Customized LT-SJ
Customized LT-SJ is a men's hair system built on a full Swiss lace top with a 2 inch NPU strip at the back and a double mono net at the front. The Swiss lace provides a natural-looking hairline with good breathability, while the NPU strip gives a stable surface for tape or glue attachment at the rear. The unit uses 4 inch Indian Remy human hair at 120% density with a straight texture and colour code 430# grey hair. It is made to a custom size of 6.7 inches wide by 8.7 inches long, based on the customer's template. The front knots are bleached and the hairline is shaped in a freestyle form to blend with natural hair growth patterns.
Key Benefits
- Swiss lace front allows for a natural hairline with good breathability compared to full skin or mono
- NPU strip at the back provides a flat, stable surface for tape or glue attachment
- Double mono net at the front strengthens the hairline and helps knots stay in place
- 120% density gives a full look without excessive bulk
- 4 inch hair length is suitable for styling with parting or layering
- Bleached front knots reduce knot visibility under bright light
Problems It Solves
- Lace hairlines that shed knots or thin out after a few washes
- Full skin bases that trap heat and feel sealed during long wear
- Visible dark knots at the hairline under direct light or on camera
- Rear tape edges lifting due to lack of a smooth flat surface
- Standard stock sizes that do not match the wearer's scalp dimensions
- Hairlines that look too uniform or artificial when they should follow natural growth
Who It Is For
- Men with irregular or asymmetrical hair loss patterns who need a custom fit
- Wearers who prefer a breathable front over a fully seamless skin base
- Hair replacement studios fitting clients with unique scalp shapes
- Barbers who need a unit with a stable rear edge for tape attachment
- Wholesale buyers building a product line with custom size and lace front options
Where It Is Worn
- Daily wear where the hairline is seen close up in daylight or on camera
- Wearers who need breathability and comfort during long hours in warm environments
- Salons fitting a client with a custom-sized unit that matches their scalp shape
- Clients who want a freestyle hairline that blends with their natural hair growth
- Distributors stocking a customisable base type with a balance of breathability and durability
- Wholesale buyers looking for a repeatable custom unit with a known base type and construction
Technical Features
- Full Swiss lace top with a double mono net at the front hairline
- 2 inch NPU strip at the back for secure tape or glue attachment
- Bleached front knots to reduce knot visibility
- Freestyle front form shaped to match natural hairline patterns
- Indian Remy human hair with cuticles aligned in one direction
- 120% density for a full appearance
- 4 inch hair length with straight texture
- Custom size of 6.7 inches wide by 8.7 inches long
Specifications
| Model | Customized LT-SJ |
|---|---|
| Base Type | Full Swiss lace with double mono net front and 2 inch NPU back strip |
| Base Size | 6.7 inches wide by 8.7 inches long |
| Hair Length | 4 inches |
| Hair Texture | Straight hair |
| Density | 120% |
| Hair Colour | 430# grey hair |
| Hair Type | Indian Remy human hair |
| Front Form | Freestyle |
| Knot Treatment | Bleached front knots |
| Attachment Method | Tape or liquid adhesive on NPU strip |
| Customization | Built to customer's template size and shape |
| Dispatch | Custom production time 8 to 10 weeks |
| Transit Time | 4 to 8 working days to Europe, North America, and Asia |
| Returns | 30 days on unused, uncut, un-recoloured units |
Materials
- Swiss lace material for the front and sides
- Double mono net used at the front hairline for strength
- NPU polyurethane strip at the rear perimeter
- Indian Remy human hair with cuticles aligned in one direction
- Bleaching agent used on front knots to lighten knot colour
How It Is Made
- Base is cut to the customer's template size of 6.7 inches wide by 8.7 inches long
- Swiss lace is applied across the front and sides with a double mono net at the hairline
- NPU strip is bonded across the 2 inch rear section
- Indian Remy human hair is ventilated into the lace and mono base by hand
- Front knots are bleached to reduce visibility under light
- Hair is styled into a freestyle form to match natural hairline patterns
- Unit is washed, dried, and inspected before packing
Quality Checks Before Dispatch
- Base size measured against the 6.7 by 8.7 inch template before packing
- Hairline knots inspected under light after bleaching
- Density checked against the 120% target across front, mid, and crown
- Colour matched to 430# grey hair under daylight before dispatch
- Front form verified to match the freestyle shape on the template
Customisation Options
- Base size changed from stock to your own template
- Hair length adjusted from the stock 4 inches to a different length
- Density raised or lowered from the standard 120%
- Colour selected from the full code range including grey blends
- Front form changed from freestyle to a different shape like straight or curved
- Base construction switched to full skin, mono, or lace front if breathability or thinness is a priority
How It Compares
| Full thin skin poly system | Swiss lace breathes better and feels less sealed but does not give the same fully seamless scalp look |
| Full fine welded mono base | Swiss lace is more breathable and flexible but may shed knots sooner than welded mono under frequent brushing |
| Full French lace system | Swiss lace is stronger and more durable than French lace, especially at the front hairline |
Use And Care Guide
- Make a template of your scalp before ordering to ensure the correct size
- Cut the base back to your template line before the first fitting
- Attach with tape or liquid adhesive on the NPU strip at the rear
- Have the hair cut in on the head so the front blends with your natural hairline
- Wash with a gentle wig shampoo and avoid alcohol-based products on the knots
- Clean adhesive residue from the NPU after each removal to maintain bond strength
Other Units Buyers Compare With This
Questions About This Unit
How long does it take to receive a custom unit?
Custom production time is 8 to 10 weeks. Rush options are available at 6 to 8 weeks, double rush at 4 to 5 weeks, and crazy rush at 15 to 23 days.
Can I change the size after ordering?
Yes, send your own template or measurements and the same base construction can be made to your size.
Will the hairline look natural under bright light?
The front knots are bleached and the double mono net strengthens the hairline, which helps reduce visibility. A full skin base is thinner still if invisibility is the top priority.
How fast is dispatch and delivery?
Custom units are dispatched within 8 to 10 weeks. Transit is normally 4 to 8 working days to Europe, North America, and Asia.
Can I return it if the colour is wrong?
There is a 30 day return window on units that have not been used, cut, or re-coloured. Once a unit is cut in or recoloured it can no longer be returned.
Do you supply salons and distributors?
Yes. Send your base type, size, and colour list on WhatsApp and we will quote the range you want to stock.
What colour codes are available?
The full men's colour range runs from 1# jet black through light browns and 613#, including grey blend codes such as 1B10#, 1B30#, and 1B65#.
Ask About Customized LT-SJ
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.