P13660-B21
HPE 960GB SATA MU SFF SC DS SSD. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacement warranty as


HPE 300GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Warranty HDD For Use with Gen8/Gen9 or Newer S-ERVER. The published specification for 759208-B21 lists 300,000MB of capacity. It is supplied new factory sealed, with the serial list issued before shipment and...
HPE 300GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Warranty HDD For Use with Gen8/Gen9 or Newer S-ERVER. The published specification for 759208-B21 lists 300,000MB of capacity. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacement warranty as standard.
300,000MB supplied against a stated chassis or array generation, so acceptance is confirmed before despatch rather than at the rack.
A vendor support contract for 759208-B21 is written under the end customer name, so the entitlement sits with the organisation that owns the outage.
The serial list for your 759208-B21 consignment is released before despatch, so it can be checked on the manufacturer portal while the goods are still with us.
Modules optics rails and power options are reviewed against 759208-B21 before the quotation is issued, so the install crew is not blocked by a line nobody costed.
Building repeatable nodes where every batch has to match the last one
Adding capacity in defined increments as cabinets and rows fill up
Rolling out one site design across many locations on a fixed bill of materials
Deploying managed hardware at customer premises with consistent revision and firmware
As published by HPE for this part number. Full electrical, port and performance specifications are issued with the quotation against the current datasheet revision.
| Capacity | 300,000MB |
|---|---|
| Height | 0.62 in (15.6 mm) |
| Width | 2.98 in (75.7 mm) |
| Depth | 4.67 in (118.7 mm) |
| Interface | SAS |
| Transfer Rate Synchronous (Maximum) | 12 Gb/sec |
| Seek Time (typical reads, including settling) | Single Track: 0.15 ms Average: 2.9 ms Full-Stroke: 5.9 ms Rotational Speed: 15,000 rpm |
| Physical Configuration | Bytes/Sector: 512 Logical Blocks: 585,937,500 |
| Operating Temperature (System Inlet Air Temperature) | 50 deg to 95 deg F (10 deg to 35 deg C) |
| Supported Device | Gen8/Gen9 or newer |
| Spare part number | 759546-001, 759209-B21 |
| Part Number | 759208-B21 |
|---|---|
| Brand | HPE |
| Category | HPE Server Components |
| Product Condition | New factory sealed |
| Serial Traceability | Full serial list supplied before shipment |
| Warranty | 12 months replacement plus optional vendor support contract |
| Packaging | Original vendor carton with export grade outer |
| Lead Time | Confirmed in writing per line at quotation |
| Delivery | Worldwide courier or freight from Hong Kong |
Values are taken from each manufacturer specification. A blank means the manufacturer does not publish that attribute for that model.
| Attribute | 759208-B21 | P13660-B21 | P13662-B21 | P15968-B21 |
|---|---|---|---|---|
| Capacity | 300,000MB | - | - | - |
| Interface | SAS | - | - | - |
| Drive Support | Gen8/Gen9 or newer | - | - | - |
| Memory Type | - | - | - | DDR4-2133 |
| # of Cores | - | - | - | 8 |
| Processor Base Frequency | - | - | - | 1.90 GHz |
| Product page | View 759208-B21 | View P13660-B21 | View P13662-B21 | View P15968-B21 |
Check 759208-B21 character for character including any suffix. On this class of hardware a single trailing character commonly changes the software tier, the power option, or whether a bundle is included.
Confirm rack space, power feed, cabling and any uplink or accessory dependency before the order rather than on the day of installation.
Photograph the sealed carton, reconcile the serial against the list supplied before shipment, then open and confirm the unit matches the label.
Power the unit, capture the software version and the port or drive inventory, and record it while the unit is still accessible.
Register the support contract under the end user name so the entitlement sits with the organisation that owns the outage.
HPE 960GB SATA MU SFF SC DS SSD. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacement warranty as
HPE 1.92TB SATA MU SFF SC DS SSD. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacement warranty as
P15968-B21 is the Intel Xeon-Bronze 3206R (1.9GHz/8-core/85W) FIO Processor Kit for HPE ProLiant DL360 Gen10 server. It is supplied new factory sealed
HPE P15974-B21 Intel Xeon-Silver 4210R (2.4GHz/10-core/100W) FIO Processor Kit for HPE ProLiant DL360 Gen10 S-ERVER. It is supplied new factory sealed
Hpe P15977-B21, Intel Xeon-Silver 4214R (2.4GHz/12-core/100W) FIO Processor Kit for HPE ProLiant DL360 Gen10 S-ERVER. It is supplied new factory seale
HPE 800GB SAS MU SFF SC SSD. It is supplied new factory sealed, with the serial list issued before shipment and 12 months replacement warranty as stan
HPE P23547-B21, Intel Xeon-Bronze 3206R (1.9GHz/8-core/85W) FIO Processor Kit for HPE ProLiant DL380 Gen10 S-ERVER. It is supplied new factory sealed,
HPE P23550-L21, Intel Xeon-Silver 4214R (2.4GHz/12-core/100W) FIO Processor Kit for HPE ProLiant DL380 Gen10 S-ERVER. It is supplied new factory seale
Hardware supplied with the traceability and change discipline a clinical environment requires.
Top of rack switching, compute and storage delivered in the phased increments a cabinet build actually consumes.
Hong Kong is a practical despatch point for most of the world. Consignments go to the site, not to a central store and then out again.
An integrator carries the risk between quoting a client and receiving the hardware. Firm pricing and a written lead time per line is what makes that risk manageable.
A cabinet is commissioned as a unit, so it should be supplied as one. Switches, optics, rails and power leads belong in the same consignment.
The tender required a firm price and date at submission, months before any award, across a bill of materials of several hundred lines
Nodes were arriving without rails or caddies, so racking waited on a second consignment and the revenue date moved
A drive that fits physically can still be rejected. Interface, caddy generation and firmware all have to agree with the chassis.
Checks that cost minutes on arrival and save a great deal later. Most of them can be done before the carton is opened.
The choice is rarely about quality. It is about entitlement, traceability and what happens eighteen months after the invoice is paid.
Standard supply is new factory sealed in the original vendor carton. If a quotation offers another condition that is stated explicitly in writing before you commit.
Yes. Serials are issued before shipment so you can check them on the manufacturer portal while the goods are still with us.
Availability is confirmed in writing per line at quotation rather than as a project average, because one late line is what moves an installation date.
12 months replacement as standard. A vendor support contract is available separately and is registered under the end user name.
The manufacturer lists capacity of 300,000MB. Capacity is quoted against a named chassis or array generation, because acceptance depends on the platform rather than on the capacity alone.
Yes. Consignments go worldwide by courier or freight from Hong Kong, with the routing chosen against the destination clearance regime and your deadline.
Yes. Consignments can be released directly to an end customer address under your own documentation.
Send the quantity and destination country. Availability and lead time come back in writing, with the serial list before shipment.