French Lace Front With 1 inches PU Mens Lace Front Wigs
This men's lace front wig is built on a French lace front with a 1 inch PU strip at the back, using 6 inch Indian Remy hair at medium density, approximately 120%. The unit ships in an 8 by 10 inch base size and is dispatched within 24 hours if not custom-cut. The front lace is bleached to reduce knot visibility, helping the hairline blend with the scalp under close inspection. It is designed for daily wear with a natural look, and is available in a wide range of colour codes including grey blends such as 1B10#, 1B30#, and 1B65#.
Key Benefits
- French lace front with bleached knots gives a natural hairline that is hard to detect in daylight
- 1 inch PU strip at the back provides a smooth surface for tape or glue attachment
- Indian Remy hair with aligned cuticles resists tangling and feels more natural than synthetic
- 6 inch length allows for multiple styling options without exposing the base
- Medium density at about 120% offers volume without appearing too thick
- Stock item shipped within 24 hours, avoiding long custom build wait times
Problems It Solves
- Visible dark knots at the hairline that give away the unit in bright light
- Full skin bases that trap heat and feel sealed during long wear
- Lace perimeters that shed knots or fray after a few weeks of use
- Units that require custom build time when a replacement is needed urgently
- Hairlines that look artificial or too thick due to poor knot blending
Who It Is For
- Men with thinning hair at the front or crown who want a natural-looking hairpiece
- Wearers who sweat and need better breathability than full skin or mono bases
- Hair replacement studios needing a repeatable stock unit with a visible hairline
- Barbers who cut the hair in on the head after fitting
- Wholesale buyers building a range with lace front options for different markets
Where It Is Worn
- Daily wear in professional or social settings where the hairline is seen up close
- Wearers who want a natural-looking front without the stiffness of full mono or skin
- Salons fitting clients who need a ready-to-wear unit with a realistic hairline
- Clients who prefer a lace front for breathability and a soft hairline feel
- Distributors stocking a mid-range lace front option between full skin and mono
Technical Features
- French lace front with bleached knots for a lighter, more natural hairline
- 1 inch PU strip at the back for secure tape or glue attachment
- 6 inch Indian Remy hair with cuticles aligned in one direction
- Medium density at approximately 120% for balanced volume
- 3.0 cm curl and wave setting supplied as standard
- 8 by 10 inch base size with a free-style hairline and parting
Specifications
| Model | French Lace Front With 1" PU Men's Lace Front Wig |
|---|---|
| Base Type | French lace front with 1 inch PU back strip |
| Base Size | 8 x 10 inches |
| Hair Length | 6 inches |
| Hair Texture | Indian Remy hair |
| Density | About 120% |
| Wave and Curl | 3.0 cm |
| Hair Colour | Many colours available including 1B10#, 1B30#, 1B65# |
| Dispatch | Sent within 24 hours if not custom-cut |
| Transit Time | About 5 to 10 days |
| Returns | 30 days on unused uncut un-recoloured units |
| Durability | About 4 to 6 months depending on use and care |
Materials
- French lace front material with bleached knots
- 1 inch PU strip at the back for attachment
- Indian Remy human hair with cuticles aligned
- Transparent base material for the front lace
How It Is Made
- Base is cut to 8 by 10 inch template with French lace front
- 1 inch PU strip is bonded across the back perimeter
- Hair is ventilated into the lace front by hand
- Front knots are bleached to reduce knot visibility
- Hair is set to a 3.0 cm curl and steamed for shape retention
- Unit is washed, dried, and packed for dispatch
Quality Checks Before Dispatch
- Front knots inspected under light after bleaching for even colour
- Base size measured against the 8 by 10 inch spec before packing
- Hair density checked against the 120% target across front, mid, and crown
- Colour matched to the ordered code under daylight before dispatch
Customisation Options
- Base size changed from the stock 8 by 10 inches to your own template
- Hair length adjusted from the stock 6 inches to shorter or longer
- Density lowered or raised from the standard 120%
- Colour selected from the full code range including grey percentage blends
- Curl and wave changed from the standard 3.0 cm
- Base construction switched to full skin, mono, or Swiss lace if breathability or durability is prioritized
How It Compares
| Full thin skin poly system | French lace breathes better and feels softer but may shed knots sooner than skin |
| Full fine welded mono base | Lace front is more flexible and breathable but may not last as long under frequent brushing and washing |
| Full Swiss lace front | French lace is slightly more durable and less prone to fraying than Swiss lace, but Swiss lace is thinner and more seamless |
Use And Care Guide
- Make a template of your scalp before ordering if you are between sizes
- Cut the base back to your template line before the first fitting
- Attach with tape or liquid adhesive on the 1 inch PU strip at the rear
- Have the hair cut in on the head so the front blends with your natural hairline
- Wash with a gentle wig shampoo and avoid alcohol-based products on the knots
- Clean adhesive residue from the PU strip after each removal to maintain bond strength
Questions About This Unit
How long does the lace front last under daily wear?
The lace front can last 4 to 6 months with regular washing and styling. Actual life depends on how often you wash, style, and re-attach the unit.
Is the 8 by 10 inch base size the only option?
8 by 10 inches is the stock size. Send your own template or measurements and the same base construction can be made to your size.
Will the hairline look natural on camera?
The front knots are bleached and the lace is thin, so the hairline reads as scalp in most lighting. A full skin or Swiss lace front is thinner still if undetectability is the top priority.
How fast is dispatch and delivery?
The unit is shipped within 24 hours if not custom-cut. Transit is normally 5 to 10 days depending on destination.
Can I return it if the colour is wrong?
Yes, if the unit has not been used, cut, styled, washed, or recoloured. Once cut or altered, it cannot be returned.
Do you supply salons and distributors?
Yes. Send your base type, size, and colour list on WhatsApp and we will quote the range you want to stock.
What colour codes are available?
The full men's colour range runs from 1# jet black through 613#, including grey blend codes such as 1B10#, 1B30#, and 1B65#.
Ask About French Lace Front With 1 inches PU Mens Lace Front Wigs
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.