U3CMOS USB3.0 Stereo Biological C-mount Microscope Camera

Key Benefits

• USB3.0 interface enables 49fps at 1920x1516 resolution for real-time inspection
• Binning modes 1x1, 2x2, 3x3, 4x4 reduce noise and increase frame rate
• Exposure range from 0.06ms to 15s supports high-speed and low-light imaging
• C-mount interface fits standard stereo and biological microscope bodies
• Multiple sensor options from 3.1MP to 18MP suit different magnification and field requirements

Application Scenarios

• Real-time inspection of biological specimens under a stereo microscope with live video output
• High-speed documentation of micro-assembly processes in electronics or watchmaking
• Automated defect detection in quality control using the camera's high frame rate
• Teaching labs requiring live image capture for student viewing on a monitor
• Research labs needing long exposure imaging with low noise and high dynamic range

Who It Is For

• Electronics manufacturers using stereo microscopes for SMD and BGA inspection
• University and school biology labs requiring digital imaging of specimens
• Clinical and veterinary labs needing image capture for diagnostic records
• Research laboratories conducting time-lapse or high-speed imaging
• Precision assembly workshops requiring documentation of micro-assembly steps

Problems It Solves

• A microscope without a digital camera forces manual sketching or photo capture with a separate device
• Fixed frame rates or low resolution limit the ability to capture fast-moving processes
• Incompatible interfaces between camera and microscope require custom adapters
• Lack of exposure control prevents use in low-light or high-contrast environments
• No SDK support limits integration into automated inspection or data logging systems

Technical Features

• C-mount interface for direct attachment to stereo and biological microscopes
• USB3.0 data transfer at up to 480Mbit/sec supports high-resolution, high-frame-rate capture
• Binning modes reduce pixel readout time and increase signal-to-noise ratio
• Exposure control from 0.06ms to 15s allows optimization for fast or dim lighting
• Support for both color and monochrome sensors with gain and white balance adjustment
• SDKs available for Windows, Linux, macOS, and Android for custom integration
• IR-cut filter limits spectral response to 380-650nm for accurate color reproduction
• Ultra-Fine TM Color Engine enhances color fidelity in color sensor models

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Choose between color (C) and monochrome (M) sensor variants
• Select sensor size and resolution based on microscope objective and magnification
• Request SDK integration support for custom software development
• Specify binning mode preference for speed or noise reduction
• Select exposure range and frame rate profile for specific application

Comparison With Other Options

Use Guide

• Attach the camera to a microscope using the C-mount adapter; ensure the flange focal distance is correct
• Connect the camera to a USB3.0 port for full bandwidth; USB2.0 will limit performance
• Use binning modes to increase frame rate or reduce noise depending on lighting conditions
• Adjust exposure time to avoid overexposure in bright light or underexposure in low light
• Use the SDK to control white balance, ROI, and capture settings for automated workflows