Customized LT-1# 6.3X7.8-HLG
Customized LT-1# 6.3X7.8-HLG is a men's hair system built on a full Swiss lace top base with a 2 inch NPU strip at the back. The unit features 2 pieces of human hair in colour code 2# and 1 piece in colour code 3#, with a freestyle hairstyle and straight hair texture. The base measures 6.3 inches in width and 7.8 inches in length, with a hair density of 140%. The front hairline uses a frontform C construction for a natural look, and the unit is made to the customer's exact template. It is produced in the factory and shipped after completion.
Key Benefits
- Full Swiss lace top provides a breathable base that reduces heat buildup during daily wear
- Frontform C construction supports a natural-looking hairline with a soft, flexible edge
- NPU strip at the back offers a smooth surface for tape or adhesive attachment
- 140% density delivers a full, voluminous appearance without looking artificial
- Straight hair texture allows for easy styling and consistent parting
- Made to the customer's exact template ensures a precise fit and natural coverage
Problems It Solves
- Lace bases that feel stiff or unnatural due to rigid construction
- Hairlines that appear too sharp or artificial with a flat, rigid edge
- Units that don't fit the wearer's scalp shape due to standard sizing
- Lack of breathability in full skin or thick mono bases during long wear
- Mismatched colour tones when blending multiple hair pieces in one unit
Who It Is For
- Men with irregular or asymmetrical hair loss patterns needing a custom base size
- Wearers who want a breathable lace top without the stiffness of a full mono base
- Hair replacement studios fitting clients with unique scalp shapes or colour requirements
- Barbers who need a unit with a clean, flexible front edge for in-head styling
- Wholesale buyers seeking a high-density, customisable lace top for resale
Where It Is Worn
- Daily wear in warm climates where breathability is essential
- Clients who prefer a natural-looking hairline with a soft edge that moves with the scalp
- Salons fitting a client who needs a custom-sized unit with a specific colour blend
- Wearers who style their hair frequently and need a base that resists stiffness
- Distributors stocking a custom base type with a high-density, freestyle look
Technical Features
- Full Swiss lace top base with a frontform C hairline construction
- 2 inch NPU strip at the back for secure tape or adhesive attachment
- Hair density of 140% for a full, natural volume
- Straight hair texture with cuticles aligned in one direction
- Base size of 6.3 inches wide by 7.8 inches long, custom to the client's template
- Two pieces of human hair in colour code 2# and one piece in colour code 3#
Specifications
| Model | LT-1# 6.3X7.8-HLG |
|---|---|
| Base Type | Full Swiss lace top with frontform C hairline |
| Base Size | 6.3 inches wide by 7.8 inches long |
| Hair Texture | Straight hair |
| Density | 140% |
| Hair Colour | 2 pieces in colour code 2#, 1 piece in colour code 3# |
| Hairstyle | Freestyle |
| Attachment Strip | 2 inch NPU strip at the back |
| Construction | Frontform C for natural hairline |
| Hair Type | Human hair |
| Customization | Made to customer's template |
Materials
- Swiss lace base material for breathability and natural edge
- NPU polyurethane strip for rear attachment
- Human hair with cuticles aligned in one direction
- Frontform C construction for soft, flexible hairline
How It Is Made
- Base is cut to the customer's template of 6.3 inches by 7.8 inches
- Swiss lace is prepared and the frontform C hairline is constructed
- Human hair in colour codes 2# and 3# is ventilated into the base
- Hair is styled into a freestyle shape with straight texture
- NPU strip is bonded across the 2 inch rear section
- Unit is inspected for fit, density and hairline before packing
Quality Checks Before Dispatch
- Base size measured against the 6.3 x 7.8 inch template
- Hair density checked against the 140% target across front, mid and crown
- Frontform C hairline inspected under light for softness and natural edge
- Colour codes verified against the ordered 2# and 3# specification
- NPU strip checked for even bonding and secure attachment
Customisation Options
- Base size adjusted to the customer's own template or measurements
- Hair colour selected from the full code range including 2# and 3#
- Density changed from 140% to a different level if needed
- Hair texture changed from straight to wave or curl if required
- Hairstyle modified from freestyle to a specific style such as part, fringe or fade
- Base type changed to full French lace, fine welded mono or skin if breathability or thinness is a priority
How It Compares
| Full thin skin poly system | Swiss lace breathes better and feels lighter but does not give the same fully seamless scalp look |
| Full fine welded mono base | Swiss lace is more breathable and flexible but may shed knots sooner at the perimeter than welded mono |
| Full French lace system | Swiss lace has a finer, more natural edge but may be slightly less durable than French lace under frequent washing |
Use And Care Guide
- Use your own scalp template to ensure the base fits your shape
- Cut the base to your template line before the first fitting
- Attach with tape or liquid adhesive on the NPU strip at the back
- Style the freestyle hair in a way that blends with your natural hairline
- Wash with a gentle wig shampoo and avoid alcohol-based products on the lace
- Clean adhesive residue from the NPU strip after each removal to maintain bond strength
Other Units Buyers Compare With This
Questions About This Unit
How long does a Swiss lace system last?
The lifespan depends on how often you wash, style and re-attach the unit. Frequent use and washing will reduce the life of the lace and knots over time.
Can I change the base size from 6.3 x 7.8 inches?
Yes. Send your own template or measurements and we will build the same base type to your size.
Is the frontform C hairline natural on camera?
Yes. The frontform C construction gives a soft, flexible edge that blends well with the scalp, especially under normal lighting.
How fast is delivery after order?
Custom production time is 8 to 10 weeks. Rush orders take 6 to 8 weeks, double rush 4 to 5 weeks, and crazy rush 15 to 23 days.
Can I return the unit if the colour is wrong?
Yes, if the unit has not been used, cut or recoloured. Returns are accepted within 30 days.
Do you supply salons and distributors?
Yes. Send your base type, size and colour list on WhatsApp and we will quote the range you want to stock.
What colour codes are available?
The full men's colour range includes codes from 1# jet black through 613#, including grey blend codes such as 1B10#, 1B30#, and 1B65#.
Ask About Customized LT-1# 6.3X7.8-HLG
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.