2 WAC FOR Knitting Machines

Lamps, cables, sensors, switches and low voltage components used on the electrical side of circular knitting machines.

Part groupElectric Parts
Supplied byHUAXIATEX, Beijing

Send a photo of the old part beside a ruler and we will confirm the match before you order.

Product Overview

2 WAC FOR Knitting Machines is listed in our electric parts group for circular knitting machine maintenance. Lamps, cables, sensors, switches and low voltage components used on the electrical side of circular knitting machines.

What This Part Does

The electrical parts on a knitting machine mostly do one of two jobs, they light the needle line so faults can be seen, or they stop the machine when something goes wrong. Both are low voltage circuits, commonly at 6.3 V, 12 V or 24 V, so the correct voltage rating matters more than the physical fit.

Key Benefits

Low voltage parts listed with the voltages they are made for
Lamps and cables that suit the needle line and control panel positions
Keeps a machine stopping on fault instead of running on with a fault

Application Scenarios

Needle line and machine work lighting
Stop motion and detector circuits
Control panel indication
Sensor and switch replacement during service

Who It Is For

Maintenance electricians in knitting mills
Machine rebuilders restoring electrical systems
Distributors supplying machine service workshops

Problems It Solves

Machines run on with a fault because a detector circuit is dead
Lamps failing quickly when the voltage rating is wrong
Cables chafing where they cross the machine frame

Specifications

Specifications for 2 WAC FOR Knitting Machines
Product name	2 WAC FOR Knitting Machines
Part group	Electric Parts
Machine type	Circular knitting machines
Supplier	Beijing Huaxiatex Co. Ltd., Beijing, China
Listed reference photo	Supplied from our own product records

Only values printed on the product name and in our own records are listed here. Dimensions, material and hardness are confirmed against your machine before you order, not assumed.

What to Send Us When You Order

Circuit voltage, commonly 6.3 V, 12 V or 24 V
A photo of the old part and its connector
Machine builder and model
Quantity per machine

Chat on WhatsApp

Use Guide

Confirm the reference against the old part and the machine plate before ordering a full machine set.
Order one complete set per machine where the part is fitted in multiples, so wear is even across the fabric.
Clean the mounting position before fitting. Fly and old oil are the most common cause of a new part not seating.
Check the machine on a short run and measure the fabric before returning it to full production.
Record the reference against the machine so the next reorder does not have to be identified again.

Electric Parts Questions

Does voltage matter for the lamps?

Yes, this is the most common ordering error. A lamp made for one voltage fitted to a different circuit will either be dim or fail quickly. Confirm the voltage before ordering.

Can you match a part from a photo?

For connectors and lamp bases, a clear photo plus the voltage is usually enough. Include the machine model as well.