652611-B21
HPE 300GB 2.5" SAS 15K 6Gb/s HS Enterprise Hard Drive for Gen9 S-ERVER. The published specification for 652611-B21 lists 300,000MB of capacity. It is

HPE 1TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty Digitally Signed Firmware HDD S-ERVER. The published specification for 832514-B21 lists a published data transfer rate of 1.2 GBps. It is supplied new factory sealed, with the serial list issued before shipme...
HPE 1TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty Digitally Signed Firmware HDD S-ERVER. The published specification for 832514-B21 lists a published data transfer rate of 1.2 GBps. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacement warranty as standard.
1.2 GBps published for 832514-B21 as its data transfer rate, confirmed against the current datasheet revision when the line is quoted.
The serial list for your 832514-B21 consignment is released before despatch, so it can be checked on the manufacturer portal while the goods are still with us.
Modules optics rails and power options are reviewed against 832514-B21 before the quotation is issued, so the install crew is not blocked by a line nobody costed.
A vendor support contract for 832514-B21 is written under the end customer name, so the entitlement sits with the organisation that owns the outage.
Building repeatable nodes where every batch has to match the last one
Adding capacity in defined increments as cabinets and rows fill up
Rolling out one site design across many locations on a fixed bill of materials
Deploying managed hardware at customer premises with consistent revision and firmware
As published by HPE for this part number. Full electrical, port and performance specifications are issued with the quotation against the current datasheet revision.
| Type | Hot-swap |
|---|---|
| Form Factor | 2.5 SFF |
| Total Qty | 1 |
| Form Factor (metric) | 6.4 cm SFF |
| Width | 3 in |
| Depth | 4.7 in |
| Height | 0.6 in |
| Min Operating Temperature | 50 degF |
| Max Operating Temperature | 95 degF |
| Form Factor | 2.5 SFF |
| Spindle Speed | 7200 rpm |
| Bytes per Sector | 512 |
| Average Seek Time | 6.8 ms |
| Max Seek Time | 17 ms |
| Track-to-Track Seek Time | 0.5 ms |
| Data Transfer Rate | 1.2 GBps |
| Hard Drive Type | Hot-swap hard drive |
| Form Factor (Short) | 2.5 |
| Interface | Serial Attached SCSI 3 |
| Form Factor (metric) | 6.4 cm SFF |
| Form Factor (Short) (metric) | 6.4 cm |
| Storage Interface | Serial Attached SCSI 3 |
| Part Number | 832514-B21 |
|---|---|
| Brand | HPE |
| Category | HPE Server Components |
| Product Condition | New factory sealed |
| Serial Traceability | Full serial list supplied before shipment |
| Warranty | 12 months replacement plus optional vendor support contract |
| Packaging | Original vendor carton with export grade outer |
| Lead Time | Confirmed in writing per line at quotation |
| Delivery | Worldwide courier or freight from Hong Kong |
Values are taken from each manufacturer specification. A blank means the manufacturer does not publish that attribute for that model.
| Attribute | 832514-B21 | 652611-B21 | 655710-B21 | 672631-B21 |
|---|---|---|---|---|
| Throughput | 1.2 GBps | - | - | - |
| Interface | Serial Attached SCSI 3 | SAS | SATA | - |
| Form Factor | Hot-swap | - | 2.5 inch | - |
| Drive Support | Hot-swap hard drive | - | - | - |
| Capacity | - | 300,000MB | 1TB | - |
| Speed | - | - | 7.2K RPM | - |
| Product page | View 832514-B21 | View 652611-B21 | View 655710-B21 | View 672631-B21 |
Check 832514-B21 character for character including any suffix. On this class of hardware a single trailing character commonly changes the software tier, the power option, or whether a bundle is included.
Confirm rack space, power feed, cabling and any uplink or accessory dependency before the order rather than on the day of installation.
Photograph the sealed carton, reconcile the serial against the list supplied before shipment, then open and confirm the unit matches the label.
Power the unit, capture the software version and the port or drive inventory, and record it while the unit is still accessible.
Register the support contract under the end user name so the entitlement sits with the organisation that owns the outage.
HPE 300GB 2.5" SAS 15K 6Gb/s HS Enterprise Hard Drive for Gen9 S-ERVER. The published specification for 652611-B21 lists 300,000MB of capacity. It is
HPE 1TB SATA 6G Midline 7.2K SFF (2.5in) SC 1yr Wty Digitally Signed Firmware HDD S-ERVER. The published specification for 655710-B21 lists 1TB of cap
672631-B21- Enterprise Memory for HPE Server HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit for HPE ProLiant Gen7,
713985-B21- Enterprise Memory for HPE Server HPE 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage Memory Kit S-ERVER.
HPE 1.2TB SAS 6G Enterprise 10K SFF (2.5in) SC 1yr Wty HDD For Use With Gen8/Gen9 S-ERVER. The published specification for 718162-B21 lists 1,200,243M
726719-B21- Enterprise Memory for HPE Server HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit:ProLiant Servers - Memory Gen
726722-B21- Enterprise Memory for HPE Server HP 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit S-ERVER. It is supplied new fa
728629-B21- Enterprise Memory for HPE Server HP 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit S-ERVER. It is supplied new fa
Top of rack switching, compute and storage delivered in the phased increments a cabinet build actually consumes.
Hardware supplied with the traceability and change discipline a clinical environment requires.
A cabinet is commissioned as a unit, so it should be supplied as one. Switches, optics, rails and power leads belong in the same consignment.
A server order is judged on whether the node goes in on the booked date, which depends almost entirely on the parts that are not the server.
A support contract registered under a reseller name is of limited use to the organisation that owns the outage. Entitlement is written under the end user name.
Nodes were arriving without rails or caddies, so racking waited on a second consignment and the revenue date moved
The tender required a firm price and date at submission, months before any award, across a bill of materials of several hundred lines
A support contract is bought once and used on the worst day of the year. The level and the name it is registered under both matter.
A drive that fits physically can still be rejected. Interface, caddy generation and firmware all have to agree with the chassis.
Checks that cost minutes on arrival and save a great deal later. Most of them can be done before the carton is opened.
Standard supply is new factory sealed in the original vendor carton. If a quotation offers another condition that is stated explicitly in writing before you commit.
Yes. Serials are issued before shipment so you can check them on the manufacturer portal while the goods are still with us.
Availability is confirmed in writing per line at quotation rather than as a project average, because one late line is what moves an installation date.
12 months replacement as standard. A vendor support contract is available separately and is registered under the end user name.
The published data transfer rate is 1.2 GBps. Full port and performance specifications are issued with the quotation against the current datasheet revision.
Yes. Consignments go worldwide by courier or freight from Hong Kong, with the routing chosen against the destination clearance regime and your deadline.
Yes. Consignments can be released directly to an end customer address under your own documentation.
Send the quantity and destination country. Availability and lead time come back in writing, with the serial list before shipment.