Arcadia-IT: Sostituzione durable dei capelli del parrucchino degli uomi
Arcadia-IT is a stock men's hair system built on a hybrid base combining fine welded mono with a front lace front and a rear NPU strip. The base size is available in 6 by 8 inches, 7 by 9 inches, 7 by 10 inches, or 8 by 10 inches. It uses 6 inch Indian Remy human hair at approximately 140% to 150% density, with a 3.0 cm wave setting. The front features a bleached lace front for a natural hairline, and the unit is dispatched within 24 hours if uncut and in stock. The hybrid construction balances durability and a natural appearance, making it suitable for daily wear.
Key Benefits
- Hybrid mono + skin front base resists knot loss better than lace while keeping the hairline natural under close inspection
- Front bleached knots reduce knot visibility at the hairline, especially in bright light or on camera
- NPU strip at the back provides a smooth, flat surface for tape or glue attachment, reducing rear edge lifting
- Indian Remy hair with aligned cuticles maintains natural movement and reduces tangling
- Stock item shipped within 24 hours, avoiding custom build delays
- High density of 140% to 150% gives a full, voluminous look that lasts through daily styling
Problems It Solves
- Lace fronts that shed knots and thin out at the hairline after a few months of wear
- Full skin bases that seal the scalp and trap heat during long days
- Visible dark knots at the front that give away the hairline under direct light
- Rear tape edges lifting due to uneven or textured base surfaces
- Long wait times for custom units when a replacement is needed immediately
Who It Is For
- Men with front to mid-crown hair loss seeking a long-lasting, low-maintenance solution
- Wearers who have experienced lace front shedding or knot thinning after a few months
- Hair replacement studios needing a reliable stock unit for walk-in fittings
- Barbers who cut the hair in on the head after fitting to blend with the natural hairline
- Wholesale buyers building a range with a balance of durability and natural appearance
Where It Is Worn
- Daily wear in professional or social settings where the hairline is seen up close
- Wearers who restyle their hair frequently and need a unit that holds up to brushing and re-parting
- Salons fitting clients who want a durable, repeatable stock unit with a natural front
- Distributors stocking a mid-to-high durability base type that balances breathability and longevity
- Clients who need a replacement unit quickly and don't want to wait for a custom build
Technical Features
- Hybrid base: fine welded mono across the crown and back, front lace front with bleached knots
- 2 inch NPU strip at the rear perimeter for secure tape or glue attachment
- Front bleached lace for a lighter knot appearance at the hairline
- Indian Remy human hair with cuticles aligned in one direction
- 3.0 cm wave setting supplied as standard
- Base sizes available in 6x8, 7x9, 7x10, and 8x10 inches
- Density between 140% and 150% for a full, natural look
Specifications
| Model | Arcadia-IT |
|---|---|
| Base Type | Fine welded mono with front bleached lace and rear NPU strip |
| Base Size | 6 x 8 inches, 7 x 9 inches, 7 x 10 inches, 8 x 10 inches |
| Hair Length | 6 inches |
| Hair Texture | Indian Remy human hair |
| Density | Approximately 140% to 150% |
| Wave and Curl | 3.0 cm |
| Hair Colour | 1B |
| Dispatch | Within 24 hours on stock items |
| Transit Time | About 4 to 10 days depending on carrier |
| Returns | 30 days on unused, uncut, un-recoloured units |
Materials
- Indian Remy human hair, cuticle aligned
- Fine welded monofilament base material
- Bleached lace front for natural hairline
- NPU polyurethane strip at the rear perimeter
- Transparent base material for the front section
How It Is Made
- Base is cut to the selected size (6x8, 7x9, 7x10, or 8x10 inches)
- Fine welded mono is applied across the crown and back
- Front lace section is attached and bleached for knot lightening
- NPU strip is bonded across the 2 inch rear perimeter
- Indian Remy hair is ventilated into the base by hand
- Hair is set to a 3.0 cm wave and steamed for stability
- Unit is washed, dried, and inspected before packing
Quality Checks Before Dispatch
- Density verified across front, mid, and crown areas to match 140% to 150% target
- Front knots inspected under light after bleaching for even colour
- Base size measured against the selected template before packing
- Hair colour matched to code 1B under daylight before dispatch
Customisation Options
- Base size changed from stock options to your own template
- Hair length adjusted from the stock 6 inches to a shorter or longer length
- Density lowered or raised from the standard 140% to 150%
- Colour selected from the full range including grey blend codes such as 1B10#, 1B30#, 1B65#
- Curl and wave changed from the standard 3.0 cm
- Base construction switched to full lace, full skin, or mono-only if breathability or thinness is prioritized
How It Compares
| Full Swiss or French lace hair system | Arcadia-IT lasts longer under daily wear but is less breathable than full lace |
| Full thin skin poly system | Arcadia-IT breathes better and holds knots longer but does not give the same fully seamless scalp look |
| Custom made mono unit | Arcadia-IT ships in 24 hours from stock while a custom build is made to your own template and colour |
Use And Care Guide
- Make a template of your own scalp before ordering if you are between sizes
- Cut the base back to your template line before the first fitting
- Attach with tape or liquid adhesive on the NPU strip at the rear
- Have the hair cut in on the head so the front blends with your own hairline
- Wash with a gentle wig shampoo and avoid alcohol-based products on the knots
- Clean adhesive residue from the NPU after each removal to keep the bond strong
Other Units Buyers Compare With This
B-SFF: Natural Hairline French Lace Hair Replacement Systems for Men
View Details →
B-SFFM: 120% Density Full French Lace Mens Toupee Human Hair
View Details →
BY-Q7: Real Hair French lace with 1 inches PU Toupee Mens Lace Front Hair Repl
View Details →
C-LT: Swiss Lace Top with NPU Human Hair Mens Toupee Wigs
View Details →Read Before You Order
Questions About This Unit
How long does a hybrid mono-skin system last compared with lace?
The welded mono base holds knots better than lace under brushing and washing, which extends the unit's life. Actual duration depends on how often you wash, style, and re-attach it.
Are the base sizes fixed at the stock options?
The stock sizes are 6x8, 7x9, 7x10, and 8x10 inches. You can send your own template or measurements for a custom size.
Will the hairline look natural on camera?
The front uses a bleached lace front with a double layer, so the knots read lighter. A full skin or lace front base is thinner still if an undetectable front is your priority.
How fast is dispatch and delivery?
Arcadia-IT is a stock unit and is sent within 24 hours. Transit is normally 4 to 10 days depending on destination and carrier.
Can I return it if the colour is wrong?
Yes, if the unit has not been used, cut, recoloured, or washed. Once altered, it cannot be returned.
Do you supply salons and distributors?
Yes. Send your base type, size, and colour list on WhatsApp and we will quote the range you want to stock.
What colour codes are available?
The full men's colour range runs from 1# jet black through light browns and 613#, including grey blend codes such as 1B10#, 1B30#, and 1B65#.
Ask About Arcadia-IT: Sostituzione durable dei capelli del parrucchino degli uomi
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.