E-AN: Lace Front Mono with PU Mens Lace Front Hair System Hair Piece Tou
E-AN is a stock men's hair system built on a lace front mono base with a clear poly edge and a PU strip at the back. The front uses natural bleached knots to reduce visibility at the hairline, while the mono base provides strength and durability. It comes in multiple base sizes including 8 by 10 inches, with 6 inch Indian Remy hair at medium density (110%-120%) and a 3.0 cm wave. The unit is dispatched within 24 hours if uncut and unstyled, and ships via TNT, FedEx, UPS or DHL.
Key Benefits
- Lace front with bleached knots gives a natural hairline that blends well in daylight and under camera light
- Fine mono base around clear poly resists knot shedding better than lace alone
- PU strip at the back provides a smooth, flat surface for tape or glue attachment
- Indian Remy hair with aligned cuticles holds style and resists tangling
- Stock item shipped within 24 hours without custom build delays
- Medium density at 110%-120% offers fullness without looking overly thick
Problems It Solves
- Lace front edges that shed knots and thin out at the hairline after a few washes
- Full skin bases that trap heat and feel sealed during long wear
- Visible dark knots at the hairline under bright light or on camera
- Rear tape edges lifting due to uneven or rough base surface
- Long wait times for custom builds when a replacement is needed urgently
Who It Is For
- Men with front to mid crown hair loss seeking a non-surgical daily solution
- Wearers who have experienced lace shedding at the front after a few months
- Hair replacement studios needing a repeatable stock unit for walk-in fittings
- Barbers who need a base that holds up to cutting and styling on the head
- Wholesale buyers building a starter range across base types and sizes
Where It Is Worn
- Daily wear in office or social settings where the hairline is seen from close range
- Wearers who need a durable unit that can be washed and restyled multiple times
- Salons fitting clients who want a natural front with a base that holds up over time
- Barbers cutting the system in on the head after fitting for a seamless blend
- Distributors stocking a mid-durability hybrid base between lace and full skin
Technical Features
- Lace front with natural bleached knots for a lighter, more invisible hairline
- Fine mono base around clear poly across the crown and sides
- PU strip at the back perimeter for stable tape or glue attachment
- Indian Remy human hair with cuticles aligned in one direction
- 3.0 cm wave and curl setting supplied as standard
- Medium density between 110% and 120% for balanced fullness
Specifications
| Model | E-AN |
|---|---|
| Base Type | Lace front mono with clear poly edge and PU back strip |
| Base Size | 4 x 7 inches, 4.5 x 8 inches, 5 x 7 inches, 5 x 8 inches, 6 x 8 inches, 6 x 9 inches, 7 x 9 inches, 7 x 10 inches, 8 x 10 inches, 15 x 24 cm |
| Hair Length | 6 inches |
| Hair Texture | Indian Remy hair |
| Density | About 110% to 120% |
| Wave and Curl | 3.0 cm |
| Hair Colour | 1A#, 1B#, 3# (only 8 x 10 inch has other colours) |
| Durability | About 6 to 12 months |
| Dispatch | Sent within 24 hours if uncut |
| Transit Time | Typically 4 to 10 days |
| Returns | 30 days on unused, uncut, uncoloured units |
Materials
- Indian Remy human hair, cuticle aligned
- Fine mono base with clear poly edge
- Lace front with natural bleached knots
- PU (polyurethane) strip at the back perimeter
How It Is Made
- Base is cut to the selected size from the available templates
- Lace front is prepared with bleached knots for a natural hairline
- Fine mono base is attached around the lace edge and secured
- PU strip is bonded across the back perimeter for tape attachment
- Indian Remy hair is ventilated into the base by hand
- Hair is set to a 3.0 cm wave and steamed for stability
- Unit is washed, dried, and inspected before packing
Quality Checks Before Dispatch
- Density checked against the 110% to 120% range across front, mid, and crown
- Hairline knots inspected under light after bleaching for even colour
- Base size measured against the selected template before packing
- Hair colour matched to the ordered code under daylight before dispatch
Customisation Options
- Base size changed from stock sizes to your own template
- Hair length adjusted from the stock 6 inches to longer or shorter
- Density raised or lowered from the standard 110%-120%
- Colour selected from the full code range including 1A#, 1B#, 3#
- Curl and wave changed from the standard 3.0 cm
- Base construction switched to full skin or lace front if breathability or thinness is prioritized
How It Compares
| Full lace front system | E-AN lasts longer under washing and brushing but sheds knots sooner than a full lace front |
| Full thin skin poly system | E-AN breathes better and holds knots longer but does not give the same fully seamless scalp look |
| Full fine welded mono system | E-AN has a more natural hairline but is less durable at the perimeter than a full welded mono base |
Use And Care Guide
- Make a template of your scalp before ordering if you are between sizes
- Cut the base back to your template line before the first fitting
- Attach with tape or liquid adhesive on the PU strip at the rear
- Have the hair cut in on the head so the front blends with your own hairline
- Wash with a gentle wig shampoo and avoid alcohol-based products on the knots
- Clean adhesive residue from the PU strip after each removal to maintain bond strength
Related Units
Other Units Buyers Compare With This
E-SKY: Durable Natural Lace front Mono Mens Hair Toupee Lace Hair System
View Details →
E-TW: Lace front Mono Hair System Durable Men's Lace Hair Pieces Invisib
View Details →
F-ASM: 8x10 Inches Men's Toupee Durable Mono Hair System
View Details →
F-Arcadia: Stock Durable Real Human hair Men Toupee Hair Replacements #1
View Details →Guides
Read Before You Order
FAQ
Questions About This Unit
How long does a lace front mono with PU system last?
With regular washing and styling, the unit lasts about 6 to 12 months. Actual life depends on how often you wash, style, and re-attach it.
Are all base sizes available in every colour?
Only the 8 by 10 inch size is available in all colours. Other sizes are limited to 1A#, 1B#, and 3#.
Will the hairline look natural on camera?
Yes, the front uses bleached knots and a lace front with a natural hairline, which helps it blend under camera light.
How fast is dispatch and delivery?
Stock units are sent within 24 hours. Transit time is typically 4 to 10 days depending on destination.
Can I return it if the colour is wrong?
Yes, if the unit has not been used, cut, styled, washed, or recoloured, it can be returned within 30 days.
Do you supply salons and distributors?
Yes. Send your base type, size, and colour list via WhatsApp and we will quote the range you want to stock.
What colour codes are available?
Available colours include 1A#, 1B#, and 3#. The 8 by 10 inch size supports additional codes beyond these.
Ask About E-AN: Lace Front Mono with PU Mens Lace Front Hair System Hair Piece Tou
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.