MC100-3D Digital Video Measuring Microscope

Key Benefits

• 100mm working distance allows tools, probes or fixtures to remain under the optics during measurement
• 3.0 megapixel USB2.0 camera delivers 2048x1536 resolution for precise dimensional readings
• Live video output to a monitor enables multiple operators to view the same measurement in real time
• Fixed 1X objective with 0.7X to 4.5X zoom eliminates the need to swap objectives during inspection
• Built-in camera and USB2.0 interface require no external power supply, simplifying setup

Application Scenarios

• Measuring hole diameter and edge length on PCBs during incoming inspection
• Verifying the alignment of micro-contacts in a connector housing
• Documenting the flatness and surface features of a machined metal part
• Teaching measurement techniques in a vocational training lab using a shared monitor
• Performing repeatable measurements on small components in a watchmaking or jewellery workshop

Who It Is For

• Electronics manufacturers inspecting PCBs, connectors and SMD components
• Precision assembly workshops in watchmaking, jewellery and micro-mechanics
• Quality control teams requiring documented measurements with visual proof
• Technical training labs teaching dimensional inspection and measurement principles
• Research labs performing non-destructive surface and feature analysis

Problems It Solves

• A fixed magnification microscope forces the operator to move the part or change optics to measure different features
• No camera means measurements must be recorded by hand or with a separate camera system
• Short working distance prevents the use of probes, gauges or tools under the optics during measurement
• Separate camera and microscope systems often have mismatched tube diameters or focus planes
• Lack of live video output limits collaboration between operators or documentation for reports

Technical Features

• Fixed 1X objective with 0.7X to 4.5X zoom range for consistent focus across magnification
• Progressive scan CMOS sensor with 3.18um x 3.18um pixel size for sharp image capture
• USB2.0 interface at 480Mbit/sec transmits image data and powers the camera simultaneously
• 100mm working distance allows tools and fixtures to remain under the optics
• Live video output to a monitor enables real-time measurement and shared viewing
• Binocular head with 55~75mm interpupillary adjustment for user comfort and handover

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Binocular head configuration available; trinocular head not specified in source
• Optional eyepieces from WF15X to 30X to extend magnification to 3.5X-270X
• Optional auxiliary objectives from 0.3X to 2X to adjust working distance between 30mm and 165mm
• Camera upgrade to 1.3Mp, 3Mp or 5Mp CMOS sensors
• Stand configuration not specified; standard setup is assumed

Comparison With Other Options

Use Guide

• Set the interpupillary distance between 55mm and 75mm before focusing to ensure a merged image
• Focus at the highest magnification first, then zoom out to maintain focus across the range
• Keep the 100mm working distance in mind when placing tools or fixtures under the optics
• Connect the camera to a USB2.0 or faster port; the camera draws power from the same cable
• Use 7 frames per second at full resolution; reduce resolution if smoother live motion is needed