G-NC: 0.10-0.12 MM Thin Skin Human Hair Mens Hair Pieces
G-NC is a stock men's hair system built on a full 0.10-0.12 mm thin skin base with an all-v-loop construction, featuring a transparent base and no visible knots. The unit measures 8 by 10 inches and uses 6 inch Indian Remy hair at approximately 100% light to medium density, with a 3.0 cm wave. The v-loop front creates a seamless hairline that reads as natural under close inspection, making it difficult to detect the unit is worn. It is dispatched within 24 hours from stock and ships worldwide via TNT, FedEx, UPS or DHL.
Key Benefits
- 0.10-0.12 mm thin skin base is nearly invisible and blends with the scalp under natural light
- All-v-loop construction eliminates visible knots at the hairline for a seamless front
- Transparent base material reduces contrast with the scalp, especially in bright light
- Indian Remy hair with aligned cuticles resists tangling and maintains natural movement
- 6 inch length and 3.0 cm wave allow for versatile styling without exposing the base
- Stock item shipped within 24 hours, ideal for urgent replacements or walk-in fittings
Problems It Solves
- Visible knots or dark lines at the hairline that give away the unit in daylight or on camera
- Thick or opaque bases that contrast with the scalp and look artificial
- Lace or mono systems that shed knots at the perimeter after a few weeks
- Long wait times for custom builds when a replacement is needed immediately
- Clients who have tried other systems and found them too noticeable at the front
Who It Is For
- Men with front to mid-crown hair loss who want a non-surgical, undetectable solution
- Wearers who value a completely seamless hairline and are less concerned about scalp ventilation
- Hair replacement studios fitting clients who need a natural front for photos or video
- Barbers who need a consistent, repeatable stock unit for quick fittings
- Wholesale buyers adding a high-invisibility base type to their product range
Where It Is Worn
- Daily wear in professional or social settings where the hairline is seen up close
- Wearers who want the most natural-looking front with no visible knots or base
- Clients needing a quick replacement after losing a previous unit
- Salons fitting first-time wearers who prioritize invisibility over breathability
- Distributors stocking a high-invisibility base type for clients seeking undetectable results
Technical Features
- Full 0.10-0.12 mm thin skin base with transparent material
- All-v-loop construction across the entire front hairline, no visible knots
- 8 by 10 inch base size with a smooth, flat surface for adhesive bonding
- Indian Remy human hair with cuticles aligned in one direction
- 6 inch hair length with a 3.0 cm wave and curl setting
- Light to medium density at approximately 100%
- No tape or NPU strip at the back; relies on adhesive directly on the skin
Specifications
| Model | G-NC |
|---|---|
| Base Type | Full 0.10-0.12 mm thin skin with all-v-loop front |
| Base Size | 8 x 10 inches |
| Hair Length | 6 inches |
| Hair Texture | Indian Remy hair |
| Density | About 100%, light to medium |
| Wave and Curl | 3.0 cm |
| Hair Colour | Many colours available including 1#, 1A#, 1B#, 1B10#, 1B30#, 1B65#, 1B80#, 2#, 210#, 220#, 3#, 310#, 4#, 410#, 4ASH#, 5#, 510#, 520#, 530#, 540#, 6#, 620#, 7#, 720#, 7ASH#, 17#, 1720#, 18#, 20#, 4R#, 6R#, 8R#, 10R#, 22R#, 30R#, 60RY#, 1780# |
| Durability | About 4 to 6 months |
| Dispatch | Within 24 hours on stock items |
| Transit Time | Typically 4 to 10 days |
| Returns | 30 days on unused, uncut, uncoloured, unwashed units |
Materials
- 0.10-0.12 mm thin polyurethane skin base, transparent
- Indian Remy human hair with cuticles aligned
- All-v-loop knot construction at the front hairline
- No additional backing or netting; base is fully skin-based
How It Is Made
- Base is cut to 8 by 10 inches and prepared with a transparent thin skin layer
- V-loop technique applied to the front hairline to hide knots and create a natural look
- Indian Remy hair is hand-ventilated into the base with consistent density
- Hair is set to a 3.0 cm wave and steamed to hold the curl
- Unit is washed, dried, and inspected for colour and knot quality
- Packed and dispatched within 24 hours if no custom cutting is requested
Quality Checks Before Dispatch
- Base thickness measured to ensure it falls within 0.10-0.12 mm range
- Front hairline inspected under light to confirm no visible knots or gaps
- Hair colour matched to the ordered code under daylight conditions
- Base size verified as 8 by 10 inches before packing
- Density checked across front, mid, and crown areas to match 100% target
Customisation Options
- Base size adjusted from 8 by 10 inches to your own template or measurements
- Hair length changed from 6 inches to a custom length
- Density adjusted from 100% to higher or lower levels
- Hair colour selected from the full range including 1B10#, 1B30#, 1B65#, 1B80#
- Hair texture changed to Mongolian virgin hair if requested
- Base construction switched to lace or mono if breathability or durability is a priority
How It Compares
| Full fine welded mono system | G-NC is more invisible at the hairline but less breathable and may not last as long under frequent washing and styling |
| Full Swiss or French lace front | G-NC has a smoother, more natural front but lace allows better scalp ventilation and is more flexible at the edges |
| Full skin with tape strip | G-NC uses no tape strip and relies on direct adhesive, which can be less secure on oily skin but more seamless in appearance |
Use And Care Guide
- Make a template of your scalp before ordering if you are between sizes
- Do not cut the base before fitting unless you accept no return
- Apply adhesive directly to the skin, not the base, for best hold
- Style the hair in on the head to blend with your natural hairline
- Wash with a gentle wig shampoo and avoid alcohol-based products near the hairline
- Clean adhesive residue from the base after each removal to maintain adhesion
Other Units Buyers Compare With This
G-NCU: 0.02-0.03MM Ultra Thin Skin Hair System Human Hair Toupee for Men
View Details →
G-STS: 0.08-0.10MM Poly Thin Skin Hair System
View Details →
G-STS:0.04-0.06MM Front 1/8 inches V-Loop Super Thin Skin Man Toupee
View Details →
G-STS:0.06-0.08MM Front 1/8 inches V-Loop Full Skin Mens Wigs for Sale
View Details →Questions About This Unit
How long does the thin skin base last?
The unit lasts about 4 to 6 months under normal use. Actual life depends on how often you wash, style, and re-attach it.
Is the 8 by 10 inch size the only option?
8 by 10 inches is the stock size. We can adjust the base size to your template or measurements if you request it before shipping.
Will the hairline look natural on camera?
Yes. The all-v-loop front and transparent base make the hairline appear seamless, even in close-up video or photos.
How fast is dispatch and delivery?
Stock units are dispatched within 24 hours. Transit time is typically 4 to 10 days depending on destination and carrier.
Can I return it if the colour is wrong?
Yes, if the unit has not been cut, styled, washed, coloured, or used. Return within 30 days for a full refund.
Do you supply salons and distributors?
Yes. Send your base type, size, and colour list via WhatsApp and we will provide a wholesale quote.
What colour codes are available?
The full range includes 1#, 1A#, 1B#, 1B10#, 1B30#, 1B65#, 1B80#, 2#, 210#, 220#, 3#, 310#, 4#, 410#, 4ASH#, 5#, 510#, 520#, 530#, 540#, 6#, 620#, 7#, 720#, 7ASH#, 17#, 1720#, 18#, 20#, 4R#, 6R#, 8R#, 10R#, 22R#, 30R#, 60RY#, 1780#.
Ask About G-NC: 0.10-0.12 MM Thin Skin Human Hair Mens Hair Pieces
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.