LT-IT: Parrucca Uomo Merletto svizzero con NPU Toupee per capelli per uo
LT-IT is a stock men's hair system built on a full Swiss lace base with a 2 inch NPU ring around the perimeter and a double mono net at the front. The Swiss lace base allows airflow across the scalp, which helps reduce heat buildup during daily wear. The NPU ring provides a stable, flat surface for tape or glue attachment at the back, preventing edge lift. The front uses a double mono net with bleached knots to keep the hairline light and natural-looking under direct light. It comes in 5x7 inch, 6x8 inch, 7x9 inch, 7x10 inch, or 8x10 inch base sizes with 6 inch Indian Remy hair at approximately 120% density. The unit ships within 24 hours because it is held in stock and is ready for immediate dispatch.
Key Benefits
- Full Swiss lace base improves breathability compared to sealed skin or mono bases
- NPU ring at the back gives a flat, stable surface for tape or glue attachment
- Double mono net at the front strengthens the hairline and reduces knot visibility
- Bleached front knots help the hairline read as scalp under bright light
- 6 inch Indian Remy hair with cuticle alignment allows for natural parting and styling
- Stock item dispatched within 24 hours instead of waiting on a custom build
Problems It Solves
- Full skin bases that trap heat and feel sealed during extended wear
- Lace perimeters that become loose or lift at the back due to lack of a flat surface
- Visible dark knots at the hairline under bright light or on camera
- Hair systems that require custom build times when a replacement is needed urgently
- Lack of airflow in the base that leads to scalp irritation over time
Who It Is For
- Men with moderate to extensive hair loss who want a breathable, natural-looking hair system
- Wearers who have found full skin bases too hot or uncomfortable during long days
- Hair replacement studios needing a repeatable stock unit with a strong rear attachment
- Barbers who need a system with a stable back edge for secure fitting
- Wholesale buyers looking to stock a base type that offers better breathability than full mono
Where It Is Worn
- Daily wear in warm climates where breathability is needed to avoid scalp discomfort
- Wearers who sweat during the day and need a base that allows airflow
- Salons fitting a client who wants a natural-looking front with a durable back attachment
- Distributors stocking a mid-range base type that balances breathability and durability
- Wearers who frequently re-attach their hair system and need a stable rear bond
Technical Features
- Full Swiss lace base across the entire unit for maximum breathability
- 2 inch NPU ring around the perimeter for stable tape or glue attachment
- Double mono net at the front hairline for added strength and knot concealment
- Front knots bleached to reduce knot visibility at the hairline
- Indian Remy human hair with cuticles aligned in one direction
- 6 inch hair length with approximately 120% density
- 3.0 cm curl and wave setting supplied as standard
Specifications
| Model | LT-IT |
|---|---|
| Base Size | 5 x 7 inches, 6 x 8 inches, 7 x 9 inches, 7 x 10 inches, 8 x 10 inches |
| Hair Length | 6 inches |
| Hair Texture | Indian Remy human hair |
| Density | About 120% |
| Wave and Curl | 3.0 cm |
| Hair Colour | 1B#, 1B10#, 1B20#, 1B30#, 1B40#, 1B50# |
| Dispatch | Sent in 24 hours |
| Transit Time | About 4 to 10 days |
| Returns | 30 days on unused uncut un-recoloured units |
Materials
- Swiss lace base material for breathability
- NPU polyurethane ring around the perimeter
- Double layer of mono net at the front hairline
- Indian Remy human hair with cuticles aligned in one direction
How It Is Made
- Base is cut to the selected size from Swiss lace material
- 2 inch NPU ring is bonded around the perimeter
- Double mono net is applied to the front hairline area
- Hair is hand-ventilated into the base with bleached knots at the front
- Hair is set to a 3.0 cm curl and steamed for shape retention
- Unit is washed, dried, and packed for dispatch
Quality Checks Before Dispatch
- Base size measured against the selected dimension before packing
- NPU ring checked for even bonding and flatness
- Front knots inspected under light after bleaching
- Hair density verified against the 120% target across front, mid, and crown
- Colour matched to the ordered code under daylight before dispatch
Customisation Options
- Base size changed from the stock sizes to your own template
- Hair length adjusted from the stock 6 inches to a custom length
- Density raised or lowered from the standard 120%
- Colour selected from the available codes including 1B#, 1B10#, 1B20#, 1B30#, 1B40#, 1B50#
- Curl and wave changed from the standard 3.0 cm
- Base construction switched to full skin, mono, or lace front if breathability or thinness is a priority
How It Compares
| Full thin skin poly system | LT-IT breathes better and is less likely to trap heat but does not give the same fully seamless scalp look |
| Full fine welded mono base | LT-IT is more breathable but may shed knots sooner at the perimeter under frequent washing and brushing |
| Full French lace system | LT-IT uses Swiss lace which is more durable and less prone to tearing than French lace, but may feel slightly stiffer |
Use And Care Guide
- Make a template of your scalp before ordering if you are between sizes
- Cut the base back to your template line before the first fitting
- Attach with tape or liquid adhesive on the NPU ring at the back
- Have the hair cut in on the head so the front blends with your own hairline
- Wash with a gentle wig shampoo and avoid alcohol-based products on the knots
- Clean adhesive residue from the NPU after each removal to maintain bond strength
Other Units Buyers Compare With This
NCSM: 120% Density 0.04MM Super Thin Skin Wigs For Men Natural Hair Syst
View Details →
Q7-DE: Herren Toupee Human Hair Französisches Spitze mit 1 inches PU Männer Perü
View Details →
QS-IT: Pizzo francese con parrucca da uomo in vero pelo da 2 "in PU per
View Details →
SILIC:Poly Thin Skin Hair System
View Details →
Questions About This Unit
How long does a Swiss lace system last compared with full skin?
Actual life depends on how often you wash, style and re-attach the unit. Swiss lace is more breathable than full skin but may show wear at the perimeter over time with frequent handling.
Is the 8 by 10 inch base size the only option?
No. LT-IT is available in 5x7 inch, 6x8 inch, 7x9 inch, 7x10 inch, and 8x10 inch sizes. Send your template and we can build to your size.
Will the hairline look natural on camera?
The front uses a double mono net with bleached knots, which helps the hairline read as scalp. For a thinner front, a lace front base is more transparent.
How fast is dispatch and delivery?
LT-IT is a stock item and is sent within 24 hours. Transit is typically 4 to 10 days depending on destination.
Can I return it if the colour is wrong?
Yes, if the unit has not been used, cut, recoloured or washed. Once altered, it cannot be returned.
Do you supply salons and distributors?
Yes. Send your base type, size and colour list on WhatsApp and we will quote the range you want to stock.
What colour codes are available?
Available codes include 1B#, 1B10#, 1B20#, 1B30#, 1B40#, 1B50#.
Ask About LT-IT: Parrucca Uomo Merletto svizzero con NPU Toupee per capelli per uo
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.