DMSZ Series Digital Inspection Microscope

Key Benefits

• 150mm working distance allows room for tools, probes, or components during inspection and assembly
• Built-in CMOS camera streams live video over USB2.0, eliminating the need for a separate camera and adapter
• Magnification extends to 200X with optional objectives and eyepieces, supporting detailed inspection without changing the base unit
• Adjustable illumination with ring light and cold light source improves contrast on reflective or low-contrast surfaces
• Real-time digital output enables immediate documentation and sharing of inspection results

Application Scenarios

• SMD and BGA rework with live image on a monitor for operator guidance
• Incoming inspection of small mechanical parts, connectors, and electronic components
• Documentation of solder joints, wire bonds, or surface defects for quality reports
• Teaching or training sessions where multiple people view the same image on a screen
• Precision assembly in watchmaking, jewellery, or micro-mechanical systems with hands working under the optics

Who It Is For

• Electronics manufacturers performing PCB, SMD, and BGA inspection and rework
• Quality control departments requiring image documentation for inspection records
• Teaching laboratories and training centers in electronics and engineering
• Precision assembly workshops in watchmaking, jewellery, and micro-mechanics
• Research and development labs needing digital image capture for analysis

Problems It Solves

• A fixed magnification microscope forces the operator to swap objectives when moving from locating a defect to inspecting it
• Separate camera and microscope setups often mismatch in tube diameter, eyepiece field, or interface
• Short working distance instruments restrict the use of tools like soldering irons or probes under the optics
• No digital output requires manual sketching or verbal description of defects instead of visual evidence
• Lack of adjustable illumination leads to poor visibility on shiny or uneven surfaces

Technical Features

• Fixed 1X objective with 150mm working distance for hands-on operations
• 10X eyepiece with field number 20mm for a wide viewing area
• Built-in CMOS camera with USB2.0 interface for image transmission and power
• Adjustable ring light and cold light source for improved surface contrast
• Magnification range extends from 10X to 200X with optional objectives and eyepieces
• Real-time video output for live inspection and immediate documentation
• Standard configuration includes a fixed stand with adjustable height and tilt
• Supports both binocular and trinocular head configurations for dual use of optics and camera

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Binocular or trinocular head on the same DMSZ body
• Optional objectives from 0.5X to 2X to adjust magnification and working distance
• Eyepieces from WF15X through 30X to extend the magnification to 200X
• Upgrade to higher resolution CMOS camera if needed
• Alternative stands from the digital microscope stand range

Comparison With Other Options

Use Guide

• Set the interpupillary distance to match your eyes before focusing to ensure a merged image
• Start focusing at the highest magnification and then zoom out to maintain focus across the range
• Use the adjustable ring light and cold light source to optimize contrast on reflective or low-contrast surfaces
• Connect the camera to a USB2.0 or faster port; the camera draws power from the same cable
• Expect 30 frames per second at 1280x960 resolution; reduce resolution if smoother motion is needed