Apex: Hair System For Men Near Me
Apex is a stock men's hair system built on a full fine welded mono base with a 2 inch NPU strip across the back and a double mono net at the front. The welded mono construction holds knots longer than lace under daily wear and restyling, reducing the need for frequent replacements. Front knots are bleached to reduce visibility at the hairline, helping the parting read as scalp rather than base material. It ships in 8 by 10 inch base size with 6 inch Indian Remy hair at roughly 110% density and leaves the workshop within 24 hours because it is held in stock.
Key Benefits
- Fine welded mono base resists knot loss better than lace under daily wear and restyling
- Bleached front knots keep the hairline reading as scalp under direct light
- NPU back strip gives tape a smooth flat surface so the rear edge stays down
- Breathable base surface reduces trapped heat compared with a full skin unit
- Stock item dispatched within 24 hours instead of waiting on a custom build
- 6 inch hair at 110% density can be cut and parted several ways without exposing base
Problems It Solves
- Lace perimeters that shed knots and thin out at the front within a few months
- Full skin bases that seal the scalp and feel hot through a working day
- Visible dark knots that give away the hairline in bright light or on camera
- Rear tape edges lifting because there is no smooth surface to bond to
- Long custom lead times when a wearer needs a replacement unit now
Who It Is For
- Men with front to mid crown hair loss who want a non-surgical everyday solution
- Wearers who have shortened the life of lace units by brushing and washing
- Hair replacement studios that need a repeatable stock unit for walk-in fittings
- Barbers cutting the system in on the client after fitting
- Wholesale buyers building a starter range across base types
Where It Is Worn
- Daily office and client-facing wear where the hairline is seen close up
- Active wearers who sweat and need a base that is not fully sealed skin
- Salons fitting a first-time client who needs a durable unit rather than the thinnest one
- Wearers who restyle and re-part their hair frequently through the week
- Distributors stocking a mid-durability base type between lace and full skin
Technical Features
- Full fine welded mono base across the whole unit, not only the crown
- 2 inch NPU strip at the back for tape or glue attachment
- Double mono net at the front for hairline strength
- Front bleached knots for a lighter knot appearance at the hairline
- Indian Remy hair with cuticles aligned in one direction
- 3.0 cm curl and wave setting supplied as standard
Specifications
| Model | Apex |
|---|---|
| Base Type | Full fine welded mono with 2 inch NPU back and double mono net front |
| Base Size | 8 x 10 inches |
| Hair Length | 6 inches |
| Hair Texture | Indian Remy hair |
| Density | About 110% |
| Wave and Curl | 3.0 cm |
| Hair Colour | Many colours available including grey blend codes |
| Dispatch | Sent in 24 hours |
| Transit Time | About 5 to 10 days |
| Returns | 30 days on unused uncut un-recoloured units |
Materials
- Indian Remy human hair, cuticle aligned
- Fine welded monofilament base material
- NPU polyurethane strip at the rear perimeter
- Mono net used in a double layer at the front hairline
How It Is Made
- Base is cut and welded to the 8 by 10 inch template
- NPU strip is bonded across the 2 inch rear section
- Hair is ventilated into the mono base by hand
- Front knots are bleached to lighten them at the hairline
- Hair is set to a 3.0 cm curl and steamed
- Unit is washed, dried and packed for dispatch
Quality Checks Before Dispatch
- Density checked against the 110% target across front mid and crown
- Hairline knots inspected under light after bleaching
- Base size measured against the 8 by 10 inch spec before packing
- Colour matched to the ordered code under daylight before dispatch
Customisation Options
- Base size changed from the stock 8 by 10 inches to your template
- Hair length ordered longer or shorter than the stock 6 inches
- Density raised or lowered from the standard 110%
- Colour selected from the full code range including grey percentage blends
- Curl and wave changed from the standard 3.0 cm
- Base construction switched to lace front or full skin if breathability or thinness matters more
How It Compares
| Full Swiss or French lace hair system | Apex lasts longer under daily wear but is slightly stiffer and less breathable than full lace |
| Full thin skin poly system | Apex breathes better and holds knots longer but does not give the same fully seamless scalp look |
| Custom made mono unit | Apex ships in 24 hours from stock while a custom build is made to your own template and colour |
Use And Care Guide
- Make a template of your own scalp before ordering if you are between sizes
- Cut the base back to your template line before the first fitting
- Attach with tape or liquid adhesive on the NPU strip at the rear
- Have the hair cut in on the head so the front blends with your own hairline
- Wash with a gentle wig shampoo and avoid alcohol based products on the knots
- Clean adhesive residue from the NPU after each removal to keep the bond strong
Other Units Buyers Compare With This
Arcadia-IT: Sostituzione durable dei capelli del parrucchino degli uomi
View Details →
B-SFF: Natural Hairline French Lace Hair Replacement Systems for Men
View Details →
B-SFFM: 120% Density Full French Lace Mens Toupee Human Hair
View Details →
BY-Q7: Real Hair French lace with 1 inches PU Toupee Mens Lace Front Hair Repl
View Details →Read Before You Order
Questions About This Unit
How long does a fine welded mono system last compared with lace?
Welded mono holds knots better than lace under brushing and washing, which is why it is chosen for long-term daily wear. Actual life depends on how often you wash, style and re-attach it.
Is the 8 by 10 inch base size the only option?
8 by 10 inches is the stock size for Apex. Send us your own template or measurements and the same base construction can be made to your size.
Will the hairline look natural on camera?
The front knots are bleached and the front uses a double mono net, so the knots read lighter at the hairline. A full skin or lace front base is thinner still if an undetectable front is your first priority.
How fast is dispatch and delivery?
Apex is a stock unit and is sent within 24 hours. Transit is normally about 5 to 10 days depending on destination.
Can I return it if the colour is wrong?
There is a 30 day return window on units that have not been used, cut or re-coloured. Once a unit is cut in or recoloured it can no longer be returned.
Do you supply salons and distributors?
Yes. Send your base type, size and colour list on WhatsApp and we will quote the range you want to stock.
What colour codes are available?
The full men's colour range runs from 1# jet black through light browns and 613#, including grey blend codes such as 1B10#, 1B30# and 1B65#.
Ask About Apex: Hair System For Men Near Me
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.