JL259A
Aruba 2930F Switch Series is designed for customer creating digital workplaces optimized for mobile users with an integrated wired and wireless approa

HPE J9151A - Aruba Transceiver HP X132 10G SFP+ LC LR Transceiver. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacement warranty as standard.
HPE J9151A - Aruba Transceiver HP X132 10G SFP+ LC LR Transceiver. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacement warranty as standard.
The serial list for your J9151A consignment is released before despatch, so it can be checked on the manufacturer portal while the goods are still with us.
Modules optics rails and power options are reviewed against J9151A before the quotation is issued, so the install crew is not blocked by a line nobody costed.
A vendor support contract for J9151A is written under the end customer name, so the entitlement sits with the organisation that owns the outage.
Running one access standard across buildings of very different ages
Delivering inside vacation windows against a budget year that rarely aligns with the install date
Rolling out one site design across many locations on a fixed bill of materials
Deploying managed hardware at customer premises with consistent revision and firmware
As published by Aruba for this part number. Full electrical, port and performance specifications are issued with the quotation against the current datasheet revision.
| Ports | 1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-LR); Duplex: full only |
|---|---|
| Connector type | LC |
| Wavelength | 1310 nm |
| Dimensions | 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm) |
| Weight | 0.04 lb. (0.02 kg) |
| Transceiver form factor | SFP+ |
| Operating temperature | 32 degF to 158 degF (0 degC to 70 degC) |
| Operating relative humidity | 0% to 85%, noncondensing |
| Nonoperating/Storage temperature | -40 degF to 185 degF (-40 degC to 85 degC) |
| Altitude | up to 10,000 ft. (3 km) |
| Power consumption typical | 0.9 W |
| Power consumption maximum | 1 W |
| Cable type | Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1 |
| Cable Maximum distance | · 2m-10km with 9/125 µm single-mode cable |
| Cable length | 2m to 10km |
| Fiber type | Single Mode |
| Part Number | J9151A |
|---|---|
| Brand | Aruba |
| Category | Aruba Switches |
| Product Condition | New factory sealed |
| Serial Traceability | Full serial list supplied before shipment |
| Warranty | 12 months replacement plus optional vendor support contract |
| Packaging | Original vendor carton with export grade outer |
| Lead Time | Confirmed in writing per line at quotation |
| Delivery | Worldwide courier or freight from Hong Kong |
Values are taken from each manufacturer specification. A blank means the manufacturer does not publish that attribute for that model.
| Attribute | J9151A | JL259A | JL260A | JL261A |
|---|---|---|---|---|
| Ports | 1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-LR); Duplex: full... | - | - | - |
| Connector type | LC | - | - | - |
| Form Factor | 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm) | Aruba 2930F 24G 4SFP Switch | Aruba 2930F 48G 4SFP Switch | Aruba 2930F 24G PoE+ 4SFP Switch |
| Weight | 0.04 lb. (0.02 kg) | - | - | - |
| Throughput | - | 56 Gb/s | 104 Gb/s | 56 Gb/s |
| MAC Table | - | 32768 entries | 32768 entries | 32768 entries |
| Product page | View J9151A | View JL259A | View JL260A | View JL261A |
Check J9151A character for character including any suffix. On this class of hardware a single trailing character commonly changes the software tier, the power option, or whether a bundle is included.
Confirm rack space, power feed, cabling and any uplink or accessory dependency before the order rather than on the day of installation.
Photograph the sealed carton, reconcile the serial against the list supplied before shipment, then open and confirm the unit matches the label.
Power the unit, capture the software version and the port or drive inventory, and record it while the unit is still accessible.
Register the support contract under the end user name so the entitlement sits with the organisation that owns the outage.
Aruba 2930F Switch Series is designed for customer creating digital workplaces optimized for mobile users with an integrated wired and wireless approa
Aruba 2930F Switch Series is designed for customer creating digital workplaces optimized for mobile users with an integrated wired and wireless approa
Aruba 2930F Switch Series is designed for customer creating digital workplaces optimized for mobile users with an integrated wired and wireless approa
Aruba 2930F Switch Series is designed for customer creating digital workplaces optimized for mobile users with an integrated wired and wireless approa
The Aruba 2930M Switch Series is designed for digital workplaces optimized for mobile users. It is supplied new factory sealed, with the serial list i
The Aruba 2930M Switch Series provides a convenient and cost-effective access switch solution. It is supplied new factory sealed, with the serial list
The Aruba 2930M Switch Series is designed for digital workplaces optimized for mobile users. Aruba 2930M 48G 1-slot Switch. It is supplied new factory
The Aruba 2930M Switch Series is designed for digital workplaces optimized for mobile users. The published specification for JL322A lists 1 GB DDR3 of
Top of rack switching, compute and storage delivered in the phased increments a cabinet build actually consumes.
Access, distribution and wireless supplied to one standard so every closet in every building behaves the same way.
Repeatable CPE and aggregation hardware supplied at the volume and consistency a managed service contract depends on.
Wireless projects are rarely stopped by the access point. They are stopped by a mount, a PoE class or a licence count that nobody confirmed before the order went out.
A cabinet is commissioned as a unit, so it should be supplied as one. Switches, optics, rails and power leads belong in the same consignment.
A support contract registered under a reseller name is of limited use to the organisation that owns the outage. Entitlement is written under the end user name.
The tender required a firm price and date at submission, months before any award, across a bill of materials of several hundred lines
Each site had bought its own network hardware locally, so no two plants ran the same equipment and no spares could be shared
Coding, fibre type, reach and connector are four independent decisions, and any one of them can stop a link coming up.
A support contract is bought once and used on the worst day of the year. The level and the name it is registered under both matter.
Five decisions set the part number. Getting them in the right order prevents most of the changes that happen late in a project.
Standard supply is new factory sealed in the original vendor carton. If a quotation offers another condition that is stated explicitly in writing before you commit.
Yes. Serials are issued before shipment so you can check them on the manufacturer portal while the goods are still with us.
Availability is confirmed in writing per line at quotation rather than as a project average, because one late line is what moves an installation date.
12 months replacement as standard. A vendor support contract is available separately and is registered under the end user name.
They are quoted as separate lines and reviewed against the chassis before the quotation is issued, so they reach site in the same consignment as the unit they belong to.
Yes. Consignments go worldwide by courier or freight from Hong Kong, with the routing chosen against the destination clearance regime and your deadline.
Yes. Consignments can be released directly to an end customer address under your own documentation.
Send the quantity and destination country. Availability and lead time come back in writing, with the serial list before shipment.