G-STS:0.10-0.12MM Front 1/8 inches V-Loop Full Skin Mens Male Wigs Online
G-STS:0.10-0.12MM Front 1/8 inches V-Loop Full Skin Mens Male Wigs Online is a stock men's hair system built on a full thin skin base, 8 by 10 inches in size, with 6 inch Indian Remy hair at about 100% light to medium density. The front uses a 1/8 inch V-loop for a seamless hairline, while the rest of the perimeter has tiny knots. This construction allows the front to blend naturally with the scalp under close inspection, while the knot-backed rear adds durability compared to fully V-looped skin units. It ships within 24 hours on stock and is dispatched via TNT, FedEx, UPS or DHL.
Key Benefits
- Full thin skin base (0.10-0.12mm) gives a nearly invisible scalp look under normal lighting
- Front 1/8 inch V-loop creates a natural, undetectable hairline at the front
- Knots on the back perimeter increase durability compared to fully V-looped skin units
- Indian Remy hair with aligned cuticles resists tangling and maintains texture
- 6 inch length at 100% density allows for versatile styling without exposing the base
- Stock item dispatched within 24 hours, no custom build delay
Problems It Solves
- Visible dark knots at the hairline that give away the base in bright light
- Lace fronts that shed knots and thin out after a few weeks of wear
- Full skin units that feel hot and sealed due to lack of breathability
- V-loop-only skin wigs that wear out at the back after repeated use
- Long wait times for custom units when a replacement is needed urgently
Who It Is For
- Men with front to mid-crown hair loss seeking a non-surgical, everyday solution
- Wearers who value a thin, invisible base but have had issues with lace shedding
- Hair replacement studios needing a repeatable stock unit with a natural front
- Barbers fitting a client quickly with a pre-made unit that holds its shape
- Wholesale buyers building a range of skin-based units with varying thicknesses
Where It Is Worn
- Daily wear in office or social settings where the hairline is seen up close
- Wearers who want the thinnest possible base for a seamless look but still need durability
- Salons fitting clients who need a ready-to-wear unit with a natural front
- Clients who prefer a clean, undetectable front but don't want a lace front that sheds
- Distributors stocking a high-seamless base type with better longevity than full V-loop
Technical Features
- Full thin skin base with thickness between 0.10 and 0.12 mm
- 8 by 10 inch base size, can be cut to custom template before shipping
- Front hairline uses 1/8 inch V-loop for a natural, invisible transition
- Rest of the perimeter uses tiny knots for added durability
- Indian Remy human hair with cuticles aligned in one direction
- 6 inch hair length with 3.0 cm curl and wave setting
- Light to medium density, approximately 100%
- Free style hair shape, no fixed parting or pattern
Specifications
| Model | G-STS:0.10-0.12MM Front 1/8 inches V-Loop Full Skin |
|---|---|
| Base Type | Full thin skin (0.10-0.12mm) |
| Base Size | 8 x 10 inches |
| Hair Length | 6 inches |
| Hair Texture | Indian Remy human hair |
| Density | About 100%, light to medium |
| Wave and Curl | 3.0 cm |
| Hair Colour | Many colours available including 1#, 1A#, 1B#, 1B10#, 1B30#, 1B65#, 2#, 210#, 220#, 3#, 310#, 320#, 4#, 410#, 4ASH#, 5#, 510#, 520#, 6#, 610#, 613#, 7#, 720#, 18#, 4R#, 5R#, 6R#, 8R#, 10R#, 22R#, 30R# |
| Durability | About 4 to 6 months |
| Dispatch | Sent within 24 hours on stock |
| Transit Time | About 4 to 10 days |
| Returns | 30 days on unused, uncut, uncoloured, unwashed units |
Materials
- Thin skin base material (0.10-0.12mm thickness)
- Indian Remy human hair with cuticles aligned
- Knots used on the back perimeter for durability
- V-loop construction at the front hairline for natural appearance
How It Is Made
- Base is cut to the 8 by 10 inch template from a thin skin sheet
- Front hairline is shaped into a 1/8 inch V-loop by hand
- Hair is ventilated into the base with tiny knots around the perimeter
- Indian Remy hair is set to a 3.0 cm curl and steamed for consistency
- Unit is washed, dried, and inspected before packing
- Shipped within 24 hours if no custom cutting is requested
Quality Checks Before Dispatch
- Base thickness measured to ensure it falls within 0.10-0.12mm range
- Front V-loop inspected for evenness and natural hairline appearance
- Hair density checked against the 100% target across front, mid, and crown
- Colour matched to the ordered code under daylight before dispatch
- Base size verified as 8 x 10 inches before packing
Customisation Options
- Base size can be cut to your own template before shipment
- Hair length can be adjusted from the stock 6 inches
- Density can be adjusted from the standard 100%
- Hair colour selected from the full code range including grey blend codes
- Hair texture remains Indian Remy unless otherwise specified
- Base type can be changed to lace or mono if breathability or durability is a priority
How It Compares
| Full Swiss or French lace front | G-STS has a thinner, more seamless front but breathes less and may feel warmer than lace |
| Full fine welded mono | G-STS is thinner and more invisible but sheds knots faster than welded mono under frequent washing |
| Other full skin units with 0.04-0.08mm thickness | G-STS is thicker and more durable than ultra-thin skin, but slightly less invisible at the hairline |
Use And Care Guide
- Make a template of your scalp before ordering if you are between sizes
- Cut the base to your template line before the first fitting if needed
- Attach with tape or liquid adhesive on the back perimeter where knots are
- Have the hair cut in on the head so the front blends with your natural hairline
- Wash with a gentle wig shampoo and avoid alcohol-based products on the knots
- Clean adhesive residue from the base after each removal to maintain bond strength
Other Units Buyers Compare With This
HairNotion Durable Swiss Lace Top With Skin Male Wigs #1b50
View Details →
LS: Stock Lace front Skin Hair System Natural Hairline Toupee Hair Piece
View Details →
LT-IT: Parrucca Uomo Merletto svizzero con NPU Toupee per capelli per uo
View Details →
NCSM: 120% Density 0.04MM Super Thin Skin Wigs For Men Natural Hair Syst
View Details →
Questions About This Unit
How long does a thin skin unit last compared to lace or mono?
G-STS lasts about 4 to 6 months under regular use. Actual life depends on how often you wash, style, and re-attach it.
Is the 8 by 10 inch base size the only option?
8 by 10 inches is the stock size. We can cut it to your template before shipping, but custom cutting adds 3 to 5 days to dispatch.
Will the hairline look natural on camera?
Yes. The 1/8 inch V-loop front creates a natural hairline. For the most undetectable result, full skin is thinner than lace but less breathable.
How fast is dispatch and delivery?
Stock units are sent within 24 hours. Transit time is typically 4 to 10 days depending on destination.
Can I return it if the colour is wrong?
Yes, if the unit has not been cut, styled, washed, recoloured, or used. Once altered, it cannot be returned.
Do you supply salons and distributors?
Yes. Send your base type, size, and colour list via WhatsApp and we will quote your range for stock.
What colour codes are available?
The full men's colour range includes 1#, 1A#, 1B#, 1B10#, 1B30#, 1B65#, 2#, 210#, 220#, 3#, 310#, 320#, 4#, 410#, 4ASH#, 5#, 510#, 520#, 6#, 610#, 613#, 7#, 720#, 18#, 4R#, 5R#, 6R#, 8R#, 10R#, 22R#, 30R#.
Ask About G-STS:0.10-0.12MM Front 1/8 inches V-Loop Full Skin Mens Male Wigs Online
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.