |
| Brand | XTY |
| Origin | Zhejiang, China |
Quality Control
- Dimensions gauged against the reference part on every production batch
- Fit checked on a rail or chain section before packing
- Material certificate held for the stock used
- Parts packed in matched sets from one batch so wear is even along the rail
Customisation Options
- Matched from your Artos sample plate
- Carbon steel or stainless steel pins
- Matched full-rail sets
How It Compares
| Compared With | What Changes |
|---|---|
| Artos pin plate 4 x 130 x 12 mm | The 130 mm plate runs on 76 mm hole centres. This is the alternative pattern. Measure before ordering. |
| Monforts pin plates | Different brand, different holder. We also convert Artos rails to Monforts rails if you want to standardise. |
Fitting and Replacing This Part
Step 1
Stop the machine and let the assembly cool before stripping it
Step 2
Note how the old part sits before removing it
Step 3
Clean the seat completely before fitting the new part
Step 4
Turn the rail by hand for one full pass and check free movement
Step 5
Replace in complete sets so grip and wear stay even across the machine
Related Solutions
- Custom Part Manufacturing From Samples — Pin plates, pin plate holders, clips, brush wheels and other metal parts made to customer requirement, from a sample or a drawing.
- Complete Stenter Rail Rebuild — Chain, pin plates, holders, clips, sliders and graphite strip quoted and shipped as one matched package.
Industries Using This Part
Guides That Mention This Part
How to Choose a Stenter Spare Parts Factory
What to ask a supplier before the first order, from material specification to how they pack a rail set, and which answers should make you walk away.
Read Guide
Stenter Pin Plate and Brush Wheel Size Reference
A working reference of the plate dimensions, hole centres and brush wheel sizes we hold, with the measurements to take before you order.
Read Guide
Why Fabric Leaves the Stenter Narrower Than It Should
Width loss is almost always a grip problem, not a setting problem. Work through the rail in order: brush, pins or clips, holders, chain, guide.
Read GuideArtos Stenter Pin Plate Second Pattern Questions
Which Artos plate do I need?
Measure hole to hole and the plate length, then send us both figures with a photo. We confirm the pattern before production.
Can you make a plate if I have no part number?
Yes. One sample plate posted to us is enough to match the pattern exactly.
Do you supply Artos chain parts as well?
Yes, including Artos chain with PEEK bush and copper slider. See our Artos category.
What is the lead time?
7 days for standard plates. Matched-to-sample plates take longer and we confirm the date when we quote.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.