DMS: Scalloped Front Skin Mono Top Durable Hair Systems For Men
DMS is a stock men's hair system built on a mono top with a 0.10mm clear poly front, featuring a scalloped hairline and a full fine welded mono base. The 8 by 10 inch base is designed for durability and a natural-looking hairline, with Indian Remy hair at 6 inches and a medium density of about 120%. The front uses a clear poly layer that blends with the scalp, while the sides and back are reinforced with a fine welded mono base. It ships within 24 hours if uncut, and is ready for tape or adhesive attachment along the perimeter. The unit is intended for daily wear and repeated styling without early knot loss.
Key Benefits
- Scalloped front with 0.10mm clear poly gives a natural hairline that blends with the scalp
- Fine welded mono base holds knots longer than lace under daily wear and restyling
- Clear poly front allows for tape or adhesive use on the front and sides without visible edges
- 6 inch Indian Remy hair with 3.0 cm wave can be styled in multiple ways without exposing base
- Medium density of about 120% provides fullness without bulk, suitable for everyday wear
- Stock item dispatched within 24 hours, no custom wait time if uncut
Problems It Solves
- Lace fronts that shed knots and thin out at the hairline after a few weeks of wear
- Full skin bases that seal the scalp and feel hot during long days
- Visible dark knots or edges at the hairline under direct light or on camera
- Fronts that fail when tape is applied due to thin or weak base material
- Long wait times for custom units when a replacement is needed urgently
Who It Is For
- Men with front to mid crown hair loss who need a durable, natural-looking everyday solution
- Wearers who use tape or adhesive on the front and sides and want a base that supports it
- Hair replacement studios that need a consistent stock unit for walk-in fittings
- Barbers who cut the hair in on the head after fitting to blend with the natural hairline
- Wholesale buyers building a range of durable, mid-tier base types for resale
Where It Is Worn
- Daily wear in professional or social settings where the hairline is seen up close
- Wearers who use tape or adhesive on the front and sides and need a secure, invisible attachment
- Salons fitting a client who needs a durable, repeatable unit with a natural front
- Distributors stocking a mid-durability base type that balances breathability and longevity
- Wearers who restyle and re-part their hair frequently and want a unit that resists shedding
Technical Features
- Mono top with 0.10mm clear poly front and scalloped hairline for natural appearance
- Full fine welded mono base across the crown and sides for knot durability
- 8 by 10 inch base size with option to cut to custom template before shipment
- 6 inch Indian Remy hair with cuticles aligned in one direction
- Medium density of about 120% for balanced fullness and weight
- 3.0 cm wave and curl setting supplied as standard
- Front knots are not bleached but the clear poly front reduces knot visibility
Specifications
| Model | DMS Scalloped Front Skin Mono Top |
|---|---|
| Base Type | Mono top with 0.10mm clear poly front and fine welded mono base |
| Base Size | 8 x 10 inches (can be cut to your template before shipping) |
| Hair Length | 6 inches |
| Hair Texture | Indian Remy hair, similar European texture |
| Density | About 120%, medium density |
| Wave and Curl | 3.0 cm |
| Hair Colour | Many colours available including 1#, 1A#, 1B#, 2#, 3#, 4#, 5#, 6#, 7# |
| Front Design | Scalloped clear poly with natural hairline |
| Attachment | Tape or adhesive on front and sides |
| Useful Life | About 6 to 12 months |
| Dispatch | Within 24 hours if uncut |
| Transit Time | About 4 to 10 days depending on destination |
| Returns | 30 days on unused, uncut, un-styled, un-washed, un-recoloured units |
Materials
- 0.10mm clear poly for the front scalloped hairline
- Fine welded monofilament base material across the crown and sides
- Indian Remy human hair with cuticles aligned in one direction
- NPU or similar adhesive-friendly material used in the perimeter for tape attachment
How It Is Made
- Base is cut to 8 by 10 inch template and welded with fine mono material
- 0.10mm clear poly is applied to the front with a scalloped edge for natural hairline
- Hair is ventilated into the mono base by hand, with knots placed at the front
- Hair is set to a 3.0 cm wave and steamed for stability
- Unit is washed, dried, and inspected before packing
- If cut to size, the base is trimmed to the customer's template before dispatch
Quality Checks Before Dispatch
- Front scalloped edge inspected for evenness and natural shape
- Clear poly front checked for transparency and absence of bubbles or marks
- Density verified against the 120% target across front, mid, and crown
- Hairline knots inspected under light for consistency and visibility
- Base size measured against the 8 by 10 inch spec before packing
- Colour matched to the ordered code under daylight before dispatch
Customisation Options
- Base size changed from 8 by 10 inches to your own template before shipping
- Hair length adjusted from 6 inches to a different length
- Density raised or lowered from the standard 120%
- Hair colour selected from the available range including 1#, 1A#, 1B#, 2#, 3#, 4#, 5#, 6#, 7#
- Wave and curl changed from the standard 3.0 cm
- Base type changed to full lace, full skin, or hybrid if breathability or thinness is prioritized
How It Compares
| Full Swiss or French lace front system | DMS lasts longer under daily wear but is less breathable than full lace |
| Full thin skin poly system | DMS breathes better and holds knots longer but does not give the same fully seamless look |
| Custom made mono unit | DMS ships in 24 hours from stock while a custom build is made to your template and colour |
Use And Care Guide
- Make a template of your scalp before ordering if you are between sizes
- Cut the base to your template line before the first fitting if needed
- Attach with tape or liquid adhesive on the front and sides using the clear poly layer
- Have the hair cut in on the head to blend with your natural hairline
- Wash with a gentle wig shampoo and avoid alcohol-based products on the knots
- Clean adhesive residue from the perimeter after each removal to maintain bond strength
Related Units
Other Units Buyers Compare With This
E-AMP: Mono with 1 inches PU Mens Hair System Hair Piece Toupee for Men
View Details →
E-AN: Lace Front Mono with PU Mens Lace Front Hair System Hair Piece Tou
View Details →
E-SKY: Durable Natural Lace front Mono Mens Hair Toupee Lace Hair System
View Details →
E-TW: Lace front Mono Hair System Durable Men's Lace Hair Pieces Invisib
View Details →Guides
Read Before You Order
FAQ
Questions About This Unit
How long does the DMS hair system last?
The useful life is about 6 to 12 months, depending on how often you wash, style, and re-attach the unit.
Is the 8 by 10 inch base size the only option?
8 by 10 inches is the stock size. We can cut the base to your template before shipping if you provide measurements.
Will the hairline look natural on camera?
The scalloped clear poly front blends with the scalp and reduces knot visibility. A full skin or lace front is thinner still if undetectable is the goal.
How fast is dispatch and delivery?
If uncut, the unit is dispatched within 24 hours. Transit is typically 4 to 10 days depending on destination.
Can I return it if the colour is wrong?
Yes, if the unit has not been used, cut, styled, washed, or recoloured. Return within 30 days.
Do you supply salons and distributors?
Yes. Send your base type, size, and colour list via WhatsApp and we will quote the range you want to stock.
What colour codes are available?
Available colours include 1#, 1A#, 1B#, 2#, 3#, 4#, 5#, 6#, 7# - a full range of standard men's shades.
Ask About DMS: Scalloped Front Skin Mono Top Durable Hair Systems For Men
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.