SFL: Real Human Hair Toupee
SFL is a stock men's hair system with a 1 inch 0.06mm transparent skin front lace base, built on a 7 by 9 inch template. The skin front uses a V-loop technique to eliminate visible knots at the hairline, which helps the front read as natural under close inspection. It features 6 inch Indian Remy hair with a 3.0 cm wave and about 100% density, allowing for free styling without shedding. The unit is shipped within 24 hours if uncut, but custom base cutting adds 3 to 5 days to the dispatch time. It is designed for daily wear with a focus on a natural-looking hairline and breathability.
Key Benefits
- Skin front with V-loop technique hides knots for a natural hairline under direct light
- 0.06mm thin skin front is nearly invisible when worn, blending with scalp tone
- Lace base allows airflow and breathability, reducing scalp heat during daily wear
- Indian Remy hair with aligned cuticles resists tangling and shedding
- 6 inch length and 3.0 cm wave allow for versatile styling without exposing base
- Stock unit dispatched within 24 hours if not cut, faster than custom builds
Problems It Solves
- Visible knots at the hairline that appear under bright light or on camera
- Full skin bases that seal the scalp and cause discomfort through long wear
- Lace fronts that shed knots or thin out at the perimeter after a few weeks
- Hair that tangles or sheds due to low-quality or non-Remy hair
- Long wait times for custom units when a replacement is needed quickly
Who It Is For
- Men with front to mid crown hair loss seeking a natural-looking hairline
- Wearers who want a breathable base that doesn't seal the scalp
- Hair replacement studios fitting clients who prefer a visible hairline over full skin
- Barbers cutting the system in on the head after fitting
- Wholesale buyers adding a skin front lace option to their stock range
Where It Is Worn
- Daily wear in office or social settings where the hairline is seen up close
- Wearers who sweat and need a breathable base that doesn't trap heat
- Clients who want a natural-looking front without visible knots or lace
- Salons fitting a first-time wearer who needs a low-maintenance, natural front
- Distributors stocking a mid-range option between full lace and full skin
Technical Features
- 1 inch 0.06mm transparent skin front with V-loop technique at the hairline
- Full Swiss lace base across the sides and crown for breathability
- 7 by 9 inch base size with a 1 inch skin front strip at the front
- Indian Remy hair with cuticles aligned in one direction
- 3.0 cm wave and curl setting supplied as standard
- About 100% density, light to medium, suitable for natural volume
- Free style hairline allows for parting and styling in any direction
Specifications
| Model | SFL |
|---|---|
| Base Type | 1 inch 0.06mm skin front Swiss lace base |
| Base Size | 7 x 9 inches |
| Hair Length | 6 inches |
| Hair Texture | Indian Remy hair, similar European texture |
| Density | About 100% |
| Wave and Curl | 3.0 cm |
| Hair Colour | Many colours available including 1B10#, 1B30#, 1B65#, 613# |
| Hair Style | Free style |
| Dispatch | Within 24 hours if uncut; 3-5 days if base cut |
| Transit Time | About 5 to 10 days |
| Returns | 30 days on unused uncut un-recoloured units |
Materials
- 0.06mm transparent skin front material
- Swiss lace base material
- Indian Remy human hair with cuticles aligned
- V-loop technique used at the front hairline to hide knots
How It Is Made
- Base is cut to the 7 by 9 inch template with a 1 inch skin front strip
- V-loop technique applied at the front hairline to eliminate visible knots
- Indian Remy hair is ventilated into the lace and skin front by hand
- Hair is set to a 3.0 cm wave and steamed for consistency
- Unit is washed, dried, and inspected before packing
- Dispatched within 24 hours if not cut; custom cutting adds 3 to 5 days
Quality Checks Before Dispatch
- Hairline knots inspected under light to confirm V-loop coverage
- Base size measured against the 7 by 9 inch spec before packing
- Hair density checked against the 100% target across front mid and crown
- Colour matched to the ordered code under daylight before dispatch
- No visible knots or loose hairs found after final inspection
Customisation Options
- Base size changed from 7 by 9 inches to your own template
- Hair length adjusted from the stock 6 inches to shorter or longer
- Density increased or decreased from the standard 100%
- Colour selected from the full code range including grey blends
- Wave and curl changed from the standard 3.0 cm
- Base type switched to full skin or full lace if breathability or thinness is preferred
How It Compares
| Full Swiss lace hair system | SFL has a skin front for a more natural hairline but is less breathable than full lace due to the skin strip |
| Full thin skin poly system | SFL breathes better and has a more natural front but is less seamless than full skin |
| Custom made skin front lace unit | SFL ships in 24 hours if uncut, while a custom build is made to your template and colour |
Use And Care Guide
- Make a template of your scalp before ordering if you are between sizes
- Cut the base back to your template line before the first fitting
- Attach with tape or liquid adhesive on the lace and skin perimeter
- Have the hair cut in on the head so the front blends with your own hairline
- Wash with a gentle wig shampoo and avoid alcohol-based products on the knots
- Clean adhesive residue from the skin front after each removal to maintain bond
Other Units Buyers Compare With This
Questions About This Unit
How long does the skin front lace system last?
Actual life depends on how often you wash, style, and re-attach it. The unit is designed for 3 to 4 months of daily wear under normal conditions.
Is the 7 by 9 inch base size the only option?
7 by 9 inches is the stock size. Send your own template or measurements and the same base construction can be made to your size.
Will the hairline look natural on camera?
The V-loop front eliminates visible knots and the skin front blends with the scalp, so it reads as natural under camera light.
How fast is dispatch and delivery?
SFL is a stock unit and is sent within 24 hours if not cut. Transit is normally about 5 to 10 days depending on destination.
Can I return it if the colour is wrong?
Yes, if the unit has not been used, cut, styled, washed, or recoloured. Once cut or styled, it cannot be returned.
Do you supply salons and distributors?
Yes. Send your base type, size, and colour list on WhatsApp and we will quote the range you want to stock.
What colour codes are available?
The full men's colour range includes 1# jet black through 613#, and grey blend codes such as 1B10#, 1B30#, 1B65#.
Ask About SFL: Real Human Hair Toupee
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.