Microscope Adapter Compatibility and How to Get It Right First Time
The four measurements that decide whether an adapter fits, and what to send us so the right one is quoted.
Four Things Decide the Fit
The port diameter on the microscope, the thread at the camera end, the reduction factor, and the back focus distance. Get all four right and the camera reaches focus with the field you expected. Get one wrong and the image is cropped, vignetted or will not focus at all.
Adapters Are Listed by the Microscope They Fit
Adapters in this catalogue name the bodies they suit, including third-party stereo and inverted microscopes. That is deliberate: fitment is a property of the instrument, not of the camera.
Reduction Is Not Optional
A 1X adapter is right only when the sensor matches the projected image circle. Most modern sensors need 0.5X or lower to see the field the eyepiece shows. Order the reduction against the sensor format.
What to Send Us
The microscope brand and model, the trinocular port type if you know it, the camera model or its sensor format, and whether you need the recorded field to match the visual field. Those four answers are enough to confirm a part before you order.
Where To Look In The Catalogue
14 productsMicroscope Adapter
Adapter components that connect microscope eyepieces, objectives or camera ports to other optical or imaging systems, enabling flexible configuration of magnification, focus and imaging output.
11 productsStereo Microscope Adapter
Adapters that connect a C-mount camera or phototube to a stereo microscope objective for digital imaging or photographic capture.
Frequently Asked Questions
Can I use a camera adapter meant for another brand?
Sometimes, when the port diameter and thread happen to match. Do not assume it; send us both models and we will check.
The camera will not reach focus. What is wrong?
Usually back focus. The adapter is holding the sensor at the wrong distance from the port. A different adapter length, not a different camera, is the fix.
Ask Before You Order
Send the model you are considering and the task it has to do. We will confirm the fit in writing.