Stenter Pin Plate 642 Small Size 4 x 130 x 12 mm
Pin plate 642 is the small-size plate in our Monforts range, 4 x 130 x 12 mm with two 4 mm fixing holes on 76 mm centres. Mills order it when the rail carries short plates and a full-length plate would foul the chain at the width adjustment. Copper plate body, carbon steel or stainless steel pins.
Key Benefits
- Short 130 mm plate body clears the rail where long plates bind on width change
- 4 mm fixing holes on 76 mm centres match the standard holder pattern
- Copper body conducts chamber heat away from the pin roots
- Ordered by size code so repeat orders need no drawings
Application Scenarios
- Narrow width settings where plate length has to stay short
- Rail sections around the width adjustment gear
- Mills standardising on one plate size across several machines
Who It Is For
- Textile finishing mills running Monforts pin stenters
- Maintenance teams rebuilding a pin rail after a chain overhaul
- Machinery dealers and service companies holding spare part stock for customers
- Mills that keep a size-coded spare parts list rather than working from samples
Problems It Solves
- Worn or bent pins let the selvedge slip, so the fabric loses width and the edge frays.
- Long plates binding on the rail when the width is pulled in.
- OEM plates can take weeks to arrive and the stenter stands still while you wait.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Application: Monforts stenter
- Size: 4*130*12, hole to hole 76mm, 2 holes, hole 4mm
- Material: plate:copper / pin: corban steel or stainless steel
- Colour: silver and yellow
- Brand: XTY
- Origin: Zhejiang, China
Specifications
| Application | Monforts stenter |
|---|---|
| Size | 4*130*12, hole to hole 76mm, 2 holes, hole 4mm |
| Material | plate:copper / pin: corban steel or stainless steel |
| Colour | silver and yellow |
| Brand | XTY |
| Origin | Zhejiang, China |
Quality Control
- Dimensions gauged against the reference part on every production batch
- Fit checked on a rail or chain section before packing
- Material certificate held for the stock used
- Parts packed in matched sets from one batch so wear is even along the rail
Customisation Options
- Other plate lengths cut to your hole centres
- Stainless steel pins for aggressive finishing chemistry
- Full-rail matched sets from one batch
How It Compares
| Compared With | What Changes |
|---|---|
| Pin plate 707-708 | Same copper and steel build, different plate length and hole pattern. Check the hole centres on the plate you are replacing before ordering. |
| Full-length pin plates | The 130 mm body clears tight rail sections where a longer plate would catch. |
Fitting and Replacing This Part
Step 1
Stop the machine and let the assembly cool before stripping it
Step 2
Note how the old part sits before removing it
Step 3
Clean the seat completely before fitting the new part
Step 4
Turn the rail by hand for one full pass and check free movement
Step 5
Replace in complete sets so grip and wear stay even across the machine
Related Solutions
- Custom Part Manufacturing From Samples — Pin plates, pin plate holders, clips, brush wheels and other metal parts made to customer requirement, from a sample or a drawing.
- Complete Stenter Rail Rebuild — Chain, pin plates, holders, clips, sliders and graphite strip quoted and shipped as one matched package.
Industries Using This Part
Guides That Mention This Part
Stenter Pin Plate and Brush Wheel Size Reference
A working reference of the plate dimensions, hole centres and brush wheel sizes we hold, with the measurements to take before you order.
Read Guide
How to Choose and Order a Stenter Pin Plate
Order on hole centres and plate length, not on the machine brand. What to measure, which material to specify and why plates should be replaced in matched sets.
Read GuideStenter Pin Plate 642 Small Size 4 x 130 x 12 mm Questions
What are the exact dimensions of pin plate 642?
4 x 130 x 12 mm, two fixing holes of 4 mm diameter, hole to hole 76 mm.
Is the plate copper all the way through?
The plate body is copper. The pins are carbon steel or stainless steel, brazed into the plate.
How do I confirm 642 is my size?
Measure the hole to hole distance on your old plate. If it is 76 mm with 4 mm holes and the plate is 130 mm long, 642 is the right part.
Do you sell single plates or full sets?
Both. Most mills order full-rail sets so pin height is identical along the chain, but we ship single plates for trials.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.