G-NC: 0.06-0.08 MM Thin Skin Human Hair Wholesale Male Hair Pieces
G-NC is a stock men's hair system built on a full 0.06-0.08mm thin skin base with a V-loop front and transparent base material. The unit is 8 by 10 inches and uses 6 inch Indian Remy hair at about 100% light to medium density, with a 3.0 cm wave. The V-loop construction eliminates visible knots at the hairline, which helps the hairline read as natural under close inspection. It ships within 24 hours as a stock item and is designed for wearers who need a seamless, undetectable look without the bulk of a full mono or lace base. The transparent skin blends with the scalp, and the hair is cut and styled to a free-form shape for natural movement.
Key Benefits
- 0.06-0.08mm thin skin base is nearly invisible and blends with the scalp under natural light
- V-loop front construction hides knots completely, so the hairline appears natural
- Transparent base material reduces the contrast between scalp and base
- Indian Remy hair with aligned cuticles resists tangling and shedding
- 6 inch length and 3.0 cm wave allow for natural parting and styling
- Stock unit dispatched within 24 hours, no custom build wait time
Problems It Solves
- Visible knots at the hairline that give away the unit under bright light or camera
- Thick or opaque bases that contrast with the scalp and look artificial
- Lace front units that shed knots over time, especially with frequent washing
- Long wait times for custom builds when a replacement is needed urgently
- Base materials that trap heat and feel heavy during extended wear
Who It Is For
- Men with front to mid-crown hair loss who need a daily wear solution with no visible base
- Wearers who have had lace or mono units fail due to knot visibility or shedding
- Hair replacement studios needing a repeatable stock unit with a seamless front
- Barbers who want to fit a unit with a clean, knot-free hairline without additional prep
- Wholesale buyers building a range of thin skin units for high-end markets
Where It Is Worn
- Daily wear in close-contact environments where the hairline is seen from under 12 inches
- Wearers who want the thinnest possible base for maximum invisibility
- Salons fitting clients who need a ready-to-wear unit with no visible knots
- Trade buyers stocking a high-invisibility base type for walk-in customers
- Wearers who prefer not to use tape or glue on the perimeter and rely on the skin's natural adhesion
Technical Features
- Full 0.06-0.08mm thin skin base across the entire unit
- V-loop front construction with no visible knots at the hairline
- Transparent base material for maximum scalp blending
- 6 inch Indian Remy human hair with cuticles aligned in one direction
- 3.0 cm wave and curl setting supplied as standard
- Light to medium density at approximately 100%
- 8 by 10 inch base size with no perimeter reinforcement
Specifications
| Model | G-NC |
|---|---|
| Base Type | Full 0.06-0.08mm thin skin with V-loop front |
| Base Size | 8 x 10 inches |
| Hair Length | 6 inches |
| Hair Texture | Indian Remy human hair |
| Density | About 100%, light to medium |
| Wave and Curl | 3.0 cm |
| Hair Colour | Many colours available including 1#, 1B10#, 1B30#, 1B65#, 2#, 210#, 220#, 3#, 4#, 4ASH#, 5#, 510#, 520#, 530#, 540#, 6#, 620#, 7#, 720#, 7ASH#, 17#, 1720#, 18#, 20#, 4R#, 6R#, 8R#, 10R#, 22R#, 30R#, 60RY#, 1780# |
| Dispatch | Sent within 24 hours |
| Transit Time | About 4 to 10 days |
| Returns | 30 days on unused uncut un-recoloured units |
| Durability | About 4 to 6 months |
Materials
- 0.06-0.08mm thin skin base material
- Indian Remy human hair with cuticles aligned
- Transparent base colour for scalp blending
- V-loop construction for knot concealment
How It Is Made
- Base is cut to 8 by 10 inch template using precision tools
- V-loop front is hand-woven to eliminate visible knots
- Hair is ventilated into the base using a consistent pattern
- Hair is set to a 3.0 cm wave and steamed for stability
- Unit is washed, dried, and inspected for transparency and knot concealment
- Packed and dispatched within 24 hours if uncut
Quality Checks Before Dispatch
- Base transparency checked under daylight to ensure no visible seams or discoloration
- V-loop front inspected for knot concealment under direct light
- Base size measured against the 8 by 10 inch spec before packing
- Hair density verified against the 100% target across front, mid, and crown
- Colour matched to the ordered code under natural light before dispatch
Customisation Options
- Base size changed from the stock 8 by 10 inches to your own template
- Hair length adjusted longer or shorter than the stock 6 inches
- Density raised or lowered from the standard 100%
- Colour selected from the full code range including 1B10#, 1B30#, 1B65#
- Base construction switched to lace front or mono if breathability or durability is a priority
- Base cut to your template before shipment (note: this prevents return)
How It Compares
| Full fine welded mono base | G-NC is thinner and more invisible but less durable under frequent washing and brushing |
| Full Swiss or French lace front | G-NC has no visible knots and better scalp blending but may feel less breathable and shed more at the perimeter over time |
| Full skin with tape strip | G-NC is lighter and more flexible but lacks a reinforced rear for tape attachment, which may affect re-attachment stability |
Use And Care Guide
- Make a template of your scalp before ordering if you are between sizes
- Do not cut or style the base before the first fitting to preserve return eligibility
- Attach with liquid adhesive or tape on the perimeter, avoiding the V-loop front
- Have the hair cut in on the head to blend the front with your natural hairline
- Wash with a gentle wig shampoo and avoid alcohol-based products near the base
- Clean adhesive residue from the skin after each removal to maintain adhesion
Other Units Buyers Compare With This
Questions About This Unit
How long does the thin skin base last?
The base lasts about 4 to 6 months with regular wear, washing, and re-attachment. Actual life depends on how often you wash, style, and re-attach the unit.
Is the 8 by 10 inch size the only option?
8 by 10 inches is the stock size. You can send your own template and we will build the same V-loop thin skin base to your size.
Will the hairline look natural in bright light?
Yes. The V-loop front and transparent skin work together to hide knots and blend with the scalp. For maximum invisibility, avoid strong overhead lighting during fitting.
How fast is dispatch and delivery?
G-NC is a stock unit and is sent within 24 hours. Transit time is typically 4 to 10 days depending on destination.
Can I return it if I cut the base?
No. If the base is cut before shipment, the unit cannot be returned. Return is only allowed on unused, uncut, un-recoloured units within 30 days.
Do you supply salons and distributors?
Yes. Send your base type, size, and colour list via WhatsApp and we will quote your wholesale range.
What colour codes are available?
The full men's colour range includes 1#, 1A#, 1B#, 1B10#, 1B20#, 1B30#, 1B40#, 1B50#, 1B65#, 1B80#, 2#, 210#, 220#, 3#, 310#, 4#, 410#, 4ASH#, 5#, 510#, 520#, 530#, 540#, 6#, 620#, 7#, 720#, 7ASH#, 17#, 1720#, 18#, 20#, 4R#, 6R#, 8R#, 10R#, 22R#, 30R#, 60RY#, 1780#.
Ask About G-NC: 0.06-0.08 MM Thin Skin Human Hair Wholesale Male Hair Pieces
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.