Stenter Pin Plate 707 and 708
Pin plates in the 707 and 708 pattern, built on the same copper plate with carbon steel or stainless steel pins as the rest of our stenter range. Mills order these by pattern number when the rail was originally fitted with 707 or 708 plates and the pin rows have worn flat.
Key Benefits
- Ordered by the pattern number already on your parts list
- Two pin rows at 3 to 4 pins per cm, the same grip geometry as the original
- Copper plate body so the pin roots stay cooler in the chamber
- Made in Zhejiang and shipped in 7 days rather than on an OEM lead time
Application Scenarios
- Rebuilding a pin rail that already runs 707 or 708 plates
- Keeping a second machine on the same plate pattern
- Planned shutdown maintenance where the whole rail is replaced at once
Who It Is For
- Textile finishing mills running 707 and 708 pattern pin stenters
- Maintenance teams rebuilding a pin rail after a chain overhaul
- Machinery dealers and service companies holding spare part stock for customers
Problems It Solves
- Worn or bent pins let the selvedge slip, so the fabric loses width and the edge frays.
- Plates bought in small lots from different batches give uneven pin height along the rail.
- OEM plates can take weeks to arrive and the stenter stands still while you wait.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Application: stenter
- Material: plate:copper / pin: corban steel or stainless steel
- Colour: silver and yellow
- Brand: YH
- Origin: Zhejiang, China
Specifications
| Application | stenter |
|---|---|
| Material | plate:copper / pin: corban steel or stainless steel |
| Colour | silver and yellow |
| Brand | YH |
| Origin | Zhejiang, China |
Quality Control
- Dimensions gauged against the reference part on every production batch
- Fit checked on a rail or chain section before packing
- Material certificate held for the stock used
- Parts packed in matched sets from one batch so wear is even along the rail
Customisation Options
- Plates matched from a sample when the pattern number has worn off
- Carbon steel or stainless steel pins
- Matched full-rail sets
How It Compares
| Compared With | What Changes |
|---|---|
| Pin plate 642 | Different plate length and hole pattern. 642 is the short 130 mm plate on 76 mm centres. |
| Clip plates | Pins carry more tension and let the cloth run faster; clips leave no mark on the selvedge. |
Fitting and Replacing This Part
Step 1
Stop the machine and let the assembly cool before stripping it
Step 2
Note how the old part sits before removing it
Step 3
Clean the seat completely before fitting the new part
Step 4
Turn the rail by hand for one full pass and check free movement
Step 5
Replace in complete sets so grip and wear stay even across the machine
Related Solutions
- Custom Part Manufacturing From Samples — Pin plates, pin plate holders, clips, brush wheels and other metal parts made to customer requirement, from a sample or a drawing.
- Complete Stenter Rail Rebuild — Chain, pin plates, holders, clips, sliders and graphite strip quoted and shipped as one matched package.
Industries Using This Part
Guides That Mention This Part
How to Choose a Stenter Spare Parts Factory
What to ask a supplier before the first order, from material specification to how they pack a rail set, and which answers should make you walk away.
Read Guide
Stenter Pin Plate and Brush Wheel Size Reference
A working reference of the plate dimensions, hole centres and brush wheel sizes we hold, with the measurements to take before you order.
Read Guide
Why Fabric Leaves the Stenter Narrower Than It Should
Width loss is almost always a grip problem, not a setting problem. Work through the rail in order: brush, pins or clips, holders, chain, guide.
Read GuideStenter Pin Plate 707 and 708 Questions
What is the difference between 707 and 708?
They are two plate patterns from the same family. Send us the plate you are replacing, or the hole to hole measurement, and we will confirm which one you need.
Can you supply if I only know the machine, not the plate number?
Yes. A photo of the plate in the holder with a ruler across the fixing holes is enough for us to identify it.
What are the pins made of?
Carbon steel as standard, stainless steel on request when the finishing chemistry is aggressive.
What is the minimum order?
We ship single plates for a fit trial and full-rail sets for production. Tell us your rail length and we will work out the plate count.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.