SILIC:Poly Thin Skin Hair System
SILIC is a pre-sale men's hair system built on a 0.2 mm injected silicon skin base, with a 7 by 9 inch size and 6 inch Indian Remy hair at about 110% density. The transparent skin base is designed to blend with the scalp, offering a seamless look that is hard to detect under normal lighting. The hair is set to a 3.0 cm wave and can be styled freely. It is shipped within 6 to 8 weeks after purchase, not from stock, and is intended for daily wear with a durable construction that resists shedding and tangling. The unit is made with high-quality human hair and a consistent texture similar to European hair.
Key Benefits
- 0.2 mm silicon skin base is transparent and blends with the scalp for a natural, undetectable look
- Indian Remy hair with aligned cuticles resists tangling and shedding during daily wear
- 6 inch length and 110% density allow for versatile styling and parting without exposing the base
- 3.0 cm wave setting provides a natural movement that mimics real hair growth patterns
- Durable injected skin construction holds up through regular wear and reattachment
- No visible base edges or dark knots at the hairline due to the transparent skin and seamless integration
Problems It Solves
- Visible dark knots or lace edges that give away the hairline in bright light or on camera
- Lace or mono bases that shed knots over time, especially at the front hairline
- Full skin bases that feel hot or trap heat due to poor breathability
- Hair that tangles or sheds quickly after washing or styling
- Lack of a ready-to-wear system with a natural, invisible hairline for immediate use
- Clients who have had poor results with lace fronts due to knot shedding or thinning
Who It Is For
- Men with visible hair loss who want a natural-looking, undetectable hair system
- Wearers who value a seamless hairline and dislike the look of lace or mono edges
- Hair replacement studios fitting clients who want a durable, low-shedding unit
- Barbers who need a system that stays in place and doesn't require frequent reattachment
- Wholesale buyers adding a high-invisibility skin base to their product range
Where It Is Worn
- Daily wear in professional or social settings where the hairline is seen up close
- Wearers who want a fully seamless look without visible edges or dark knots
- Men with front to mid-crown hair loss who need a long-term, low-maintenance solution
- Clients who prefer a natural hairline that matches their skin tone under daylight
- Salons fitting clients who want a ready-to-wear system with minimal styling needed after fitting
- Distributors stocking a high-seamlessness option for clients who prioritize invisibility
Technical Features
- 0.2 mm injected silicon skin base with transparent color for seamless scalp blending
- 7 by 9 inch base size with a smooth, flat surface for consistent adhesive bonding
- Indian Remy human hair with cuticles aligned in one direction for reduced tangling
- 6 inch hair length with 110% density for volume and styling flexibility
- 3.0 cm wave and curl setting for natural movement and realistic texture
- Free-style hairline with no fixed parting, allowing for custom styling and parting
- Injected skin construction prevents air pockets and ensures a smooth, flat surface
Specifications
| Model | SILIC |
|---|---|
| Base Type | 0.2 mm injected silicon skin |
| Base Size | 7 x 9 inches |
| Hair Length | 6 inches |
| Hair Texture | Indian Remy hair |
| Density | About 110% |
| Wave and Curl | 3.0 cm |
| Hair Colour | Many colours available including 1# jet black, 1B10#, 1B30#, 1B65#, 613# |
| Hair Style | Free style |
| Durability | About 6 to 12 months |
| Dispatch | Shipped 6 to 8 weeks after purchase |
| Transit Time | Typical 4 to 10 days depending on destination |
| Returns | 30 days on unused, uncut, uncoloured, unwashed units |
Materials
- 0.2 mm injected silicon skin base with transparent finish
- Indian Remy human hair with cuticles aligned in one direction
- High-quality polyurethane-based adhesive layer in the skin base for durability
- Smooth, flat surface on the skin for even adhesive bonding
How It Is Made
- Silicon skin base is injected and cured to a 0.2 mm thickness with transparent finish
- Base is cut to 7 by 9 inch template and smoothed at the edges
- Indian Remy hair is ventilated into the base by hand with consistent knot spacing
- Hair is set to a 3.0 cm wave and steamed to lock the curl
- Unit is washed, dried, and inspected for knot visibility and hair quality
- Final inspection under daylight before packaging and dispatch
Quality Checks Before Dispatch
- Base size measured against 7 x 9 inch spec before packaging
- Skin transparency checked under daylight to ensure no visible discoloration
- Hair density verified across front, mid, and crown areas to match 110% target
- Knots inspected under light for consistency and colour match to the hairline
- Hair texture tested for tangling and shedding after simulated brushing
- Colour matched to the ordered code under natural daylight before dispatch
Customisation Options
- Base size changed from 7 by 9 inches to your own template or measurements
- Hair length adjusted from 5 to 6 inches to your preferred length
- Density raised or lowered from the standard 110% to suit your volume needs
- Hair colour selected from the full range including 1B10#, 1B30#, 1B65#, 613#
- Wave and curl changed from 3.0 cm to a different setting if needed
- Base type switched to lace or mono if breathability or durability is a higher priority
How It Compares
| Full Swiss or French lace hair system | SILIC offers a more seamless look but is less breathable and may feel warmer than lace |
| Full fine welded mono base | SILIC is more invisible at the hairline but may not last as long under frequent washing and restyling |
| Custom made skin unit | SILIC ships in 6 to 8 weeks while a custom build is made to your exact template and colour |
Use And Care Guide
- Make a template of your scalp before ordering if you are between sizes
- Do not cut or style the unit before the first fitting to preserve return eligibility
- Attach with liquid adhesive or tape on the entire skin surface for even bonding
- Style the hair in on the head after fitting to blend the hairline with your natural hair
- Wash with a gentle wig shampoo and avoid alcohol-based products near the base
- Clean adhesive residue from the skin after each removal to maintain bond strength
Other Units Buyers Compare With This
SKIN: Poly Thin Skin Hair Systems For Men
View Details →
STS: 12 inches Human Hair light blonde Super Thin Skin Hair replacement System
View Details →
STYPE-DE: Toupee Human Hair Schweizer Spitze mit PU Basis Haar toupee Haar
View Details →
STYPE-IT: Pizzo Svizzero con PU Hairpiece di Capelli Umani per Uomo
View Details →
Questions About This Unit
How long does the 0.2 mm silicon skin last?
The skin base is durable and can last 6 to 12 months with regular wear, but actual life depends on how often you wash, style, and re-attach the unit.
Is the 7 by 9 inch size the only option?
7 by 9 inches is the stock size. We can adjust the base size to your template or measurements for a custom build.
Will the hairline look natural in bright light?
The transparent skin and bleached knots help the hairline blend with the scalp. For the most invisible result, avoid direct overhead light on the hairline.
How long is the wait for dispatch?
SILIC is a pre-sale unit and ships 6 to 8 weeks after purchase. Custom cuts take 3 to 5 days if requested before shipment.
Can I return it if the colour doesn't match?
Yes, if the unit has not been cut, styled, washed, coloured, or used, you can return it within 30 days.
Do you supply salons and distributors?
Yes. Send your base type, size, and colour list on WhatsApp and we will quote the range you want to stock.
What colour codes are available?
The full men's colour range includes 1# jet black, 1B10#, 1B30#, 1B65#, 613#, and many others from 1# to 8R#.
Ask About SILIC:Poly Thin Skin Hair System
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.