LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003

Product photograph supplied by the factory. Colour and print are set per order.

CAT6 Cable

FTP Cat6 Green

Cable 1000ft CAT6 Cable 305M Pure Copper 550Mhz Ethernet LAN FTP 23AWG RJ45 Network Wire Bulk Blue Roll Internet Lead LSZH Jacket

This is the FTP CAT6 bare copper specification in the LANP CAT6 Cable range. The factory specification for this line reads: Cable 1000ft CAT6 Cable 305M Pure Copper 550Mhz Ethernet LAN FTP 23AWG RJ45 Network Wire Bulk Blue Roll Internet Lead LSZH Jacket.

It is supplied with a LSZH jacket, in Blue, Green, packed as 305 m, 1000 ft. Order quantities start at 100 m for evaluation and scale to 50,000 m per run, at a typical bulk lead time of 3-7 days.

CategoryCAT6 Cable
ShieldingFTP
Conductorbare copper
JacketLSZH
MOQ100 m
Lead Time3-7 days

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Bare Copper Conductor

The conductor in FTP Cat6 Green is bare copper, not copper-clad aluminium. On a long run that shows up as voltage still present at the far termination rather than lost in the cable.

FTP Screening

The FTP screen on FTP Cat6 Green is there for routes that share containment with power cable or pass through plant areas. Bond it at the panel and the link stays stable.

LSZH Jacket Option

LSZH on FTP Cat6 Green is a life safety decision rather than a general upgrade. Specify it for stairwells, corridors and public buildings.

23 AWG Conductor

FTP Cat6 Green runs a 23 AWG conductor. Gauge is the figure that decides PoE reach and heat rise in a full bundle, so it is measured, not assumed.

OEM Branding Available

OEM on FTP Cat6 Green means print on the cable itself from 1 km — still readable when an electrician pulls the last ten metres off the drum.

Tested Before It Ships

Every FTP Cat6 Green batch is checked for conductor resistance, continuity and dielectric strength before it reaches packing. A batch that fails a gate is held, not blended into a shipment.

Technical Data

Specification Sheet

Values below are the factory specification for FTP Cat6 Green. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameFTP Cat6 Green
CategoryCAT6 Cable
Cable ClassCAT6
ShieldingFTP — overall aluminium foil screen
Conductor Materialbare copper
Conductor Gauge23 AWG
Bandwidth550 MHz
Jacket MaterialLSZH
Jacket ColourBlue, Green
ConnectorRJ45 8P8C, gold-plated contacts
Packaging305 m, 1000 ft
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT6 specification
  • FTP — overall aluminium foil screen
  • Rated to 550 MHz
  • RJ45 8P8C, gold-plated contacts
  • Jacket printed with specification and rating as standard

Materials

  • Conductor: bare copper
  • Jacket: LSZH
  • Screen: aluminium foil with drain wire

Who It Is For

  • Structured cabling contractors on new-build and refit projects
  • Integrators specifying PoE lighting, cameras and access points
  • Data centre teams building horizontal copper to the rack
  • Distributors stocking the mainstream specification in volume

Problems It Solves

  • Links that pass continuity but fail return loss at certification
  • PoE++ loads pushing conductor temperature above spec in full bundles
  • Cable that kinks in tight ceiling voids and loses its twist geometry
  • Colour availability limiting service segregation across a floor

Application Scenarios

  • New horizontal cabling to desks and wireless access points
  • PoE lighting and building management device drops
  • Camera runs where 4K streams and PoE share the same link
  • Riser and inter-floor links inside a single building
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Foil and braid shielding

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester

Certification

  • HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
FTP Cat6 BlueElectrically the same build in a different jacket colour — blue, green here against blue. Colour is how most sites separate services, so it is worth deciding before the order rather than after.
FTP Cat6 GrayElectrically the same build in a different jacket colour — blue, green here against grey. Colour is how most sites separate services, so it is worth deciding before the order rather than after.
Use Guide

Installing It Without Losing Performance

  • Do not force FTP Cat6 Green through a route. Stretching the conductors changes the twist geometry permanently, and the damage is invisible until the tester finds it.
  • Keep untwist length to the minimum the connector allows when terminating FTP Cat6 Green — it is the most common reason a field-terminated link fails while a factory cord on the same run passes.
  • Keep FTP Cat6 Green off sharp edges and out of tight bends. Impedance changes at a deformed bend do not average out over the link.
  • Bond the FTP screen on FTP Cat6 Green to a defined earth path at the patch panel. An unbonded screen adds cost and delivers nothing.

Before a first bulk order of FTP Cat6 Green: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT6 Cable Range

See all 17 cat6 cable products →

Related guides

Where it is installed

Questions

FTP Cat6 Green — Questions

Is the conductor in FTP Cat6 Green really bare copper?

It is. FTP Cat6 Green is specified as bare copper and the batch resistance record is available with the shipment if you want to check it.

How is FTP Cat6 Green packed?

The stocked format is 305 m, 1000 ft. Custom reel and coil lengths run on production orders — send the length schedule with the enquiry.

Can FTP Cat6 Green be supplied in another jacket colour?

FTP Cat6 Green is catalogued in blue. Other colours run on production orders, and colour is normally decided at the same time as the jacket print text.

What is the minimum order and lead time for FTP Cat6 Green?

A trial reel of 100 m is enough to evaluate FTP Cat6 Green. Production runs go to 50,000 m and take about 3-7 days once the PO is confirmed.

Is FTP Cat6 Green covered by a compliance certificate?

FTP Cat6 Green falls under the HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable.

Request pricing on FTP Cat6 Green

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.