0.35X 0.5X 0.63X 0.8X 1X 1.2X Adapter Compatiable for Olympus Microscope

Key Benefits

• Converts Olympus trinocular phototube (35mm OD) to standard C-Mount (25.4mm, 32 TPI) for camera compatibility
• Built-in reduction lenses (1X, 0.63X, 0.5X, 0.35X) match sensor sizes from 1/4" to 4/3"
• Parfocal with all UIS microscope objectives, so focus remains stable when switching lenses
• Telecentric optics reduce light deficiency and maintain image quality at the edges
• Diffraction-limited MTF ensures sharpness across the full field of view
• Aperture fully coupled with the objective's exit pupil for consistent illumination
• Anodized aluminum construction provides durability and thermal stability

Application Scenarios

• Connecting a digital camera to an Olympus BX series microscope for documentation of metallurgical samples
• Using a 1/2" CMOS sensor camera with an Olympus CX2 series microscope in a teaching lab
• Capturing high-resolution images of PCBs with a 1/1.8" sensor using the 0.63X adapter
• Integrating a 1/3" CCD camera into an Olympus IX series microscope for routine inspection
• Matching a 1" sensor camera to an Olympus MX series microscope with the 1X adapter for industrial quality control

Who It Is For

• Electronics manufacturers using Olympus microscopes for PCB and SMD inspection
• University and school labs with Olympus BX/CX series microscopes requiring digital imaging
• Clinical and research labs needing to document samples with C-Mount cameras
• Metallurgy and materials testing labs using Olympus MX/SZX series microscopes
• Quality control teams integrating digital cameras into existing Olympus microscope setups

Problems It Solves

• A trinocular Olympus microscope without a C-Mount adapter cannot accept standard digital cameras
• Mismatched lens reduction ratios cause vignetting or partial sensor coverage
• Non-parfocal adapters force refocusing when switching objectives, slowing inspection
• Poor optical coupling leads to uneven illumination and edge light loss
• Using a generic adapter risks misalignment and image degradation due to non-telecentric design

Technical Features

• Converts Olympus trinocular phototube (35mm OD) to C-Mount (25.4mm, 32 TPI)
• Built-in reduction lenses: 1X, 0.63X, 0.5X, 0.35X
• Telecentric optical design minimizes light fall-off at the sensor edges
• Diffraction-limited MTF ensures high resolution across the full field
• Aperture fully coupled with the objective's exit pupil for consistent exposure
• Parfocal with all UIS microscope objectives, maintaining focus across magnification changes
• Designed for Olympus BX, BX2, CX, CX2, MX, STM, SZX, IX, GX (GX41) series microscopes
• Anodized aluminum body resists corrosion and maintains dimensional stability

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Select from four built-in reduction lenses: 1X, 0.63X, 0.5X, 0.35X
• Choose adapter model based on required sensor size and magnification
• Available for use with Olympus BX, BX2, CX, CX2, MX, STM, SZX, IX, GX series microscopes
• Can be supplied with or without lens cover for storage

Comparison With Other Options

Use Guide

• Verify the Olympus microscope model is in the supported list (BX, CX, MX, etc.) before installation
• Align the adapter with the trinocular phototube and screw in gently until secure
• Select the reduction lens (1X, 0.63X, 0.5X, 0.35X) based on the sensor size of your camera
• Attach the C-Mount camera and ensure the threads are fully engaged
• Check focus and field of view; adjust camera position if needed to avoid vignetting
• Use only with UIS-compatible objectives to maintain parfocality